Nội dung toàn văn Decision No. 12/2003/QD-BTC of January 24, 2003, promulgating the rates of charges for inspection of the technical safety and quality of equipment and supplies falling under the scope of supervision by Vietnam registry
THE MINISTRY OF FINANCE | SOCIALIST REPUBLIC OF VIET NAM |
No: 12/2003/QD-BTC | Hanoi , January 24, 2003 |
DECISION
PROMULGATING THE RATES OF CHARGES FOR INSPECTION OF THE TECHNICAL SAFETY AND QUALITY OF EQUIPMENT AND SUPPLIES FALLING UNDER THE SCOPE OF SUPERVISION BY VIETNAM REGISTRY
THE MINISTER OF FINANCE
Pursuant to the Government's Decree No. 86/2002/ND-CP of November 5, 2002 defining the functions, tasks, powers and organizational structure of the ministries and ministerial-level agencies;
Pursuant to the Government's Decree No. 178/CP of October 28, 1994 on the tasks, powers and organizational structure of the Ministry of Finance;
Pursuant to August 28, 2001 Ordinance No. 38/2001/PL-UBTVQH on Charges and Fees; pursuant to the Government's Decree No. 57/2002/ND-CP of June 3, 2002 detailing the implementation of the Ordinance on Charges and Fees;
At the proposals of the Ministry of Communications and Transport in Official Dispatch No. 4283/GTVT-TCKT of November 13, 2002 and of the director of the Enterprise Finance Department,
DECIDES:
Article 1.- To promulgate together with this Decision the Regulation on the rates of charges for inspection of the technical safety and quality of equipment and supplies falling under the scope of supervision by Vietnam Registry, including:
1. Charges for approval of the designs of equipment and supplies.
2. Charges for inspection of the quality of products.
3. Charges for inspection and certification of laboratories, testing stations and establishments manufacturing materials and products.
4. Charges for inspection of the quality of containers.
5. Charges for inspection of the quality of lifting equipment;
6. Charges for inspection of the quality of boilers and pressure equipment.
7. Charges for inspection of equipment and supplies by non-destruction methods.
8. Charges for examination of welders and non-destruction testers.
Article 2.- The charge rates in this Table of Charges are inclusive of value-added tax but exclusive of the fee for the granting of technical safety and quality certificates as well as expenses for accommodation, travel and communication in service of the inspection works conducted at places over 100 km far from the inspection offices.
Article 3.- For inspection works not yet specified in this Table of Charges, the inspection charges shall be calculated according to the inspection duration at the rate of VND 100,000 per hour. The minimum charge per inspection is VND 100,000/inspection.
Article 4.- The charge payers prescribed in this Decision are organizations and individuals for whom the Vietnam Registry offices inspect the quality of their equipment and supplies installed on transport means; inspect the standards of manufacturing establishments, testing stations, laboratories, and other subjects falling under the scope of supervision by Vietnam Registry or at request..
Article 5.- A number of terms used in this Table of Charges are construed as follows:
1. Single products are products manufactured separately for installation and use on transport means and marine projects.
2. Model products are products made for the first time to satisfy the requirements of current technical norms and standards, serving as a basis for permitted mass production.
3. Mass-manufactured products are products manufactured in lots compatible with the approved model products.
4. Charge calculation prices are selling prices for home-made products or buying prices or imported products.
Article 6.- This Decision takes effect as from February 1, 2003 and replaces the Table of Charges for inspection of industrial equipment, supplies and products, prescribed in Decision No. 129/1999/QD-BVGCP of December 16, 1999 of the Government Pricing Committee on the charges for services of registry of sea ships, inland waterway means and industrial products of Vietnamese organizations and individuals, which fall under the scope of registration by Vietnam Registry, and relevant guiding documents.
Article 7.- Organizations and individuals being charge payers, inspection agencies and concerned agencies shall have to implement this Decision.
FOR THE MINISTER OF FINANCE |
TABLE OF CHARGES FOR INSPECTION OF THE TECHNICAL SAFETY AND QUALITY OF EQUIPMENT AND SUPPLIES FALLING UNDER THE SCOPE OF SUPERVISION BY VIETNAM REGISTRY
(Promulgated together with Decision No. 12/2003/QD-BTC of January 24, 2003 of the Ministry of Finance)
I. CHARGES FOR APPROVAL OF THE DESIGNS OF EQUIPMENT AND SUPPLIES
1. The charge rates for approval of the designs of equipment or supplies shall be calculated in % of the costs of the designs of equipment or supplies specified in Table 1.
Table 1
Ordinal number | Cost of design (in VND million) | Charge rates (%) |
1 | Up to 10 | 6.0 |
2 | Between over 10 and 50 | 5.5 |
3 | Between over 50 and 100 | 5.0 |
4 | Between over 100 and 200 | 4.5 |
5 | Over 200 | 4.0 |
2. The charge rates for approval of the transformation or repair designs shall be equal to 70% of those specified in Table 1.
3. The charge rates for duplication of the approval decisions or approval of modifications of the approved designs shall be equal to 30% of those specified in Table 1.
II. CHARGES FOR INSPECTION OF THE QUALITY OF PRODUCTS
The charge rates for inspection of the quality of products shall be calculated in percentage of the manufacture costs; the prices of product lots or the buying prices of imported products specified in Table 2.
Table 2
Ordinal number | Inspected objects | Charge rates (%) | Minimum (in VND thousand) charge |
1 | Model or single products | 1.0 | 500 |
2 | Mass-manufactured or imported products | 0.5 | 300 |
III. CHARGES FOR INSPECTION AND CERTIFICATION OF LABORATORIES, TESTING STATIONS, AND ESTABLISHMENTS MANUFACTURING MATERIALS AND PRODUCTS
The charge rates for inspection and certification of laboratories, testing stations or establishments manufacturing materials and products are specified in Table 3.
Table 3
Inspected objects | Charge rates (in VND thousand) | |
First-time inspection | Periodical inspection | |
Laboratories, testing stations and establishments manufacturing materials and products | 2,000 | 1,000 |
IV. CHARGES FOR INSPECTION OF THE QUALITY OF CONTAINERS
1. The charge rates for inspection of the quality of 20-feet containers are specified in Table 4
Table 4
Ordinal number | 20-feet containers | Charge rates (in VND thousand) |
1 | For dry merchandise | 200 |
2 | Isothermal containers for liquid merchandise, and containers of other kinds | 250 |
2. The charge rates for inspection of 40-feet containers shall be the charge rates specified in Table 4 multiplied by co-efficient 1.5.
V. CHARGES FOR INSPECTION OF THE QUALITY OF LIFTING EQUIPMENT
1. The charge rates for first-time and irregular inspections are specified in Table 5.
Table 5
Ordinal number | Lifting capacity (in ton) | Charge rates (in VND thousand) |
1 | Under 1 | 500 |
2 | Between 1 and 3 | 600 |
3 | Between over 3 and 5 | 800 |
4 | Between over 5 and 7.5 | 1,000 |
5 | Between over 7.5 and 10 | 1,500 |
6 | Between over 10 and 15 | 1,700 |
7 | Between over 15 and 20 | 2,000 |
8 | Between over 20 and 30 | 2,500 |
9 | Between over 30 and 50 | 2,700 |
10 | Between over 50 and 75 | 3,000 |
11 | Between over 75 and 100 | 3,500 |
12 | Over 100 | 4,000 |
2. The charge rates for periodical inspection shall be equal to 50% of those specified in Table 5
VI. CHARGES FOR INSPECTION OF THE QUALITY OF BOILERS AND PRESSURE DEVICES
The charge rates for inspection of the quality of boilers and pressure devices are specified in Table 6.
Table 6
Ordinal number | Inspected objects | Calculation unit | Capacity | Charge rates (in VND thousand) |
1 | Boilers | t/h/unit | Under 0.5 | 300 |
Between 0.5 and 1 | 500 | |||
Between over 1 and 2 | 1,000 | |||
Between over 2 and 4 | 1,500 | |||
Between over 4 and 6 | 1,800 | |||
Between over 6 and 10 | 2,200 | |||
Between over 10 and 25 | 4,000 | |||
Between over 25 and 75 | 6,000 | |||
Between over 75 and 125 | 8,000 | |||
Between over 125 and 200 | 13,000 | |||
Between over 200 and 400 | 18,000 | |||
Over 400 | 22,000 | |||
2 | Pressure vessels | m3/vessel | Under 1 | 150 |
Between 1 and 2 | 300 | |||
Between over 2 and 5 | 400 | |||
Between over 5 and 10 | 600 | |||
Between over 10 and 25 | 800 | |||
Between over 25 and 50 | 1,000 | |||
Between over 50 and 100 | 2,500 | |||
Between over 100 and 500 | 4,000 | |||
Over 500 | 6,000 | |||
3 | Gas bottles | Bottle | Standard bottle | 60 |
Non-standard bottle | 80 | |||
4 | Cold system | 1,000 kcal/h | Under 30 | 1,000 |
Between 30 and 50 | 1,500 | |||
Between over 50 and 100 | 2,000 | |||
Between over 100 and 250 | 2,500 | |||
Between over 250 and 1,000 | 3,000 | |||
Over 1,000 | 4,000 | |||
5 | Gas regulating and charging systems | System | System with 20 charging gates or under | 2,000 |
Systems with 21 charging gates or more | 3,000 | |||
6 | Assorted pipelines, excluding solvents | meter | Diameter of 150 mm or under | 10 |
Diameter of over 150 mm | 15 |
VII. CHARGES FOR INSPECTION OF THE QUALITY OF EQUIPMENT AND SUPPLIES BY NON-DESTRUCTION METHODS
1. The charge rates for inspection of the quality of equipment and supplies by non-destruction methods are specified in Table 7.
Table 7
Ordinal number | Inspecting, measuring and testing methods | Calculation unit | Charge rates (in VND thousand) |
1 | Measuring the materials' thickness | Measuring point | 8 |
2 | Scanning defects by ultrasound | Meter of welding line | 80 |
2. The charge rates for inspection by other non-destruction methods shall be as agreed upon with customers.
VIII. CHARGES FOR EXAMINATION OF WELDERS AND NON-DESTRUCTION TESTERS
The charge rates for examination and granting or extension of welder's or non-destruction tester's certificates are specified in Table 8.
Table 8
Ordinal number | Examined or certified subjects | First-time exam | Extension |
1 | Welders | 400 | 200 |
2 | Non-destruction testers | 600 | 300 |
