Thông tư 04/2012/TT-BKH

Circular No. 04/2012/TT-BKH of August 13, 2012, promulgating a list of equipment, machinery, spare parts and special-use vehicles, raw materials, supplies and semi-finished products which can be produced at home

Circular No. 04/2012/TT-BKH promulgating a list of equipment, machinery spare đã được thay thế bởi Circular No. 14/2015/TT-BKHDT promulgating the lists of machinery equipment manufacturable domestically và được áp dụng kể từ ngày 01/01/2016.

Nội dung toàn văn Circular No. 04/2012/TT-BKH promulgating a list of equipment, machinery spare

THE MINISTRY OF PLANNING AND INVESTMENT -------	SOCIALIST REPUBLIC OF VIET NAM Independence - Freedom – Happiness ---------
No. 04/2012/TT-BKHDT	Hanoi, August 13, 2012

CIRCULAR

PROMULGATING A LIST OF EQUIPMENT, MACHINERY, SPARE PARTS AND SPECIAL-USE VEHICLES, RAW MATERIALS, SUPPLIES AND SEMI-FINISHED PRODUCTS WHICH CAN BE PRODUCED AT HOME

Pursuant to the Decree No. 116/2008/ND-CP of November 14, 2008, defining the functions and tasks of the Ministry of Planning and Investment;

Pursuant to the Decree No. 123/2008/ND-CP of December 8, 2008, detailing and guiding the implementation of Value-Added Tax Law No. 13/2008/QH12;

Pursuant to the Decree No. 87/2010/ND-CP of August 13, 2010, detailing the implementation of Law No. 13/2008/QH12, on export tax, import tax;

The Ministry of Planning and Investment promulgates lists of machinery, equipment, spare parts, special-use vehicles, raw materials, supplies and semi-finished products which can be produced at home as follows:

Article 1. To promulgate together with this Circular the following lists:

1. The list of machinery, equipment, spare parts, special-use vehicles which can be produced at home;

2. The list of construction supplies which can be produced at home;

3. The list of raw materials, supplies and component which can be produced at home;

4. The list of supplies necessary for petroleum activities which can be produced at home;

5. The list of raw materials, supplies and semi-finished products for shipbuilding which can be produced at home;

6. The list of raw materials, supplies in direct service of software manufacture which can be produced at home.

Article 2. The lists specified in Article 1 of this Circular used as a basis for exemption, reduction, or Non-taxable object determination of VATm import tax as prescribed in the Goverment's Decree No. 87/2010/ND-CP of August 13, 2010, detailing the implementation of the Law on Import Tax and Export Tax and the Goverment's Decree No. 123/2008/ND-CP of December 08, 2008 detailing and guiding the implementation of the Value-Added Tax Law.

Article 3. Raw materials, supplies, semi-finished products which can be produced at home, specified in one of lists promulgated together with this Circular, shall not be depended on use purpose, except for special-use goods.

The special-use goods as prescribed in this Article are goods when using, they are required to satisfy technical standards indicated in specialist certifications.

Article 4. This Circular takes effect on October 01, 2012 and replaces the Circular 04/2009/TT-BKH , of July 23, 2009 of the Ministry of Planning and Investment guiding the implementation of some provisions on import tax and value-added tax.

In the course of implementation, if arising any problems, they should be reported promptly to the Ministry of Planning and Investment for amendment and supplement studying.

THE MINISTER OF PLANNING AND INVESTMENT

Bui Quang Vinh

ANNEX 1

LIST OF EQUIPMENT, MACHINERY, SPARE PARTS, SPECIAL-USE VEHICLES WHICH CAN BE PRODUCED AT HOME
(promulgated together with the Circular No. 04/2012/TT-BKHDTof August 13, 2012 of the Ministry of Planning and Investment)

No.	Name of item	Code in the import tariff list			Symbols of specifications, description of technical features
No.	Name of item	Heading	Sub-heading
1	Load-bearing rubber pipes of all kinds	4009	10	00
2	Conveyor or transmission belts of all kinds	4010			2,150 mm wide and 100 m long
3	Tyres used on motor cars	4011			Tyres used on light trucks: Maximum payload capacity from 410 kg to 3050 kg, external diameter from 475 mm to 972 mm
		4011			Tyres used on specialty motor cars Maximum payload capacity from 2937 kg to 61500 kg, external diameter from 1220 mm to 3045 mm
		4011	10		TCVN 7532, JIS4230, DOT, SN1, MS 1394
		4011	20		Tyres used on heavy trucks: Maximum payload capacity from 4770 kg to 5525 kg, external diameter from 1020 mm to 1230 mm.
4	Tyres used on motorcycles	4011	40	00
5	Tyres used on bicycles	4011	50	00
6	Inner tubes used on motor cars	4013	10		Sectional diameter from 104 mm to 236 mm, inside diameter from 305 mm to 605 mm
7	Inner tubes used on bicycles	4013	20	00	TC 03-2002/CA
8	Inner tubes used on motorcycles	4013	90	20	TCVN 5721-1, JIS6367, DOT, SN1
9	Oil pipe insulation materials	4016	99	99
10	Leather products used on motor cars	4205	00	40
11	Elastic belts of all kinds	5806	20		80 mm wide and 500 m long
12	Cast-iron pipes and accessories	7303			Gray cast iron, ductile cast iron: Common kinds with diameter from 100-800mm suitble to ISO 2531:1998 national standard.
13	Main parts of desalt equipment:
	- Pipe line	7304	31	90	Tubes, pipes, metal tubes that is hollow or is cast of iron or steel
	- Stainless steel tubes	7304	41	00
	- Tanks, containers	7309			Reservoirs, tanks, vats and similar containers for any material (other than compressed or liquefied gas), of iron or steel, of a capacity exceeding 300 litres, not fitted with mechanical or thermal equipment.
14	Main parts of boiler:
	- Pipe line and installment system used on boiler	7306	30	40	High pressure pipes, thinner than 150 mm
	- Air-venting pipe used on boiler	7306	40	10	All kinds of air-venting pipe used on water-heating boilers
	- Gas-discharge tubes used on boiler	7306	40	10	All kinds of gas-discharge tube used on water-heating boilers
	- Steel structures used on boilers	7308	90		All kinds of steel structure used on water-heating boilers
	- Load-bearing frame used on boilers	7308	90
	- Buckstay used on boilers	8402	90	10	Boiler trunk, shell cover and others
	- high pressure fluidized bed combustion chamber boiler	7309	00	00	Reservoirs, tanks, vats and similar containers for any material (other than compressed or liquefied gas), of iron or steel, of a capacity exceeding 300 litres.
15	Main parts used for boiler heat reclaim
	- pipes	7306	40	10
	- Support load-bearing frame and parts used for boiler heat reclaim	7308	90
	- Boiler header	7309	00	00	Capacity exceeding 100 MW
16	Straight connectors of non-flange	7307			3-1/8”; 1-5/8”
17	Converters of non-flange into flange	7307			3-1/8”; 1-5/8”
		7307			1-5/8” convert into flange 3-1/8”
		7307			3-1/8” convert into flange 4-1/2”
18	Converters of flange	7307			1-5/8” convert into flange 7/8”
		7307			3-1/8” convert into flange 1-5/8”
		7307			4-1/2” convert into flange 3-1/8”
19	Flanged fitting EIA	7307			7/8" used for foam cables 1/2"; 7/8" used for foam cables 7/8"; 1-5/8" used for foam cables 1-5/8"; 3-1/8" used for hollow cables 3-1/8”
20	90^oelbows	7307			Flange 1-5/8"; 3-1/8"; non-flange 1-5/8"; 3-1/8’
21	High-voltage lighting pillars of steel coated hot zinc	7308	20	21	For the grid of up to 500 kV
22	Antenna pillars	7308	20	19	Stay cables of a triangle cross-section of 330 with a height of 21-45 m; stay cables of a triangle cross-section of 660 with a height of 36-66 m; stay cables of a triangle cross-section of 800 with a height of 60-100 m; stay cables of a circle cross-section with a height of 15 m; mobile cable ties - of a height of 10 m
23	All kinds of metallic scaffolds, support pillars and shuttering	7308	40	10	Of common kind
24	Tanks	7309			up to 4,000 m³, with a diameter of up to 57.5 m
25	crude oil/water tanks, ponds	7309			Cylinder, made of steel
26	Container analyzing mixture of water and steam	7309			Used to process chemical, maximum weight is 203 tons; maximum diameter is 6 m; maximum length is 30 m, maximum thickness is 150 mm
27	Distillation tower	7309			Equipment used to change chemical component and raw materials; maximum weight is 700 tons; maximum diameter is 9.5m; maximum length is 100m, maximum thickness is 150mm
28	Thermal exchange equipment	7309			Maximum weigh 200 tons; maximum diameter is 6.5 m; maximum length is 30 m, maximum thickness is 100 mm
29	High-pressure-bearing tanks, tubs, containers	7309			used to transfer chemical component or raw materials; maximum weight is 300 tons; maximum diameter is 9.5m; maximum length is 70m, maximum thickness is 150mm
30	Transverse cylinder pressure tubs	7309	00	00	Storage capacity up to 650m³, working pressure of up to 40 kg/cm2
31	Transverse cylinder pressure tubs laid on specialty vehicles	7309	00	00	Storage capacity up to 40m3, working pressure of up to 40 kg/cm2. specialized in storage of LPG, NH3, Cl2, O2, etc.
32	Pressure-bearing tanks and tanks for compressed gas	7311			up to 1,000 m³, working pressure of up to 100 at; with the multiplication product PV of less than 4,000
33	Spherical pressure tanks	7311	00	19	Storage capacity up to 4400m3, working pressure of up to 40 kg/cm2
34	Anchor chains	7315	82	00	With stud link 2 diameters from 13 to 36 mm
35	Spiral screws	7318
36	Smooth valve gate, curved valve gate, pressure pipe line, trash rack	7325			Hydrotechnic mechanic equipment used for irrigation, Hydro-power works (made of steel with thickness of 6 -40 machinery)
37	Pressure tubes, valve gates, crank of turbine	7325			Made of steel, used for Hydro-power, thickness from 8 -40 mm, pressure higher than 13m
38	Distribution frame	7326	90	99	Optical distribution frame ODF, Intermediate distribution frame IDF
39	Platforms to lay storage containers/pressure containers	7326	90	99
40	Containers for LPG 12 kg.	7613	00	00	Capacity is 26.4 liter, design pressure is 17 kg/cm²; storage weight is 12 kg, max/min thickness is 2.66mm/2.3mm; dimensions of 302 mm x 302 mm x 580 mm
41	Containers for LPG 45 kg	7613	00	00	Capacity is 99 liter, design pressure is 17 kg/cm2; LPG storage weight: 45 kg, max/min thickness is 3 mm/2.95 mm; dimensions of 368 mm x 368 mm x 1210 mm
42	Tanks for LPG	7613	00	00	Storage capacity up to 285 m3, pressure of up to 18 atm
43	Aluminium alloy canoe covers	7616	99	99
44	Boilers to heat water	8402	11	20	generating steam or other vapor, output of up to 500 tons/h, with structure of high pressure fluidized bed combustion chamber or air-circulating
45	Steam boilers for power plants	8402	11	20	Including pressure-bearing parts and components, main accessories of steam boilers; output of up to 1000 MW; pressure of up to 246 kg/cm2 (probably higher at the request of clients), at temporature 300-593⁰C (probably higher at the request of clients); fuel: coal, gas, oil
46	Boilers of all kinds	8402	12	21	Of an output of up to 25 tons/h, a pressure of up to 12 kG/cm2, a working pressure of up to 30 at (fuel: coal, gas, oil, bagasse)
		8402	12	21	Of an output of up to 35 tons/h
		8402	12	29	Of an output of up to 10 tons/h, pressure of up to 20 kg/cm²
47	Heat-recovery boilers used in Thermal-power plants (heat-recovery module)	8402	90	10	Including a pressure-bearing part and main corresponding components, accessories, of an output of 100-250 MW (transverse or vertical tube)
48	Systems of dealing with smoke from boiler	8404	10		Of an output of 3,500 kg/h; smoke and dust cleaning chambers of water film type and closure type (covered by granite), system of circulating pump to deal smoke
49	chimneys	8404	10
50	Diesel engine	8408			Of an output to 50 Hp
51	Ship axis and propeller (cast bronze)	8410	90	00	Properler with diameter of up to 2 m
52	Irrigation water pumps	8413	81	19	Up to Q = 32,000 m³/h, H = 30 - 40 m
53	Air compressors	8414	80		Up to 32 at, 18 m³/h
54	Industrial fans	8414	59		Of an output of up to 100,000 m³/h
54	Industrial fans	8414	59		Of an air flow of 54 m³/h, an impeller diameter of 1.3 m, an output of 1.5 HP, a noise level of under 78.5 dBA, an air humidity of under 80%. for industrial ventilation and waterproof function
55	Partial blowers of caking line	8414	59		Of an capacity of 1450 kw, voltage of 6 kv
56	HV centrifugal blowers of blast furnace	8414	59		Of an capacity of 2395 kw, voltage of 6 kv
57	Air ventilator and cooling equipments using pipes	8415	90		Cooling area of 120m2; an propeller diameter of 618 mm; an engine power of 1.1 kW; water basin capacity of 25 litres dimensions of 985 x 985 x 1070 mm, weight of 98 kg
58	Cyclones and furnaces of all kinds	8416			Up to 3.5 m³/h, a furnace's diameter of up to 5 m, a corrugated iron thickness of up to 50 mm
59	Equipment for production of baked bricks of all kinds	8416			Of an output of up to 20 million bricks/year
60	ED-painted driers	8419			3 drawers (6 shelves/drawer)
61	Electrostatic precipitator	8417	10	00	In main engine of rotary furnace
62	Air guns	8417	10	00	In main engine of rotary furnace
63	screw conveyor	8417	10	00	In main engine of rotary furnace
64	Rack conveyor	8417	10	00	In main engine of rotary furnace
65	Feeder	8417	10	00	In main engine of rotary furnace
66	Apron Feeder	8417	10	00	In main engine of rotary furnace
67	Tertiary air duct	8417	10	00	In main engine of rotary furnace
68	Feeder System of powder coal	8417	10	00	FSR quality (for furnace head) in main engine of rotary furnace
69	Thermal slot	8417	10	00	diameter of 1800 machinery, in main engine of rotary furnace
70	Cooling tower	8417	10	00	In main engine of rotary furnace
71	High temperature electrical valve	8417	10	00	In main engine of rotary furnace
72	Electrical plate valve	8417	10	00	In main engine of rotary furnace
73	load chains	8417	10	00	In main engine of rotary furnace
74	Incinerators for medical waste	8417	80	00	Of an output of: 3 kg/h, fuels: LPG, fuel consumption of 2.5kg/h, use of 100 litres of water per hour; incineration frequency: 2 times temperature of primary incineration chamber: 300-900°C, temperature of secondary incineration chamber: 900-1,100°C; voltage: 220V, single phase 50Hz, power of 1,000w, materials in incineration chamber: fire bricks, heat-isolated materials: mineral fibre + rockwool: materials used in the incinerator's body and fans: stainless steel, used premises: 3 x 2.5 x 3 m; exhaust fumes satisfying TCVN 5939-1995
74	Incinerators for medical waste	8417	80	00	Symbol: THL 50RY: Output of 50 kg/h, fuels: Oil (consumption of 8 litres/h, circulation water), electricity of 7.5 Kw/h. Structure of incinerator: Steel cover (INOX SLS 316), heat-isolated bricks, chrome fire bricks. materials of incinerator: Steel – direct touching parts made of Inox 316. Technical kỹ thuật:<}0{>characteristics: Burn a ton, oval incinerator for covering burning, temperature in furnace is 1300⁰C, exhaust is cooled fast All fume dust is controlled to absorb into water,then is filtered through the filtering system ensuring that it satisfies the sewage standard of Vietnam Exhaust is filtered through activated- carbon- air-filtering system ensuring the exhaust standard of Vietnam
75	Equipment for production of pure ice	8418	10	90	Parameters of big machines: ice cube size of 48 x 80 mm, an output of 9-10 tons/24h, 400 kg/batch, power consumption level of 0.085 kwh/kg of ice, the compressor's output of 50 HP
76	Refrigerating chambers (ashore)	8418	10	90	Joined with Polyurethane panels, insulated, two sides covered with tole, plastic-coated, refrigerating chambers are of a height of up to 10 m and capacity of up to 20,000 m³
77	Flake ice-makers	8418	69	50
78	Cabinet dryers	8419			Of types of between 30 and 200 litres
79	Pastry driers	8419			Of a productivity of 15 kg/h, entry humidity of 50% and exit humidity of 14%, electric power of 20 kw, adjustable drying temperature, dimensions of 1 x 1, 3 x 1.5 m, tole-made covering
80	Sterilizing autoclaves	8419	20	00	Of types of 20, 52 and 75 litres
81	Fluidized bed driers	8419	31	10	Used in stage of coconut production, scraping, drying, of an output of 8-20 tons per day
82	Cocopeat driers	8419	31	10	Used in cocopeat drying, of an output 8-20 tons per day
83	Rotary dryers of all kinds	8419	39		Of an output of up to 1 tons/h
84	Granulating fluidized bed dryers	8419	39	19	Used in production lines of medicine for cattle, of an output of 40-100 kg/h, volume of dryer: 400 litres, heat power: 45kw, drying temperature: 70-80⁰C
85	Spray dryers	8419	39	19	Of an output of 2 litres/g, intake air temperature of 180-350°C, outtake air temperature of 40-80°C, output of 12kw, with variable spraying speed control
86	Equipment for saline water conversion, multi-layer type	8419	89	19	With better method, ouput from 10 MIGD (1 MIGD = 4,546,000 litres per day)
87	Equipment for saline water conversion, condensation and multi-effect type	8419	89	19	Minimum output of 1 MIGD (1 MIGD = 4,546,000 litres per day)
88	Block brick-pressers	8420	10	90	Up to 600 bricks/h, 13 kW
89	Water filters	8421	21	19
90	Industrial water filters	8421	21	19	Of an output of 6 tons/h, electric capacity of 25 kw
91	Equipment for saline water conversion, reverse osmosis type	8421	21		Electrically operated, of an output of 500 litres/h
92	Purifying machinery of EDIR paint used in ED brightening	8421	29	90
93	Sleeve filters	8421	39		All of kinds
94	Raw air filters	8421	39	90	Level under Euro standard (EN-779) from G2 to G4; productivity of 70-92%, material of synthetic paint, probably washed, frame of paper, aluminium
95	Pure air filters	8421	39	90	Level under Euro standard (EN-779) from F5 to F9; productivity of 50-95%, material of fibre-glass Frame of plastic, aluminium
96	Hepa air filters	8421	39	90	Level under Euro standard (EN-779) from H10 to H14; productivity of 95-99,999%, material of fibre-glass; frame made of plastic, timber, aluminium,tin-plate
97	Automatic sprayers used for wash tank	8424	20	19	Of an output of 3.5 kw, voltage of 380 V
98	Sluice-gate closing and -opening machines, operated by electric motor	8425	11	00	Of a lifting capacity of up to 100 tons
99	Sluice-gate closing and -opening machines, hand-operated	8425	19	00	Of a lifting capacity of up to 30 tons
100	Winches, operated by electric motor	8425	31	00	Of a lifting capacity of up to 50 tons
101	Winches of all kinds	8425	39	00	Of a lifting capacity of up to 10 tons
102	Hydraulic jacks for tunnel furnaces	8425	42		Of a thrust of up to 60 tons, a stroke of 1.6 m
103	Electric hoist, winches	8425	49	10	hung, of a lifting capacity of up to 5-500 tons
104	Rotate derricks running on rail	8426	11	00	High derricks installed in fixation to form wharf: Of a lifting capacity of up to 35 tons
105	Cranes loading and unloading container, running on rail	8426	11	00	RMQC, heigh is 68-78 m, width is 26-28 m, length is 115-145 m RMQC, heigh is 21 m, width is 24 m, length is 64 m
106	Kicker cranes	8426	11	00	Of a lifting capacity of from 5 tons to 350 tons
107	Rubber-type derricks	8426	12	00	movable frame fixed with rubber tyres and pedestals: Boom of ship, derricks, including cable cranes, movable frame, pedestals and truck fixed with a derrick. Of a lifting capacity of up to 30 tons
108	Cranes loading and unloading container, running on rubber-tyres	8426	12	00	RTGC, heigh is 26 m, width is 14 -16 m, length is 25-26 m
109	Gantry cranes	8426	19	30	Of a lifting capacity of up to 700 tons (used in ship-bulding, Hydro-power)
110	Bridge cranes	8426	19	20	Of one-beam type (of a lifting capacity of up to 700 tons, a span of up to 25 m) Of two-beam type (of a lifting capacity of up to 1200 tons, a span of up to 34 m) Of tower type (of a lifting capacity of up to 30 tons, a reach of up to 25 m)
111	Kicker bridge cranes	8426	19	90	Lifting capacity of up to 350 tons
112	Tower bridge cranes	8426	19	90	Lifting capacity of up to 30 tons, used in construction of high buildings
113	Container cranes	8426	19	90	Lifting capacity of up to 50 tons, used for seaports
114	Sprocket cranes	8426	19	90	Lifting capacity of up to 200 tons
115	Cranes on river ships, sea ships	8426	19	90	Lifting capacity of up to 540 tons
116	Rubber-tyre cranes, hard boom	8426	41	00	Lifting capacity of up to 200 tons, used in construction, transportation
117	Small truck hoists	8427	90	00	Type running on two beams (5 to 700 tons)
118	Lifts	8428	90	90	Lifting capacity of up to 500 kg - 3 kw
119	Conveyor screws of all kinds	8428	90	90	Diameter of up to 600 mm, 30 m length
120	Elevators	8428	10	10	For carrying humans (of a load of up to 2 tons and a speed of up to 1.5m/s) For carrying goods (of a load of up to 5 tons and a speed of up to 1.5m/s)
121	Machines to get plastic products (vertical)	8428	90	90	dimensions: 1750 mm length, 1100 mm width, revolving angle of main hand 90⁰.(error in locating of transverse move ±1 mm, repeated error of transverse position ±1 mm, error in locating of coordinating move ± 0.1 mm, repeated error of coordinating position ±0.1 mm) control location by frequency converter and position switch, coding and controlling with control panel using Atmel 89 C5X microprocessing combine with display showing LCD data
122	Bucket Feeder	8428	10	90	up to 60 m³/h
123	Cranes to load and unload goods continuosly, bucket type	8428	20	90	Aotomatic and uncorrupted lifting and other conveyor belt. Minimum lifting output of 1,000 tons/h, load and unload goods continuosly
124	Conveyor buckets of all kind	8428	32		up to 160m³/h,105m heigh
125	Wagons of tunnel furnaces	8428	39	90
126	Lifts with lifting capacity of 500 kg	8428	90	90
127	Lift	8428	90	90	Heigh 0-80 metre, P between 500 kg and 2000 kg
128	Rubber-tyre static motor rollers	8429	90	90	10 – 12 tons
129	Stell-tyre tatic motor rollers	8429	90	90	6 – 12 tons
130	Vibratory steel-tyred motor rollers	8429	90	90	A vibrating load of up to 10 tons
131	Cluster of rollers attached with speed reduction of types of cranes	8431	39	90
132	Rock and soil drilling buckets	8431	41		Ф: 600-2200 mm
133	Rock and soil dredging buckets	8431	41		Ф: 600-2200 mm
134	Concreting tube sets	8431	43	00	Ф: 219-273 mm, length 80 m
135	Cleaning blow-tubes	8431	43	00	Ф: 89 mm, length 80 m
736	Crane bridge girdes	8431	49	90	A lifting load of from 0.5 tons to 150 tons
137	Sugarcane-planting combined machines	8432	30	00	Making cuts and fertilizing before planting at a capacity of 0.2 ha/h, with more than 40,000 cuttings and a working width 1.4 m
138	Soil ploughs and rollers	8432	10	00
139	Combined harvesters and threshers	8433	51	00	Of an output of 4-5 ha per day, of a cutting width of 1.8m, moved by chains, of a weight of: 2 tons, automatic cutting, threshing and packing of rice
140	Spreading rice harvesters	8433	51	00	Of a cutting width of 1.2 -1.5 m; an output of up to 0.5 ha/h
141	Combined harvesters and threshers	8433	51	00	Of a cutting width of 2.2 m; an output of up to 90 CV
142	Rice-threshers	8433	52	00	with or without motor, of an output of up to 2.5 tons/h
143	Combined sugarcane harvesters	8433	59	90	Of a capacity of 0.3-0.5 ha/h, automatically cutting tops, roots and conveying back in rows
144	Milking machines	8434	10	10	Operated by single-phase motor of a power of 1.1 kW, a speed of 4,450 rounds/minute, double-pace type, and up to the food quality, hygiene and safety standard
145	Ostrich egg incubators	8436	21		AT-252, of a capacity of 252 eggs/batch
146	Fish feed pelletting machines	8436	80		Of a capacity of 1,500 kg/h, an output of 75 kW, a weight of 2,600 kg, and dimensions of 3,000 x 2,500 x 3,000 mm
147	Export rice-processing lines	8437	10		Of an output of 10 tons/h
148	Rice-husking machines	8437	80	10	Of an output of 6 tons/h
148	Rice-husking machines	8437	80	20
149	Rice-polishing machines of all kinds	8437	80	51	Of an output of 6 tons/h
150	Beer production lines	8438	40	00	Of an ouput of up to 90 milion litre/year
151	Coffee grinders	8438	80	11	Fresh, dry grain
152	Fish powder processing lines	8438	80	91	Of an output of 80 tons materials/day
153	Pie filling extruders	8438	80	91	Of a capacity of 2,400 products/h, with a filling weight of 8-20 g (an error of 0.5 g)
154	Food production lines for raising abalone	8438	80	91	Grinder + fan + cyclone: 1x1x2 m, of a productivity of 2 kg/h, of an output of 5 kw Mixer: 0.7 x 0.4 x 0.4 m, of a productivity of 2 kg/h, of an output of 1 Hp; Cutter: 0.6 x 1 x 1 m, of a productivity of 2 kg/h, of an output of 3 kw; Conveyor belt dryer: 0.6 x 2 x 1 m, of a productivity of 2 kg/h, of an output of 10 kw;
155	Walter cake moulds	8438	90	19	Of a size of 218 x 200 mm, grey cast iron materials, rift between upper mould and under mould is 1.6 ± 0.1 mm, capable to fit with moulds imported from foreign countries
156	Krap paper production lines	8439	20	00	Of an output of 1,000 – 10,000 tons/year
157	Votive paper production lines	8439	20	00	Of an output of up to 2,000 tons/year
158	Tissue paper production lines	8439	20	00	Of an output of up to 2,000 tons/year
159	Machines producing adiabatic cooling pads	8439	20	00	Materials: cellulose; angle between two adjoining pads: 45/45 (a total of 900); evaporating surface: approximately 460m2/m3; water flow: 60l/m²
160	Stamp-removing and postage-printing machines	8443	39
161	Offset printers, reel printing	8443	11	00
162	Offset printers, sheet printing	8443	12	00	Of a kind used in offices (using paper of a size not exceeding 22 cm in one dimension and 36 cm in the other dimension)
163	3D-letters and reel printers, excluding flexography printers	8443	14	0
164	3D-letters printers, excluding reel printers and flexography printers	8443	15	0
165	Flexography printers	8443	16	0
166	Photo printers on zincograph	8443	17	0
167	Printers - photocopiers, with inkjet printing technology	8443	31	10
168	Printers - photocopiers, with laser printing technology	8443	31	20
169	Combined printers, photocopiers and fax machines	8443	31	30
170	Dot matrix printers	8443	32	10
171	Inkjet printers	8443	32	20
172	Laser printers	8443	32	30
173	Fax machines	8443	32	40
174	Automatic thread cutters in industrial sewing machines	8445	90		seam programming and automatic control of seam needles
175	PP bag weaving machines	8447	90		MDB-4, of a capacity of 1.7-2m/minute
176	Tubular knit fabric anti-folding machines	8448	59	00	AC-680, of a speed of 10-40 m/minute
177	Washing machines of all kinds	8450			Including kinds with automatic dryers
178	Parts of washing machines	8450	90
179	Cathode plate made of stainless steel 316 litre used for color-dyeing tub.	8451	90	90	Dimensions of 500 x 3350 x 2 (mm)
180	Toothed rough rolling machines	8455	10		up to d = 800 mm, l = 400 mm, 15 m³/h
181	Plain rolling machines	8455	10		up to d = 1000 mm, l = 800 mm, 20 m³/h
182	Construction steel rolling lines	8455	21	00	Of an output of up to 30,000 tons/year
183	Corrugated iron sheet rolling machines	8455	22	00	Of an output of 15-20HP, a weight of 8-12 tons, and dimensions of 10 x 1.5m, rolling speed of 3-5 m/minute, thickness of tole is 0.34-0.6 mm
184	C and Z-shaped binding rafter rolling machines	8455	22	00	Of an output of 30 HP, a weight of 8.5 tons, and dimensions of 8 x 8 m, rolling speed of 12-15 m/minute, thickness of tole is 1.5-3 mm
185	Construction steel rolling lines	8455	21	00	Of an output of up to 30,000 tons/year
186	Common-type multi-purpose lathes	8458	99	90	Diameter of up to 650 mm, 3,000 mm length
187	Rod drilling machines	8459	29		Of a diameter of up to 40 mm, itinerary is 400 mm length
188	Table drilling machines	8459	29		Diameter of up to 13 mm
189	Two-stone grinding machines	8460	90		Diameter of up to 400 mm
190	Common transverse planer	8461	20		Itinerary of 650 mm
191	Rod sawing machines	8461	50
192	Pneumatic hammers	8462	10		up to 75 kg
193	Electronic calculators	8470	10	0	Capable of operation without an external source of electric power and pocket-size data recording, reproducing and displaying machines with calculating functions
194	Cash registers	8470	50	0
195	Laptop	8471	30	20
196	Personal computers (exclusive of portable computers)	8471	41	10
197	Intergrated system controlling protection and automated substation 110kv, 220kv, 500kv	8471	49		Including control board, protection,measurement for substation to 500kv, software collecting data, application processing, data saving and interface for user
198	System collecting and processing data SCADA for dispatch centres of electrical system	8471	49		Including data- collecting board , communication board, original board; software collecting data, application processing, data saving and interface for user: Smart Modem used in wireless net (2G,3G,CDMA, etc)
199	Management information system operated electrical grid and power plants	8471	49		Including data- collecting board , communication board, source board; software collecting data, application processing, data saving and interface for user: Smart Modem used in wireless net (2G,3G,CDMA, etc)
200	Management information system measuring for electricity operation and business	8471	49		Including data-colecting board, communication board, source board: software collecting data, application processing, data saving and interface for user: Smart Modem used in wireless net (2G,3G,CDMA, etc)
201	Host	8471	49	90	Servicing fundamental functions for connection system under 100 workstations
202	Optical disk drives	8471	70	40	Including CD-ROM drives, DVD drives and recordable CD drives (CD-R)
203	Bar code readers	8471	90	10
204	Document or image scanners	8471	90	20
20b	Sand separators	8474	10		Of an output of 25-50 m³/h
206	Stone-grinding and -screening stations	8474	20		Of an output of 200 T/h
207	Ball mills	8474	20		Of a capacity of up to 6 tons/h, number of rounds n = 29.2 rounds/minute Up to 8 tons/h, n = 23.9 rounds/minute Up to 14 tons/h, n = 21.4 rounds/minute; (Input materials: 0-0.25 mm, output products: 0-0.074 mm)
208	Super-fine ball mills	8474	20		For crushing calcium carbonate, of a capacity of up to 2.5 tons/h, a fineness of d50 to2 mm, d97 to 10 mm
209	Jaw mills 400 x 600	8474	20		up to 10 m³/h
210	Circle mills 400 x 600	8474	20		Up to d = 2800 mm, 40 kW
211	Vertical mills	8474	20	19	In main engine of rotary furnace
212	Concrete-mixing machines of free-drop type	8474	31		Up to 250 litres/batch, 5.2 kW
213	Concrete-mixing machines of coercive type	8474	31		Up to 500 litres/batch - 10 kW
214	Hot-asphalt concrete-mixing stations	8474	32		Of a capacity of up to 60-120 m³/h
215	commercial concrete-mixing stations	8474	31	10	Of a capacity of 20-120m³/h
216	roll-compact concrete-mixing stations	8474	31	10	Of a capacity of 100-180m3/h, number of aggregate component 4-6, weigh aggregate: 5000-10000kg, weight cement: 1000-2000kg, weight water: 500 -1000 litres
217	Cool concrete stations	8474	31	10	Of a capacity of 120-180m3/h
218	Degerate - combined mixers	8474	39	10	Up to 12 m³/h - 130 kW
219	- Biaxial Mixers with screen filters	8474	39	10	Up to 20 m³/h - 40 kW
220	Equipment for manufacturing centrifugal water pipes and reinforced concrete poles	8474	80	10	Up to 300 -1500 mm: 75 kW; 110-220kV
221	Brick – mold products
	- Ceramic and granite brick first mold	8474	90	10	Size from 20 to 60 cm, number of compression cycle from 280,000 to 300,000 products/set
	- Ceramic and granite brick mechanical mold	8474	90	10	Size from 20 to 60 cm, number of compression cycle from 280,000 to 300,000 products/set
	- Ceramic and granite brick liner	8474	90	10	Size from 20 to 60 cm, number of compression cycle from 280,000 to 300,000 products/set
222	PEHD pipe production lines	8477	20	20	Producing PEHD, LD, PVC, PTE pipes, of a diameter of f400, f630
223	Vulcanizers for shaping rubber belts	8477	40	10	Of C-class width, a length of up to 14 m, 15 belts per batch, moulding temperature of 150° C, hydraulic diameter of 360 mm, mould size of 20 x 36 inches, pressure of 150 kg/cm2, semi-automatic type
224	Equipment for feeding and -heat-drying materials for plastic presses	8477	90	39	Material feeder: Power source 220 V, single phase; 50Hz; dimensions 540 x 410 x 360 mm, funnel capacity 6 litres, weight 11 kg, feeding capacity 300 kg/h. Power source 380 V, two phases, 50 HZ
225	Rubber latex processing lines	8479			Of a capacity of up to 6 tons/h
226	NPK fertilizer production lines	8479			Of a capacity of 30,000 tons/year
227	Micro-biological fertilizer lines	8479			Of a capacity of up to 20 tons/h
228	Automatic machines for ceiling fan wire coiling	8479	81		Of a coiling speed of up to 2,000 rounds/minute, motor power of 2 x 0.5 HP, three phases, 220/380V, number of coiling grooves 12-30, micro-control type
229	Rotary grates of cement shaft furnaces	8479	89
230	Machines for aluminum ion concentration stabilization	8479	89	30	Capacity of 1.5kW, Voltage: 380V
231	Machines for ED paint degreasing	8479	89	30	Capacity of 6.5kW, Voltage: 380V
212	Machines for ED paint recovering	8479	89	30	Capacity of 5kW, Voltage: 380V
233	Industrial Robots	8479	50	00
234	Steel molds	8480	10	00
235	Molds, machines for automobile component squeezer	8480	49	00	Width 82cm, length 1600cm
236	Showers	8481	80	99	Used for baffle separator in kitchen: Q030JGEV, Q030JGV, Q030JGEVQ01
237	Copper cocks	8481	30	20
238	Upturn- leaft - nonreturn valves	8481	30	20	maximum working pressure 16kg/cm2. maximum working temperature 120⁰ C
239	Spring - nonreturn valves	8481	30	20	maximum working pressure 16kg/cm2. maximum working temperature 120⁰ C
240	Copper gabion	8481	30	20	maximum working pressure 16kg/cm2. maximum working temperature 120⁰ C
241	Garden tap	8481	80	59	maximum working pressure 16kg/cm2. maximum working temperature 120⁰ C
242	Closed gate valves	8481	80	61	maximum working pressure 16kg/cm2. maximum working temperature 120⁰ C
243	copper ball valves	8481	80	63	Maximum working pressure 16kg/cm2. maximum working temperature 120⁰ C
244	Copper combined ball valves	8481	80	63	Maximum working pressure 16kg/cm2. maximum working temperature 120⁰ C
245	Copper corner valves	8481	80	63	Maximum working pressure 16kg/cm2. maximum working temperature 120⁰ C
246	Copper - combined -corner valves	8481	80	63	Maximum working pressure 16kg/cm2. maximum working temperature 120⁰ C
247	Nonreturn valves, lingking-pipe- pumping machine and auxiliary equipment of water supply system cooling for equipment of gas furnace	8481	80	99
248	Ball bearing of 24k and 30K type	8482	80	00
249	Hydraulic gearbox clusters	8483	40	20	Fitted with diesel motor of up to 15 CV
250	Single-phase AC motors (not watertight)	8501	10		Of an output of up to 2.2 kW, asynchronous capacitor motor, short-circuit rotor
251	Three-phase AC motors (not watertight)	8501	20		Of an output of between 0.55 kW and 90 kW, asynchronous motor, short-circuit rotor of between 750 rounds/minute and 3,000 rounds/minute
251	Three-phase AC motors (not watertight)	8501	53	00	Of an output of between 90 kW and 1000 kW, asynchronous motor, short-circuit rotor of 600 rounds/minute
252	Generators (ashore)	8501	61		Of an output not exceeding 75 kVA
253	Kit voltage transformers	8504	21		Of a voltage of up to 35 kV, capacity up to 4000KVA
254	Ballasts for fluorescent tubes	8504	10	00	220V - 50 Hz Of an output of between 20W and 40W
255	Dry voltage transformers	8504	21	99	up to 40.5 KV, capacity up to 10 MVA
256	Transformers	8504	21	99	Distribution and medium-voltage MBA, voltage of less than 66 kV, power of 10-650KVA
		8504	22	99	MBA trung áp và phân phối, điện áp <66kV, công suất từ 660-100.000 KVA Distribution and medium-voltage MBA, voltage of less than 66 kV, power of between 660 and 100,000 KVA
		8504	23	21	MBA 110KV, 8-25 MVA
		8504	23	21	MBA 220 KV, 250-330 MVA
		8504	23	21	One-phase voltage transformers, three-phase voltage transformers with nominal voltage of 500KV (max 550KV), power of up to 900MVA
		8504	23	29	MBA 110 KV, 25-130 MVA
		8504	23	29	voltage transformers with nominal voltage of 110kV (max 121KV),power of up to 120MVA
		8504	23	29	MBA 220 KV, 125 MVA
		8504	23	29	Máy biến áp 1 pha, 3 pha có điện áp định mức 220kV (max 230 KV), công suất 1 pha đến 200 MVA, 3 pha đến 600 MVA One-phase voltage transformers, three-phase voltage transformers with nominal voltage of 220KV (max 230KV), power of one phase up to 200 MVA, power of three phases up to 300 MVA
257	Distribution voltage transformers	8504	22		Three phases, capacity of up to 1000KVA
258	Intermediate voltage transformers	8504	22		Three phases, capacity of up to 10,000KVA
259	Transmit voltage transformer	8504	23	29	A voltage of up to 500 Kv,capacity of up to 450MVA
260	Voltage transformer	8504	31	13	A voltage of between 6 and 35 Kv, current transformation ratio 10-800/5A
261	Single-phase voltage transformer (ashore)	8504	31	13	A voltage of up to 38.5kV, induction type: capacity of 10-150 VA; exact levels 0.2; 0.5; 1; 3; 3P
262	Three-phase voltage transformer (ashore)	8504	31	13	A voltage of up to 38.5kV, induction type: capacity of 10-120 VA; exact levels 0.2; 0.5; 1; 3; 3P
263	Insulator - pedestal - current transformer	8504	31	21	110-220 kv
263	Insulator - pedestal - current transformer	8504	31	22	A voltage of up to 550kV, capacity of 10-50 VA; exact levels 0.2; 0.5; 1; 5P
264	Low-voltage and medium-voltage – measurement - current - transformer	8504	31		low-voltage 380V and medium voltage 35kV, primary of up to 2000A; secondary of 1A and 5A
264		8504	31		low-voltage 380V and medium voltage 35kV, primary of up to 2000A; secondary of 1A and 5A
265	Low-voltage –measurement transformer	8504	32		Voltage level of up to 38.5 kV; power of 10-150 VA, exact level: 0.2; 0.5; 1.3P
266	Low-voltage – transformer	8504	33	91	power of up to 220 KVA
267	Hight -voltage – transformer	8504	33	91	power of up to 500 KVA
268	DC source supply set used for module capacity VHF/UHF	8504	40	19
269	48V - DC source system	8504	40	30	VITECO-ARGUS (10A-600A)
270	Source system	8504	40	90	HRS 4500; SDPS 250
271	Independent source equipment	8504	40	90	DPS 4825; DPS 4850
272	DC source equipment	8504	40	90	HI-CR-1600
273	Tube plate acid lead battery	8507			- Special-used for forklift trucks operated by electricity: capacity of between 2V-100 Ah and 2V-1000 Ah; - Special-used for mining-tram-cars; capacity of between 2V-330 Ah and 2V-650 Ah; - Special-used for railway engines; capacity of between 12V-160Ah and 12V-420Ah; - Special-used for trams in golf yards, railway stations, ports; capacity of 6V-225Ah, 8V-195Ah; 12V-130Ah
274	Combined - coconut fiber - stripping machine	8509	40	00	Capacity of 12 tons/day
275	Presses used for bale of coconut fiber, cocopeat	8509	40	00	Used in stage of pressing bale of coconut fiber, cocopeat, capacity of 4-12 tons/day
276	Manufacturing lines of flour- or – pellet - form breeding food	8509	40	00	Capacity of up to 15 T/h controlled by quantitative, mixed automatic by computer
277	Headlights for car	8512	20	10
277	Headlights for car	8512	20	99
278	Headlights for 1- ton – capacity - under - truck	8512	20	99
279	Wipers for automobile	8512	90	20
280	Horn for automobile	8512	30	10
281	Miner’s torches	8513	10	10	DM 10 A
282	Miner’s torch-charging stands	8513	90	90	GN 16 - 32 - 48
283	Granulating fluidized bed dryers	8514			Capacity of 40-100kg/h; Volume of drying pit is 400l; thermal output of 45 kW, drying temperature of 70-80⁰C (used in medicine)
284	Subscriber card of electronic switchboard	8517			Used in postal service
285	Line telephone sets with cordless handsets	8517	11	0
286	mobile phones or phones used for cordless-network	8517	12	00
287	Public telephones	8517	18	00	V-820 type
288	VSAT switchboards	8517	61	00	DTS VSAT type
289	Internal switchboards under 1000 number	8517	62	30
290	Access switchboard systems	8517	69	90	DTS-4000-AN
291	Devices to prevent illegal line connection	8517	69	00	P-hne type
292	Wire connection boxes	8517	70		HC, HD, HDTM 50, HPDR, jack batche
293	connection boxes	8517	70		HCN 30, HCN 50
294	Subscriber security boxes	8517	70		DS391, GDT
295	Subscriber wire connection boxes	8517	70		DD
296	Telephonic cable connection cabinets	8517	70		Of iron and composite (KP 300, TS, KP 300 PCS, KP-600-PCS, KP-1600, KP-600, KP-1200)
297	Subscriber security boxes	8517	70		DS301: GDT
298	Cable sleeves	8517	70		PMS 1-3; PMS 4-6
299	Optic fiber cable sleeves	8517	70		PMO-12/72 FO
300	Post office boxes	8517	70
301	Manual direction finder (MDF) connection devices	8517	70		From 500 to 5,000 pairs
302	Data-link control (DLC) subscriber circuit devices	8517	70
303	Optic-fiber cable terminal equipment	8517	70		STM-1, STM-4, STM-16
304	Modems V-ADSL	8517	70	10	For common telephones
305	Devices for SA-6PE16 sonic generating	8517	70	99
306	MDF 5-point – security devices	8517	70	99	MDF S2000-PTC
307	MDF-connecting stands of P6000 type	8517	70	99	MDF P600
308	GANIVO covers of communication cable hole	8517	70	99
309	Wire connection slates	8517	70	99	One pair with grease (BI-1), 10 pairs with grease (BI-10), wire SL10, wire PO-10 (IDC102), subscriber wire (PO-IDF and PO-ID)
310	REF cable connectors	8517	70	99	UY2; UY-POSTEF
311	Optic transmission PDH Optimux (4E1)	8517	70	99
312	Appliances for subscriber line checking	8517	70	99	POSTEF DK-2000
313	Micro	8518	10	11	frequency band of between 300 Hz and 3,400 Hz, with diameter not exceeding 10 mm and heigh not exceeding 3 mm, used in telecommunication
314	Single loudspeakers, mounted in their enclosures	8518	21
315	Sets of loudspeakers, mounted in a same enclosure	8518	22
316	Box assembly speakers	8518	29	10
317	Loudspeakers, without housing	8518	29	20	having a frequency range of 300 Hz to 3.4 kHz with a diameter of not exceeding 50 mm, for telecommunication use
318	Loudspeakers for automobile	8518	29	90
319	Headphones and earphones, combined with a microphone	8518	30	10
320	Headphones and earphones, not combined with a microphone	8518	30	20
321	Audio-frequency electric amplifiers	8518	40
322	Electric sound amplifier sets	8518	50
323	Parts of equipment	8518	90	10
323	Parts of equipment	8518	90	20
324	Combined microphone / speaker sets :
	- Handheld transceiver used for equipment of telephone	8518	30	31
	- Handheld line telephone	8518	30	40
325	Sound amplifiers of sirens	8518	50	00
326	Magnetized cards	8523	21		Entry/exit control cards
327	Discs for laser reading systems:	8523	49
328	Smart cards	8523	52	00
329	Transmitting equipment for the analogue television broadcasting service	8525	50	00	UHF semi-conducting video transmitters of a power of between 100w and 10 kw; VHF of a power of between 150w and 1 kw - combined configuration; UHF of a power of between 150w and 1 kw -combined configuration; portable transmitters of a power of between 5 and 30w; DVB - T Transmitters of a power of between 10 and 20w
		8525	50	00	Semi-conducting FM Stereo transmitters of a power of between 100w and 10 kw; Portable FM Stereo Transmitters of a power of between 5 and 30 w
		8525	50	00	Digital transmitters incorporating DVB camlink camera; Pocket DVB transmitters
330	Transmission apparatus incorporating reception apparatus	8525	60	00
331	Webcam	8525	80	10
332	Digital cameras and video camera recorders incorporating sound recording	8525	80
333	Video connection control units	8525	10		Wire and wireless type
334	Central control systems	8525	10
335	Remote control systems	8525	10
336	Television decoders and channel selectors	8525	10
337	Digital microwave equipment	8525	20	50	4x2, 8x2, 16x2 Mbit/s
338	Few-channel digital microwave equipment	8525	20	50	Between 1 and 6 channels
339	Digital radio relay systems	8525	20	50
340	Transmitters for radio telephony and telegraphy	8525	20	91	Frequency range VHF/UHF 1GHz-14GHz
341	Microwave transmitters for television broadcasting	8525	20	92	Frequency range VHF/UHF 1GHz-14GHz analog/digital technology
342	Microwave transmitters for radio broadcasting	8525	20	99	Frequency range VHF/UHF 1GHz-14GHz analog/digital technology
343	Digital transmitters	8525	50	00	10w/15w/20w DVB - T Transmitter
344	Ground radars	8526	91	90
345	Radio remote control units	8526	92	00
346	Wireless radio receivers/with micros/with DC 12V	8527	13	90	Digital technology, encoding, remote control with a power of 50w (25w + 25w), amplification in two separate channels, inserting 8 channel decoding card DD-8
347	Cathode ray tube screens:	8528	41
348	Other screens	8528	51
348	Other screens	8528	59
349	Specialized digital signal receivers	8528	71		Prof. DVB Receiver a Frequency range of 470-1000 Mhz/250-1000 Mhz
350	Microwave antenna posts	8529	10		Of a height of up to 150 m
351	Antenna pillars	8529	10		Stay cables of a triangle cross-section of 330, 660, 800, 1200 mm
352	Antennas of all kinds for transmitters	8529	10		For radio and television broadcasting, radio telephony and telegraphy
353	Spare parts and accessories of transmitters	8529	10	40	For radio and television broadcasting: dividers, adders, filters, channel adders
354	Directional DVB broadcasting antenna systems	8529	10	92
355	Non-directional DVB broadcasting antennas	8529	10	92
356	Mobile directional DVB digital receiving antennas	8529	10	92
357	Mobile non-directional DVB digital receiving antennas	8529	10	92
358	Filters and UHF Band antenna amplifiers	8529	10	92
359	DC source supply and RF connectors	8529	10	92
360	VHF Band-I video broadcasting antenna	8529	10	92	Kind of antennas: 2-dipole, horizontal polarization, fittings N, 700W/fittings 7/16, 1.5kW/fittings EIA 7/8", 2.5kW; materials: stainless steel coated zinc, silver coated copper, teflon
361	VHF Band-Ill video broadcasting antennas	8529	10	92	Kind of antennas: 2-dipole, horizontal polarization, fittings N, 500W/fittings 7/16", 500W; materials: stainless steel coated zinc, silver coated copper, teflon
362	UHF Band-IV/Bank-V video broadcasting antennas	8529	10	92	Kind of antennas: 4-dipole, horizontal polarization, fittings N, 500W/fittings 7/16, 1 kw/fittings EIA 7/8, 2kW; materials: inox, silver coated copper, Teflon, composite covers
363	FM broadcasting antennas	8529	10	92	Dipole/"Skewd-V Dipoles/ directional
364	Power dividers	8529	10	92	FM/UHF/VHF (2,4,6,8 lines)
365	Television receiving antennas	8529	10	92	Specialized channel Yagi VHF Band-III/UHF Band-IV/V
366	FM receiving antennas	8529	10	92	Yagi/dipole
367	Two-antenna diplexers	8529	10	92
368	Antenna filters and amplifiers	8529	10	92	Specialized channel FM/VHF Band-III/UHF Band-IV/V
369	DC source supply and RF connectors	8529	10	92
370	Specialized FM receivers	8529	10	92	Of a frequency range of between 87.3 to 108 MHz
371	Specialized VHF/UHF video receivers	8529	10	92	Of a frequency range of between 46 to 870 MHz
372	Syntonisation adjusters with flange	8529	10	92	1-5/8”, 3-1/8”; 4-1/2” - FM/VHF/UHF
373	Gate converters	8529	90	99	3 doors 7/8"; 4 doors 7/8"; 3 doors 1-5/8"; 4 doors 1-5/8"; 6 doors 1-5/8"; 7 doors 1- 5/8"; 3 doors 3-1/8"; 4 doors 3-1/8"; 7 doors 3-1/8"
374	Remote-control 8-channel encoders	8529	90	52
375	Power amplifiers	8529	90	59	60w/100w/120w/150w DVB Power Amplifter
376	Exciters	8529	90	99	VHF Exciter, UHF Exciter with analogue combined or separated sound and vision, 20w (max)
377	Power module	8529	90	99	VHF of between 150w and 1.6kw; UHF of between 150 and 2.4kw; integrated DC power supply
378	Control units	8529	90	99	LCD 75x25mm and 15”, integrated power supply
379	Two-line RF signal dividers	8529	90	99	SMA – SMA fittings
380	Two-line RF power diplexers	8529	90	99	N-7/16” fittings; 7/16’ -EIA 7/8 fittings; EIA 7/8 - EIA1 - 5/8 fittings, EIA1 - 5/8 - EIA3 - 1/8 fittings;
381	Vision/sound diplexers 5-10 kW	8529	90	99	UHF/VHF Vision/Sound Diplexer with Output Filter
382	VHF Band-Pass Filter/Notch Filter	8529	90	99	500 W fittings N; 1kW, 7/16 fittings; 2 kW, EIA 7/8 fittings
383	UHF Output Filter	8529	90	99	500 W fittings N; 1kW, 7/16 fittings; 2 kW, EIA 7/8" fittings
384	Liquid cooling systems, double pumping configuration	8529	90	99	Auxiliary equipment for video broadcasting machines comprising pump control cabinets, combined heat exchangers, safety control equipment, liquid pipeline systems, tanks and accessories
385	FM Stereo Exciter	8529	90	99	output 20W, analog
386	FM power amplifiers	8529	90	99	50W - 300W;
387	FM power amplifying module	8529	90	99	500W-1KW, integrated DC power supply
388	FM power amplifying module	8529	90	99	1.6kW, integrated DC power supply, cooling by wind, module kind of a plug and unplug
389	DC power supply used in FM power module	8529	90	99
390	Diplexers of channels of two FM broadcasting machines	8529	90	59	2kW + 2kW; 5kW + 5kW; 10kW + 10kW
391	Diplexers of channels of two VHF video broadcasting machines	8529	90	59	2kW + 2kW; 5kW + 5kW; 10kW + 10kW
392	Medium-voltage capacitors	8532	10	00	8.66 – 12.7kv
393	Fuse cut out	8535	10	00	6-35kv, 100 A
394	High-voltage switches	8535	30	90	For a voltage of 6 - 220 kV. Standard current of up tp 2000 A
395	Sub-switches	8535	30	90	22-35 kv; 400-630A
396	Medium-voltage sub-switches	8535	30		For a voltage of upp to 35KV
397	Disconnecting switches	8535	30		For a voltage of upp to 220KV
398	Anti-lightning devices for power lines	8535	40	00
399	Lightning protection equipment	8535	90	90	LPS
400	LAN lightning prevention equipment	8535	90	90	POSTEF PP RJ45/16
401	Anti-lightning devices on [transmission] lines	8535	90	90	POSTEF HSP 10-72V, POSTEF PCX-T43, POSTEF-B180, POSTEF-B480; Used in the postal sector
402	Automatic circuit breakers of all kinds (ashore)	8536	20		U of up to 500V; I of up to 600A
403	Lightning suppressors	8536	30		High intensity on first and second floor
404	Multistage lightning surge filters	8536	30
405	Systems of lightning ground connection	8536	30		From 10 to 40 columns
406	Switches and current-converting switches (ashore)	8536	50		1 up to 3,000A
407	Magnetic starters (ashore)	8536	90	99	U 220V, 380V; I of between 4 A and 450 A
408	Iron or composite conduit boxes	8536	90	29
409	Protection cabinets for telecommunication equipment of all kinds				Cabinet shells coated with electrostatic paint, fitted with telephony equipment or telecommunications equipment inside
410	Low-voltage electric cabinets, Control cabinets	8537	10		Voltage of up to 600V, 75-2500A
411	Electric cabinets (ashore)	8537	10		Cabinet shells coated with electrostatic paint, fitted with electrical equipment
412	Medium-voltage kit switching cabinets	8537	20		Voltage of up to 35KV
413	Medium-voltage electric cabinets	8537	20		Voltage of between 7.2 and 40.5KV, 630-3000 A
414	Grid control and security cabinets, and transformers	8537	20	29	At transformer stations for a voltage of up to 220 kV
414	Grid control and security cabinets, and transformers	8537	20	29	At transformer stations for a voltage of up to 500KV
415	Waterway navigation signal lights BH-998P	8539	90	90
416	Diodes, other than photosensitive or light emitting diodes	8541	10	00
417	Transistors, other than photosensitive transistors	8541	21	00
418	Thyristors, diacs and triacs, other than photosensitive devices.	8541	30	00
419	Photosensitive semiconductor devices, including photovoltaic cells whether or not assembled in modules or made up into panels; light emitting diodes	8541	40
420	Electronic integrated circuits	8542
421	Control cables	8544			250V
422	Electricity wire and cables	8544			AV, ACSR, CV, CVV
423	Dynamic cables and lighting	8544	11	20	0,6/KV, VIMACABLE, electrical cables for vessel of all kinds
424	Other electric conductors, used for voltage not exceeding 1,000V:
	- - Fitted with connectors	8544	42
	- - - Of a kind used for telecommunications, for a voltage not exceeding 80 V:
	- - - - Telephone, telegraph and radio relay cables, submarine	8544	42	11
	- - - - - - Plastic covered electric cables having a cross section not exceeding 300 mm2	8544	42	19
	- - - - - - Telephone, telegraph and radio relay cables	8544	42	19
	- - - Of a kind used for telecommunications, for a voltage exceeding 80 V but not exceeding 1,000 V:	8544	42	20
	- - - - Telephone, telegraph and radio relay cables, submarine	8544	42	20
	- - - - Telephone, telegraph and radio relay cables, excluding submarine kinds	8544	42	20
	- - - - Plastic insulated electric cables having a cross section not exceeding 300 mm2	8544	42	90
	- - - - Plastic covered electric conductors	8544	42	90
	- - - Of a kind used for telecommunications, for a voltage not exceeding 80 V:
	- - - - Telephone, telegraph and radio relay cables, submarine	8544	49	11
	- - - - - Telephone, telegraph and radio relay cables	8544	49	19
	- - - Of a kind used for telecommunications, for a voltage exceeding 80 V but not exceeding 1,000 V:
	- - - - Telephone, telegraph and radio relay cables, submarine	8544	49	31
	- - - - - Telephone, telegraph and radio relay cables	8544	49	39
425	Information and telephone cable – 250V	8544	49
426	Fibre-optic cables	8544	70	10	Telephone, telegraph and radio relay cables, submarine
427	Electrically insulated porcelain	8546	20		Of ceramics, for a voltage of up to 35 kV
428	Railway passenger coaches	8605	00	00	Various kinds (hard seats, soft seats; hard berths, soft berths; double-deck coaches; B coaches), high-class coaches of the second generation and a length of 20 meters
429	Dining coaches, public-duty and generator coaches, luggage coaches	8605	00	00
430	Composite tank wagons for the transport of fluids	8606	10	00	Of up to 30 m3
431	H coaches	8606	10	00	Of a length of 14 m, fitted with bogies 34B, Mison TQ
432	Over-size H coaches 1435	8606	10	00	Of a length of 14 m and a load of 60 tons
433	Covered cargo coaches	8606	91	00	Of a length of 14 m, fitted with modified bogies 34 B
434	M container coaches	8606	99	00	Of a length of 14 m, fitted with bogies 34B, Mison TQ
435	3-GCH M container coaches	8606	99	00	Of a length of 16 m, fitted with three modified bogies 34 B
436	(N) low-wall coaches	8606	99	00	Of a length of 14 m, fitted with modified bogies 34 B
437	Passenger coach bogies of all kinds	8607	12	00	Indian-type with steel springs, air-spring type
438	Passenger cargo bogies of all kinds	8607	12	00	Of welded steel type
439	Small tractors, four-wheel tractors with ploughs, harrows behind	8701			Of between 8 CV and 20 CV
440	Handheld tractors	8701	10	11	Of capacity not exceeding 22.5KW
441	tractors	8701	20	10	Of volume under 1,100 cc
442	Passenger cars	8702	10		Of common type, with between 10 and 50 seats
443	Buses	8702	10	10	Of common type, up to 80 seats
444	Small cars	8703			Of up to 9 seats
445	Dump trucks	8704	10		Of coach V 6.6m3, load of up to 13 tons, quality standard EURO2
445	Dump trucks	8704	10		capacity of up to 23m3; load of up to 33.2 tons, quality standard EURO2
446	Light trucks	8704	21		Of a gross tonnage not more than 5 tons
447	Mobile repair cars	8704	21	25
448	Tank cars	8704	22	39	Of a capacity of up to 16.5 tons, quality standard EURO2
449	Garbage trucks of all kinds	8704	23	22	5-20m3, made of abrasion-proof and high-pressure – bearing alloy stell material, operate pressing by hydraulic system, automatic mechanical control system
450	Dump tippers	8704	23	29	Of a load of up to 15 tons
451	Trucks with lifting appliances	8704	23	29	Of a load of up to 2 tons
452	Automobiles with closed cabinets	8704	23	29
453	Light trucks	8704	90	99	Of a maximum load of up to 12 tons
454	Water tank cars	8704	22	43	Of a volume of 16 m³, load of 16 tons, weight of 32 tons, quality standard EURO2
455	Tank cars for fuel	8704	22	43	Of a volume of 12.5 m³, load of 10.25 tons, quality standard EURO2
456	Crane trucks and lift trucks for people work onhigh	8705	10	00	Capable of lifting up to 14 m
457	Crane trucks	8705	10	00	Of lifting load of up to 22.5 tons: quality standard EURO2
458	Fire trucks	8705	30	00	Water tank (4-6 m3), foam tank (0.5 – 1 m3 foam)
459	Street cleaning and park watering vehicles	8705	90	50	Of a capacity of 4.5 - 14 m³ of water
460	Tailings absorbing trucks	8705	90	90	1.5-8 m3
461	Mobile television stations	8705	90	90
462	Mobile stages	8705	90	90	Of a floor area of between 40 and 65 m²
463	Double-deck trucks for carrying motorbike	8705	90	90	Of a load of up to 10 motorbikes
464	Tank cars for liquids (chemicals)	8705	90	90	Of a capacity of up to 12 m3
465	Tank cars for oil and gas	8705	90	90
466	Hooklift trucks	8705	90	90
467	Vehicles maintaining freezing temperatures [of their cargo]	8705	90	90	Of a volume of up to 20m³, the temperature of up to -20°C
468	Vehicle- rescue vehicles	8705	90	90	Of a load of up to 5 tons
469	Vehicles transporting rare and precious goods	8705	90	90	Three layers, fire prevention, alarming system
470	sheaths and bodies not welded CKD (of small car)	8708	29	93
471	UAZ vehicle bodies	8708	29	99
472	Gearbox	8708	40		HS14, HS19, GT10, GT2, HDC
473	Parts of truck of kinds under 6 tons:
	- welded cabins	8707	90	90	Pressing technology, welding technology
	- CKD cabins	8708	29	99
	- Chassis	8708	99	90
474	Parts of truck:				of kinds of between 10 tons and 20 tons
	- welded cabins	8707	90	90
	- CKD cabins	8708	29	99
	- Chassis	8708	99	90
475	Motorcycles	8711	10		Of a cylinder capacity of up to 50 cc
475	Motorcycles	8711	20		Of a cylinder capacity of between 50 and 250 cc
476	Two-whell bicycles and other pedal-powered cycles	8712			Including three-wheel cargo pedicabs
		8712	00	20
		8712	00	30
		8712	00	90
477	exhaust pipes of motorcycles	8714	10	90
478	Grip handle at back of motorcycle	8714	10	90
479	Lock of saddles	8714	10	90
480	Before and back dampings for motorcycle	8714	10	90
481	Components of clutch assembly	8714	93	10
482	Gears	8714	93	90
483	Passenger ships	8901	10		Of common type, with up to 300 seats
484	Barges	8901	20	70	Of a whole length of 122.4 m, length between two piles is 119.7m, a design width of 44 m, a boong height of 7.5 m, design draft of 5m, sinking darft of 13m, crewmen of 8 persons, drilling rig load P (9500); and 18000DWT
485	AHTS ships (multi-function petroleum service ship)	8901			Capacity of 16,000HP
486	Self-operating ferries	8901	10		All kinds
487	Bulk cargo ships	8901	10	60	Of a whole length of 190 m, length between two piles is 183.3m, a design width of 32.26 m, a boong height of 17.8 m, design draft of 11.7m, full-loading darft of 12.8m, load type of 54000DWT
488	Oil ships	8901	20		Of a tonnage of up to 20,000 tons
489	Oil ships	8901	30	80	Of a whole length of (Lmax = 245m), length between two piles of (Lpb=236m), a design width of (Btk=43m), a boong height of (Dtk=20m), design draft of 11.7m, full-loading darft of 14m, crewmen of 12 persons, exploiting speed v = 15 nautical miles/h; Aframax load type of 104,000 DWT and 105,000 DWT
490	Liquefied gas ships	8901	20		Of a tonnage of up to 5,000 tons
491	Cargo ships	8901	90		Of a tonnage of up to 53,000 DWT
492	River-coastal self-propelled ships	8901	90		Of a tonnage of between 200 to 1100 tons
493	Special-purpose barges fitted with cranes of all kinds	8901	90		Of a lifting capacity of up to 4,200 tons
494	Sea barges	8901	90		all kinds
495	River barges	8901	90		all kinds
496	River tug barges	8901	90		Of a tonnage of 200-600 tons
497	Special-use barges for petroleum industry	8901	90		Of a length of 109.8 m, a width of 32 m, a height of 7 m and a tonnage of 12,000 tons
498	Container sea liners	8901	90		Of a tonnage of up to 2000 TEU
499	All kinds of fishing vessels of wood shells	8902			Of an output of up to 600 CV
500	All kinds of fishing vessels of iron shells	8902			Of an output of up to 1980 CV
501	Composite shell fishing vessels	8902			12m long, 4.8m wide, 3m high; floating line of 1.35m; power of 150 HP; fish-hold capacity of 18m3
502	Fishing service vessels	8902			Of an output of up to 2,000 CV
503	Fishery control vessels	8902			Of an output of up to 600 CV
504	Stell – shell - armed - fisshing vessels	8902
505	Sea tug vessels	8904			Of an output of up to 7,000 CV
506	River tug-push vessels	8904			Of an output of up to 5,000 CV
507	Post tug vessels	8904			Of an output of up to 5,600 CV
508	tug vessels	8904	00	19	Of a whole length of 30.96m, length between two piles of 27.12 m, width of 9.85m, a boong height of 4.2 m, soaking heigh of 3.2m, crewmen of 10 persons, free speed of 10 nautical miles/h; machine capacity of 2x1200hp/1800rpm; 1200x2CV
509	self-propelled dredgers	8905	10	00	of up to 5000 m3/h
510	Non-self-propelled dredgers	8905	10	00	of up to 5000 m3/h; capacity of up to 4,170 CV
511	River and sea dredgers	8905	10	00	With a dredging depth of 10-20 m, an output of up to 3,000 CV
512	Drilling rigs for oil well exploitation	8905	20	00	Bunga Orkid technology B, C, D
513	Self-lifting drilling rigs	8905	20	00	Being type of mobile drilling rigs enable to explore, exploit at water areas with depth of 90 m, lifting up and down of body of drilling rigs is performed by system of lifting up-down and keeping fixed tripod. Satisfying standard ISO 9001-2008 by Lloyd’s Register Quality Assurance Number VTU 6006599
514	Floating dock	8905	90	10	A lifting capacity of up to 20,000 tons
515	Buoy-laying vessels	8906	90		Of an output of up to 3,000 CV
516	Special-purpose high-speed ships	8906	90	90	Of a speed of up to 32 nautical miles/h, an output of up to 3,200 CV
517	high-speed canoes	8906	90	90	Of a length of 4.2m; of a width of 1.71 m, of a height of 0.55m; water-line of 0.25m; of a power of 25-60 HP; of a capacity of between 4 and 6 people
518	Life-boats with closed sides	8906	90	90	Of a length of 4.9m; of a width of 2.2m, of a height of 1 m; water-line of 0.8m; of a capacity of 28 people; of a power of 29 HP
519	Marine research ships	8906	90	90	Of an output of up to 5,000 CV
520	Special-purpose ships	8906	90	90	Salvage and rescue ship of 3.500CV, ship servicing for oil spill incident response of up to 3.500CV, ship servicing for petroleum service of up to 6082CV
521	Buoy-laying machines of all kinds	8907			Of a lifting capacity of up to 5 tons
522	Optical fibres, optical fibre bundles and cables	9001	10	10	Used for telecommunications and other electrical sectors
523	Sets of digital cameras support	9006	91	90
524	Scada system for automatic and concentrated methane surveying	9015			Software of automatic and concentrated methane surveying: Vietnamese interface, allowing update of field map, directions and warnings at positions on map. The central suppervision cabinet: being able to manage from 16 measuring heads or more. Methane measuring head: measuring range of 0-5% CH4; error: ±0,10; when CH4 concentration (0÷2%), ±0,2% when CH4 concentration (2÷5%). CO measuring head: measuring range: 0 -200ppm CO; error: ±5ppm when CO concentration (0÷200ppm).
525	Electronic scales	9016	00	00	C-300, C30K, C-6000, C-150KP, C-60KP used for postal service
526	Automatic electronic scales	9016	00	00	Of up to 120 tons
527	Electronic scales for automobile (tonnage of 30T, 50T, 60T, 80T, 100T)	9016	00	00	Limit of scale: 30-1000 tons, size of scale bench: 3x(12-18)mm, degree of accuracy: III, number of measuring heads: 4-8, module number of scale bench: 1-3, scale bench (material): concrete/steel, overload ability of 125%
528	Electronic scales for train (tonnage of 100T, 120T)	9016	00	00	Used for rail types of 1000mm or 1435mm, supplier of electronic equipment and measuring head: G7, EU, size of scale bench: 3.8mx1.5m, degree of accuracy: 1, error < 1%, under OIML-R106 national standard, max scaling of 120 tons, number of measuring head: 4 pcs, overload ability: 125%
529	Ultraviolet lamps	9018	20	00
530	Sterilized plastic syringes of all sizes	9018	31	90
531	Auto locked syringes	9018	31	90
532	Intravenous fluid transmission sets	9018	39	90
533	Blood transfusion sets	9018	39	90
534	Enema bulb syringes	9018	39	90
535	Oxygen tubes	9018	39	90
536	Feeding tubes	9018	39	90
537	Fluid transmission tubes of the butterfly shape	9018	39	90
538	Urine bags	9018	39	90
539	Electro acupuncture machines	9018	90	90	DC 6v - 2f-c
540	DINHMAN gags	9018	90	90
541	Solution containers	9018	90	90
542	Hand-held measuring glasses	9018	90	90
543	Screwing tool to straighten bent bone	9018	90	90
544	Uterine manipulators	9018	90	90
545	High frequency electric bistoury	9018	90	90
546	Bistoury adjoined to handles No. 12	9018	90	90
547	Distilled water makers	9018	90	90
548	C02 surgical laser machines of all kinds	9018	90	90
549	Therapeutic He-ne laser machines	9018	90	90
550	Pulse electric machines	9018	90	90
551	Blood pipette shaking machines	9018	90	90
552	12-traditional recipe simmering machines	9018	90	90
553	Plates for feeding microbe	9018	90	90
554	Sterilized wooden tongue depressors	9018	90	90
555	Catheter to extract body fluid	9018	90	90
556	Belly button clips for new born babies	9018	90	90
557	Surgical scissors of all kinds	9018	90	90
558	Maier cotton gauze straight-tip forceps	9018	90	90
559	Bonzemam sterilized forceps with curved tip and bottom	9018	90	90
560	Kidney dish	9018	90	90
561	Seminal duct forceps	9018	90	90
562	Blood forceps of all kinds	9018	90	90
563	Uterus forceps of all kinds	9018	90	90
564	Hegar surgical needle forceps of all kinds	9018	90	90
565	Semen separating forceps	9018	90	90
566	Foerster cotton gauze forceps	9018	90	90
567	Babacop fallopian tube forceps	9018	90	90
568	Disposable acupuncture needles	9018	90	90
569	Vaginal speculum clamps of all sizes	9018	90	90
570	Steam autoclaves	9018	90	90
571	Instrument sterilized boiling type	9018	90	90
572	Dilatation of cervix of all sizes	9018	90	90
573	Machines for treatment of benign prostatic hyperplasia by using ultrasonic waves	9018	90	90
574	Waste water buckets with lids	9018	90	90
575	Karman pumping catheters	9018	90	90
576	Medical feeding tube	9018	90	90
577	Placenta curette of all kinds	9018	90	90
578	Outside irradiated He-Ne laser therapy machine	9018	90	90
579	Outside irradiated infrared laser therapy machine	9018	90	90
580	Devices destroying injection needles	9018	90	90
581	Splints for orthopaedic fracture	9021	10	00
582	Combined electric meters and registers	9028			For metering electric motors of an output of under 50W, voltage and consuming power
583	One-phase and three-phase electric meters	9028	30	10	U of up to 380V, I of up to 100A
584	One-phase and three-phase electronic meters	9028	30	10
585	Single-phase electronic meters	9028	30	10	degree of accuracy 1.0: normalized voltage (Un): 220 VAC, rated current (Ib):5A, 10A, 20A, 30A, 50A: maximum current (Imax): 20A, 40A, 60A, 80A, 100A, starting current (Ist)< 0.4%Ib; working frequency: 50Hz; meter constant: 1600 impulse/kwh
586	Single-phase electronic meters, integrated the remote index recording - reading system by RF radio wave	9028	30	10	degree of accuracy 1.0: normalized voltage (Un): 220 VAC, rated current (Ib):5A, 10A, 20A, 30A, 50A: maximum current (Imax): 20A, 40A, 60A, 80A, 100A, starting current (Ist)< 0.4%Ib; working frequency: 50Hz; meter constant: 800/1600 impulse/kwh
587	Composite protection boxes of electricity meters	9028	90	90
588	Composite boxes of electricity meters	9028	90	90
589	Measuring apparatus and auxiliary apparatus for steam boiler of electrothermal plants	9030	33	90
590	Testing apparatus for meter	9031	80	90	12 – position single phase; 40 – position single phase
591	Alarm-clocks	9105	11	00
592	Wall clocks	9105	21	00	Electrically operated
593	Card-accepting gate entry and exit control devices	9106	10	00
594	Rubber sticks	9304	00	90
595	Electric sticks of all kinds	9304	00	90
596	Pepper spray	9304	00	90	type of 500 ml, 2000 ml
597	Sterilized hand washing sets	9402	90	90
598	Inox-made patient stretchers of all kinds	9402	90	90
599	Inox-made examining tables of all kinds	9402	90	90
600	Surgical tool tables	9402	90	90
601	Parturition table of all kinds	9402	90	90
602	Injection tables	9402	90	90
603	Inox-made tables for changing bandages	9402	90	90
604	Wheeled patient stretchers of all kinds	9402	90	90
605	Folded stretchers of all kinds	9402	90	90
606	Patient beds of all kinds	9402	90	90
607	Newborn baby beds	9402	90	90
608	Patient beds with bed-planks made of inox	9402	90	90
609	Emergency beds with two cranks and three positions	9402	90	90
610	Electric emergency beds	9402	90	90
611	Multi-functional beds	9402	90	90
612	Swivel chairs for health examination	9402	90	90
613	Infusion stands made of inox	9402	90	90
614	Sterilized stands	9402	90	90
615	Medical tool steamers	9402	90	90
616	Medical trays with lids	9402	90	90
617	Medical tool steamers	9402	90	90
618	Medical trays with lids	9402	90	90
619	Medical cabinets with no poison drawer	9402	90	90
620	Patient stretcher trolleys	9402	90	90
621	Inox oxygen trailers	9402	90	90
622	Inox injection needle trolleys	9402	90	90
623	Inox housecleaning trolleys	9402	90	90
624	Patient's clothing carriers	9402	90	90
625	Tool trolleys	9402	90	90
626	Medicine cabinets having a poison drawer	9402	90	90
627	Four drawer tool cabinets	9402	90	90
628	Inox beg-head cupboards without barrier	9402	90	90
629	Warming cabinets	9402	90	90
630	Drying Cabinets	9402	90	90
631	Poison absorbing cabinets	9402	90	90
632	Sterilization drying Cabinets	9402	90	90
633	Arm and leg splinters (INOX)	9402	90	90
634	Manual rolling kits	9402	90	90
635	Specialized traces-collecting kits DV-03	9402	90	90
636	Flashlights	9405	40	99	Type of DL-DT05 flashlights
637	Dead zone detectors	9405	60	90
638	Warning signs made of fluorescent reflection aluminium	9405	60	90	For autos, motors, traffic signs

ANNEX II

LIST OF CONSTRUCTION SUPPLIES IN THE CATEGORY OF ABLE TO BE PRODUCED DOMESTICALLY
(Issued with Circular 04/2012/TT-BKHDT of August 13, 2012, of the Ministry of Planning and Investment)

Construction supplies which can be produced in domestic, include supplies used in process of construction of workshops, construction works being fixed into works in process of works construction and perfection as listed at below:

No.	Name of goods	Code in the import tariff list			Symbols of specifications, description of technical features
No.	Name of goods	Heading	Sub-heading
1	Sand	2505			Black sand and yellow sand
2	Standard sand	2505	10	00	Used for cement quality test
3	Quartz	2506	10	00	In the form of white powder
4	Kaolin	2507	00	00	Al₂O₃: 21 - 37%
5	Clays, silty clays	2508
6	Diatomite	2512	00	00	In powder form
7	Marble blocks, slates	2515
8	Granite blocks, slates	2516
9	Construction stone and gravel	2517	10	00
10	Dotomite	2518			In the form of gray or white powder
11	Limestone and limestone powder	2521	00	00
12	Lime	2522
13	White Portland cement	2523	21	00	PCw
14	Portland cement	2523	29	10	PCB30, PCB40, PC30, PC40, PC50
15	Pozolanic cement	2523	29	90	PCpuz
16	Low-heat cement	2523	29	90	PCit
17	Sulfate-resisting cement	2523	30	00	PCs, PChs
18	OWC cement	2523	90	00	OWC cement used for pumping and cementing well at the temperature of 100^oC, depth of -2.600, density of 1.72 g/cm3 ÷ 1.8 g/cm3, pressure of 0.0135 Mpa/m ÷ 0.0165 Mpa/m
19	Mica	2525	20	00	In white-clear flakes, of a size of between 16 mesh and 100 mesh
20	Feldspar	2529	10	00	In white or light-yellow powder or granules
21	Fluoride	2529	21	00	In powder
21	Fluoride	2529	22	00
22	Carbonate calcium (CaCO₃)	2836	50	00	In white powder or granules
23	Flour silicate	2839	90	00	In light yellow powder
24	Chemical paints of all kinds	3208			All kinds of paints for specific industrial decoration (including paints for drilling rid and structures )
24	Chemical paints of all kinds	3209
25	Industrial adhesives	3506
26	Adhesives for brick and big-slate natural stone	3506			adhesives for big-slate brick with size ≥800x800mm
27	Solvents accompanying paints	3814	00	00	In light yellow powder
28	Refractory mortar	3816	00	90	Alum paste and chamotte
29	Mixed construction mortar	3824	50	00	Used for light concrete brick, in completion work of construction sector
30	HDPE plastic tubes for protection of communication cables	3917	21	00	F32 mm - F40 mm
31	HDPE plastic water tubes	3917	21	00	Type of f 20-110mm, with low heat-transfer coefficient, resisting sunlight, not be ionized under ultraviolet ray, resisting the low temperature of -400C
32	PPR plastic water tubes	3917	22	00	Type of f 20-90mm, resisting high temperature and pressure, high durability, good bending resistance, not causing noise and vibration when water flow going pass.
33	PVC tubes and accessories	3917	23	00	F20 - F200 mm
33	PVC tubes and accessories	3917	40	00	F20 - F200 mm
34	Multi-layer aluminium- plastic tubes	3917	39	00	Inner diameter of up to F35 mm
35	Corrosion-resistant coated tubes	3917	39	00	coated by PE/PP or FBE
36	Panel Polyuretan	3921	13	90	thickness of 50 - 200 mm
37	Plastic bath tub	3922	10	10
38	Plastic snap caps and toilet seats	3922	10	90
39	Plastic doors	3925	20	00
39	Plastic doors	3925	30	00
40	Plastic doors with steel core produced from shaped uPVC bar	3925	20	00	Manufactured synchronously from components such as shaped door frame, glassy box, and washer. Having sound insulating, heat insulating property and resisting high pressure; energy saving
41	Plastic roofing sheets and boards	3925	90	00	0.9 mm x 0.8 m x 2 m
42	Civil-use water supply and drainage washers	4016	99	99	installed in pipeline made of cast iron, plastic, concrete
43	Rubber sheets	4016	99	99
44	Electrically insulated carpets	4016	99	99	For a voltage of 10-22-35 kV, of a size of 1 m x 0.64 m x 0.008 m
45	Electrically insulated boots and gloves	4016	99	99	For a voltage of 10-22-35kV
46	Rubber carpets for physical training and sports	4016	99	99	Size of 1 x 0.008 m for badminton courts
47	Wood for chocking or lining on drilling platforms	4407	99	90
48	Coffering wood of standard sizes	4409	29	00
49	Veneer	4408	90	00
50	Particle board	4411
51	Woody goods	4418
52	Ván tre ép tấm compressed - sheet bamboo boards	4602	90	00	For construction formwork
53	Types of blocks, slabs	6801	00	00
53	Types of blocks, slabs	6802
54	Artificial stone origin from quartz	6803			Density of 2.38-2.45 kg/dm3, bending strength of 40 ÷ 70 N/mm3; water absorption of 0.022 ÷ 0.038% based on volume; impact strength of 3 ÷ 5.5 Joule; abrasion resistance of 170÷210 mm3
55	Millstones, grindstones in shape of wheels or the like	6804	10	00	Made of artificial corundum granules, ceramic adhesive. Of an outer diameter of between 5 mm and 900 mm, a thickness of between 5 mm and 300 mm
56	Grindstones of adhesives containing grindstone granules of over 99% of Al203	6804	22	00	Made of artificial corundum granules. Available in square, rectangular and other unusual shapes
57	Edge grindstones, metal-cutting stones, containing grindstone granules of over 99% of AI₂0₃	6804	30		Made of artificial corundum granules, plastic adhesive. Wheel-shaped stones, of an outer diameter of between 100 mm and 350 mm, a thickness of between 1.5 mm and 5 mm
58	Artificial abrasive powder (granule)	6805			Rough and fine granules, made from aluminum bauxite ore
59	Baked clays	6808	00	90
60	Clay tiles	6808	00	10
61	Products of cement and concrete	6810
62	Block bricks	6810	11	00	Created by compressing cement and sand
63	Self-inserting concrete bricks	6810	11	00
64	Electric poles-Centrifugal concrete	6810	91	00	For line of up to 35 kV
65	Concrete piles	6810	91	00	Diameter of 300, 400, 500, 600 mm
66	Prestress centrifugal concrete piles	6810	91	00	Diameter of up to 1200 mm, length of up to 30 m
67	incremental-loading concrete pipes	6810	91	00	Using continuous splash spray technology with steel grid to reinforce for concrete
68	Products of asbestos cement, cellulose fibre cement or the like	6811
69	Roofing sheets of fibro-cement and asbestos cement	6811	40	10	920 x 1500 mm
70	Refractory bricks	6902	10	00	Mg-Chrome, Mg-Spinel (MS80, MS86), Chamotte A (TS A), Chamotte B (TS B)
71	Alkalinity Refractory bricks	6902	10	00	Used for plants producing cement, glass furnaces, steel mills.
72	building bricks, paving tiles, roofing tiles	6904
73	Facing bricks	6907
73	Facing bricks	6908			(Ceramic, granite, Cotton, Terrazzo, Brestonstone, Terastone) size of up to 800 mm x 800 mm
74	Porcelain tiles	6908			size of up to1000 cm x 1000 cm
75	Ceramic sanitary ware	6910	10	00	Of all kinds
76	Flat glass, frosted glass, reflective glass	7004			Of a thickness of between 1.5 - 18mm
76	Flat glass, frosted glass, reflective glass	7005
77	Safety glass	7007			Of a thickness of between 6 and 12 mm
78	Mirror glass	7009			Of a thickness of between 1.5 - 18mm
79	Hot-rolled band and coiled steel, already soaked for rust removal	7208			sign of SPHC/O, of a width of 600 mm or more
		7208	26	00	In coils of a thickness of 3-4 mm
		7208	27	90	In coils of a thickness of 1.5-3mm
		7208	53	00	In sheets of a thickness of 3-4 mm
		7208	54	00	In sheets of a thickness of 1.5-3 mm
80	Unalloyed steel plates	7208	51	00
81	Cold-rolled band and coiled steel	7209			Sign of SPCC, SPCC-1, SPCC-2,4,8, SPCD, SPCE, of a width of 600 mm or more
		7209	16	00	In coils, a thickness of 1-3 mm
		7209	17	00	In coils, a thickness of 0.5-1 mm
		7209	18		In coils, a thickness of 0.15-0.5 mm
		7209	18	91	In coils, with carbon content under 0.6% calculated under weight and a thickness not exceeding 0.17 mm
		7209	18	99	Other type
		7209	25	00	In sheets of a thickness of 3 mm or more
		7209	26	00	In sheets of a thickness of between 1 and 3 mm
		7209	27	00	In sheets of a thickness of between 0.5-1 mm
		7209	28		In sheets of a thickness of between 0.15-0.5mm
		7209	28	10	In sheets, with carbon content under 0.6% calculated under weight and a thickness not exceeding 0.17 mm
		7209	28	90	Other type
82	Products made of iron or unalloyed steel rolled flat, plated or coated	7210
83	Zinc-plated steel sheets	7210	30	11	Of a thickness not exceeding 1.2 mm
84	Aluminium-zinc alloy-plated steel sheets	7210	61	11	Of a thickness not exceeding 1.2 mm
85	Zinc-plated and coloured steel sheets	7210	70	90	Of a thickness not exceeding 1.2 mm
86	Aluminium-zinc alloy-plated and coloured steel sheets	7210	70	90	Of a thickness not exceeding 1.2 mm
87	Products made of iron or unalloyed steel rolled flat, a width of under 600mm, not covered, plated or coated	7211
		7211	23		With carbon content under 0.25% calculated under weight
		7211	23	10	corrugated
		7211	23	20	Shape of hoop and strip, a width not exceeding 400 mm
		7211	90	20	Corrugated, carbon content under 0.6%, calculated under weight
88	Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel.	7213			F5.5 - F40 mm
89	Steel in shapes	7216			Steel with U, I, L, T shapes, of a height of up 140 mm
90	Square steel, box steel of all kinds	7216	91	00
91	Common steel wire (black and zinc-plated)	7217	10	10	F1 - F5 mm
		7217	20	10
92	Cast iron pipes (gray cast iron, ductile cast iron)	7303	00	11	Those of common types and those with a cross-section of F150 - F600 mm and a length of 5 - 6 m
93	pressure pipes, valve gates	7306	30	90	Made of steel for hydropower, a thickness of 6-20 mm, pressure > 15at
94	Bearing steel pipes	7306	30	90
95	Types of steel pipe,black-weld, Zinc-plated	7306	30	90	F14 - F115mm
95	Types of steel pipe,black-weld, Zinc-plated	7306	30	90	F40 - F150 mm; thickness of 6.4-35mm, steel grade X60-X80
96	Types of steel pipe spiral-welded, big size	7306	30	90	F400 - F2,600 mm
97	Steel girdles of road bridges and railroad bridges	7308	10	90	Steel girdles of road bridges of a span of up to 100 m, a tonnage of H30, Steel girdles of railway bridges, of a span of up to 100 m, and a tonnage of T26
98	Steel structures of all kinds	7308	10	90
99	All kinds of doors and door frames of iron or steel	7308	30	00	Of common types
100	House frames, warehouse frames, prefabricated house structures of steel	7308	90	20	Including space roof truss
101	Steel pole for electric lines	7308	90	99
102	Roofing sheets- zinc-plated or coloured steel sheets in segment shape	7308	90	99	A thickness of 0.25-0.55 machinery; length of 3500 mm
103	Telecommunication aerial mast	7308	90	99
104	Aerial mast	7308	90	99	10-80m
105	Tank of all kinds	7309	00	00	Of common types
106	Casks of all kinds	7310			Of common types
107	Steel cables	7312	10	10	Structured of up to 37 fibers, a cross section of up to 170 mm2
108	Zinc-plated wire, barbed wire	7313	00	00
109	Steel or iron grill, netting, fencing	7314	20	00	Of common types
109	Steel or iron grill, netting, fencing	7314	50	00
110	Iron and steel nails	7317
111	Screws, bolts, nuts, washers	7318			Of common types
112	Products of shower:
	- Hot and cold showers	7324	90	99	Type of 02 water-flows used for restroom
	- Cold bathroom showers	7324	90	99	Type of 01 water-flow used for restroom
	- Hot and cold lavatory faucets	7324	90	99	Type of 02 water-flows used for restroom
	- Cold faucet	7324	90	99	Type of 01 water-flow used for restroom
	- Cold tap to wash up dishes	7324	90	99	Type of 02 water-flows used for kitchen room
	- Pond faucet	7324	90	99	Type of 02 water-flows used for washing hands
113	Bar copper	7407	10
114	Round copper wire	7408	11	10	With a cross section of between 16 and 630 mm2
115	Conductor made of alloy (copper, zinc)	7408	21	00	f2,6 mm, f 8mm, f 17 mm;
116	sheet copper	7409	11	00
117	Tubes and copper pipelines of all kinds	7411	10	00
		7411	21	00
		7411	22	00
118	Uncoated copper cable	7413
119	Shaped aluminium structures	7610	10	00
		7610	90	90
120	Electric wires - uncoated aluminum cables with steel cores	7614	10		Of a cross section of between 35 to 1,200 mm2
121	Electric wires - uncoated aluminium cables	7614	90		Of a cross section of between 16 to 1,200 mm2
122	Electric cables	7614			(A, AC, ACSR, TK for lines transmitting power)
123	Iron cabinets	8302	50	00
124	Iron mountings	8302	50	00
125	Safety signboards	8310	00	00	Of a mixture of composite plastic and glass fibers
126	Welding rods	8311	20		NAEH14 size of f2.4; f3.2; f4.0mm
					N71T-I size of f1.0; f1.2; f1.6 mm
					NA71T-S size of f1.0; f1.2; f1.6 mm
					NA71T-G size of f1.0; f1.2; f1.6 mm
					NA70S size of f0.8 - f1.6 mm
127	Welding sticks	8311	30		NT6013, NB6013, NA6013, NA7016, NA7018 size of f2.5; f3.25; f4.0; f5.0-f5.4 mm
128	Multi-purpose joints	8483	60	00	HH50
129	Self-dropping fuse	8535	10	00	6-35kv
130	Load breaker switches	8535	30	11
131	High-voltage switches	8535	30	20
132	Tube fuse	8536	10		F24 x F32 made of composite
133	The meter protection boxes made of iron or composite	8537			Box containing 1,2, 4,6 single-phase meters, Box containing three-phase meter
134	Wire distribution boxes	8538	10		Iron box with 6 routes, composite box with 6 routes, 9 routes
135	Electric lamp of all kinds	8539	21
		8539	22		filament lamps of common type
		8539	39	10	Compact lamps of 2U, 3U, capacity of 5-20W
		8539	39	10	FHF Fluorescents, capacity of 32W, FLD Fluorescents, capacity of 18W and 36W
136	Cables with core made of copper, aluminium, AC insulated PE, PVC for medium-voltage and low-voltage overhead lines	8544			Type of 1 or 2 cores with cross section of single core of up to 630 mm² Type of 3 or 4 cores with cross section of single core of up to 400 mm²
137	High-voltage, medium-voltage, low-voltage Plastic and EPR insulated electric cables	8544			with the maximum cross section for single phase of up to 2000 mm² (core), voltage of between 0.6kv and 170kv
138	Control cables of all kinds	8544			with from 2 cores to 91 cores, cross section of between 0.5 and 16 mm²
139	Telephone cables	8544			Diameter from 0.4-0.9 mm, from 6 – 1,200 couples
140	Lan cables	8544			CAT5, CAT5E, CAT6
141	Telephone subscriber line	8544			One or many fibers
142	Fibre-optic cables	8544	70	10	Used for postal sector
143	transformer porcelain of 36 KV	8546	20	90	Sign 36 NF250 CD1650. rated voltage of 36 KV, rated current of 250A, transosonde length of 1650 mm, weight of 15kg, brown glaze
144	House frames prefabricated and structures of steel	9406	00	94	For civil construction and hydropower

ANNEX III

LIST OF RAW MATERIALS, SUPPLIES AND COMPONENT WHICH CAN BE PRODUCED DOMESTICALLY
(Issued with Circular 04/2012/TT-BKHDT of August 13, 2012, of the Ministry of Planning and Investment)

No.	Name of goods	Code in the import tariff list			Symbols of specifications, description of technical features
No.	Name of goods	Heading	Sub-heading
1	Decaffeinated coffee	0901	12		Humidity between 10.4 and 12.5%
2	Crude Soybean oil	1507	10	00
3	Refined Soybean oil	1507	90	20
4	Crude Groundnut oil	1508	10	00
5	Refined Groundnut oil	1508	90	90
6	Unrefined fractions of Palm oil	1511	90	11
6	Unrefined fractions of Palm oil	1511	90	19
7	Others of Palm oil	1511	90	91
		1511	90	92
		1511	90	99
8	Refined sunflower-seed oil	1512	19	90
9	Crude coconut (copra) oil	1513	11	00
10	Refined coconut (copra) oil	1513	19	90
11	Refined low erucic acid colza oil	1514	19	20
12	Others of refined low erucic acid colza oil	1514	99	91
13	Crude sesame oil	1515	50	10
14	Others of sesame oil	1515	50	90
15	Cane or beet sugar and sucrose:	1701			chemically pure, in solid form
	- Raw sugar not containing added flavoring or coloring matter
	- - Cane sugar	1701	14	00
	- - Beet sugar	1701	12	00
	- Others:
	- - containing added flavoring or coloring matter	1701	91	00
	- - Others:	1701	99
	- - - Refined sugar:
	- - - - White sugar	1701	99	11
	- - - - Others	1701	99	19
	- - - Others	1701	99	90
16	Glucose	1702	30	10
17	Condensed tomato	2009	50	00
18	Shrimp powder	2103	90	40
19	Crab sauce powder	2103	90	90
20	Vinegar	2209	00	00
21	Dry Coconut jelly	2306	50	00	Length of 27cm, width of 17cm, thickness of 0.5-2cm
22	Cocopeat	2306	50	00	Packaged under request of customer
23	Cattle food	2309	90
24	Shrimp food	2309	90	13
25	Fish food	2309	90	19
26	Tobacco, not stripped	2401	10		yellow dried, dried in the sun into brown, burley type
27	Tobacco, stripped	2401	20		yellow dried, dried in the sun into brown, burley type
28	Tobacco stems	2401	30	10	Big stems, small stems (diameter > 1.5mm, humidity of 9-10%)
29	Table salt	2501	00	10
30	Refined salt and sodium chloride	2501	00	20
31	Iodized salt	2501	00	90
32	Pure pyrite ore	2502	00	00	FeS₂ (≥ 33% S)
33	Fire clay	2507	00	00
34	Apatite ores of all kinds	2510	10	10	Ca₅F(PO₄)₃ with a gross content of P₂O₅ ≥ 24%
35	Marble slates	2514	00	00
36	Granite slates	2514	00	00
37	Dolomite	2518	10	00
38	Serpentine ore	2519	10	00	MgO.SiO₂2H₂O
39	Lime	2522
40	Clinkers for manufacture of cement	2523	10
41	Fluoride ores, pure ores	2529			CaF₂>75%
42	Iron ores	2601	11	00
43	Agglomerated iron ores	2601	12	00
44	Manganese ore	2602	00	00	Mn: 35-40%
45	Pure copper ore	2603	00	00	18-20% Cu
46	Pure lead sulphide ore	2607	00	00	55% Pb
47	Zinc ores of all kinds	2608	00	00	28-30% Zn
48	Pure chromium ore	2610	00	00	46% Cr₂O₃
49	Pure wolframite ore	2611	00	00	65% WO₃
50	Pure ilmenite ore	2614	00	10	TiO₂: 52-54%
51	Rutile	2614	00	10	TiO₂: 90%
52	Pure zircon ore	2615	10	00	ZrO₂: 62-65%
53	Fat coal	2701	12	10
54	coke for metallurgy	2704	00	10
55	Liquefied chlorine	2801	10	00	Cl₂ ≥ 99.5%
56	Carbon blacks	2803	00	40	Carbon Content ≥ 98%
57	Bottled nitrogen	2804	30	00	Nitrogen > 99.95%, liquefied nitrogen > 99.95%
58	Bottled oxygen	2804	40	00	In liquefied gas 0₂ > 99.6%
59	Yellow phosphorus	2804	70	00
60	Neodym Metal (Nd)	2805	30	00
61	Neodym - Praseodym (Pr-Nd)	2805	30	00
62	Dysprosium Ferrous Alloy (Dy-Fe)	2805	30	00
63	Hydrochloric acid	2806	10	00	HCl (KT) ≥ 30%: Pure hydrochloric acid
64	Sulfuric acid	2807	00	00	H₂SO₄ ≥ 97%
65	Nitric acid	2808	00	00	Concentrated nitric acid 99%
66	Phosphoric acid	2809	20		H₃SO₄ ≥ 98%
67	Carbon dioxide (liquid, solid)	2811	21	00	Purity > 99.6%
68	NaOH	2815	11	00
69	Sodium hydroxide	2815	12	00
70	Zinc oxide powder	2817	00	10	60% Zn, 80-90% ZnO
71	Aluminum hydroxide	2818	30	00	Al(OH)₃ (≥ 63% Al₂O₃)
72	Dioxide mangan	2820	10	00	MnO₂ ≥ 68%
73	Sodium Chloride	2827	39	90
74	Aluminum sulfate	2833	22	10	Al₂(SO₄)₃.18H₂O (≥ 15% Al₂O₃) Al₂(SO₄)₃.14H₂O (≥ 17% Al₂O₃)
75	Aluminum ammonium sulfate	2833	22	90	AlNH₄(SO₄).12H₂O (≥ 10.3% Al₂O₃)
76	Alum	2833	30	00
77	Dicalcium Phosphate (DCP)	2835	25	00	Maximum humidity: 5%; phosphorus (P) min 17%; calcium (Ca) min 21%; Fluoride (F) max 0.18%. Arsenic (Ast max 0.003%, max heavy metal 0.003%
78	Disodium carbonate	2836	20	00
79	Maggie carbonate	2836	99	00
80	Sodium silicate	2839	19	10	NaSiO₃ Module 2.2-3.4
81	Zeolite 4A	2842	10	00	Na₁₂[(AlO₂)₁₂.(SiO₂)₁₂].27H₂O used as materials to manufacture washing powder, replacing for STPP (Sodium Tripoli Phosphate)
82	Peroxide of concentration ≥ 35%	2853	00	00	Ion acid concentration (based on sulfuric acid) ≤ 0.04%; non volatile concentration of substance ≤ 0.08%; stability ≥ 97%; concentration of total CO₂(calculated on C) ≤ 0.025%; salinity of Nitoric acid (calculated on NO₃) ≤ 0.02%
83	Peroxide of concentration ≥ 50%	2853	00	00	Ion acid concentration (calculated on sulfuric acid) ≤ 0.04%; non volatile concentration of substance ≤ 0.08%; stability ≥ 97%; concentration of total CO₂(calculated on C) ≤ 0.035%; salinity of Nitoric acid (calculated on NO₃) ≤ 0.025%
84	Acetylene (C₂H₂)	2901	29	10	Purity > 99.7%
85	Surfactants	2902	90	90	used for production of cleansing substances (LAS)
86	monosodium glutamate	2922	42	20
87	Compounds for production of antibiotics	2941	10		Amoxicillin, ampicillin
88	Artemisinin	2942	00	00
89	Vinachitin biological films	3001	90	00
90	Carbon cancellous bones	3001	90	00
91	Surgical cotton bands	3005	10	10
92	Carbon cotton bands	3005	90	10
93	Surgical cotton bands (being or not being sterilized)	3005	90	10
94	Plaster cast of all sizes	3005	90	10
95	Biological polymer bands	3005	90	10
96	Sterilized navel dressing	3005	90	10
97	Sterilized bandage with gauze	3005	90	10
98	Adhesive gauzes	3005	90	20
99	Sterilized surgical gauzes	3005	90	20
100	Surgical absorbent gauzes	3005	90	20
101	Biological polymer films on gauze background	3005	90	90
102	Biological polymer films	3005	90	90
103	Surgical sutures of all kinds and sizes	3006	10	90
104	Ammonium nitrate	3102	30	00
105	Chemical fertilizers containing N, P, K	3105	20	00	mineral manures or Chemical fertilizers containing three elements of nitrogen, phosphorus, potassium
106	Diammonium phosphate	3105	30	00
107	Distempers	3210	00	20
108	Polyurethane paint	3210	00	50
109	Pigments of all kinds	3212	90
110	Printing ink of all kinds	3215			used to print identification
111	Flexo printing ink	3215	11	90	To print on carton packing
112	Gravure printing ink	3215	11	90	To print on PP, PE, OPP films
113	Shrimp oil	3302	10	10
114	Cleansers in liquid form	3402	20	19
115	PU glues	3506	91	00
116	Prepared explosives	3602	00	00	Pursuant to Decision 03/2006/QD-BCN of the Ministry of Industry
117	Industrial explosives of all kinds	3602	00	00
118	Detonators, blasting fuses, detonating cords	3603			Pursuant to Decision 03/2006/QD-BCN of the Ministry of Industry
119	Compound plasticizers for rubber or plastic	3812	20	00	DOP plasticizer
120	Chemicals for surface treatment	3814	00	00
121	Solvents	3814	00	00
122	Calcium carbonate powder coated stearic acid	3825	90	00	Used in processing rubber, PVC plastic, printing ink, paint, porcelain, with fat acid content covering surface of 2.8-3.2%: product with content of organic titanates covering surface 1%, applied in manufacture of PVC leatherettes, cables having affect reducing adhesiveness upon mixing, helping for fast forming product
123	Synthetic resin granules	3901	90	90
124	PVC granules	3904	10	91
125	PU Synthetic resin	3909	50	00
126	PU-resin plastic	3909	50	00
127	friction-substance of all kinds	3911	90	00
128	PVC; PE films	3919
129	plastic films	3920	43	00	Thickness of 0.05-0.4 mm
130	plastic composites	3921
131	Spongy plates made of PVC plastic	3921	12	00
132	Plastic bags of all kinds	3923	21	99
133	PET preforms and bottles of all kinds	3923	30	90
134	Plastic plates for documents laminator	3926	10	00
135	Urine bags	3926	90	39
136	Fluid transmission tubes	3926	90	39
137	Natural rubber	4001	10
		4001	21
		4001	29
138	Tanned skins of bovine	4104
139	Fuel wood, in logs, in billets	4401	10	00
140	Wood chips	4401	21	00
141	Wood chips of non-coniferous wood	4401	22	00
142	Coconut shell charcoal (sintered charcoal)	4402	90	10	of many sizes
143	Veneer	4408	90	00
144	Particle board	4411
145	Small wood pieces for making matches	4421	90	20
146	Newsprint, in rolls or sheets	4801	00	10	Of a standard weight of 42-55 g/m2
147	Uncoated paper and paperboard, of a kind used for printing, writing or photocopying, card-making, punch tape paper or waxed base for manufacture of technical paper	4802			Of a standard weight of 40-120 g/m2. Excluding those under subheadings of: 4802.51.20, 4802.60.20, 4802.30.00, 4802.40.00, 4802.20.00
148	Paper shoe insoles	4804	19	00	For lining shoes
149	Cement packing paper	4804	21	10	Of a standardized weight of 68-75 g/cm2
150	Uncoated and unbleached packaging paper of a low durability	4804	31	90	for packing goods and production of small boxes holding goods
151	Uncoated paper and paperboard in rolls or sheets: corrugated, common type, double-sided Duplex, Duplex with one side in white and another in gray	4807	00	00
152	Ultrasound papers	4810	13	11
153	200-cigarette cartons with 20 cigarettes in each pack, stiff packs of all kinds	4819	10	00	385*287mm
154	Three-ply, five-ply cartons	4819	10	00
154	Three-ply, five-ply cartons	4819	20	00
155	200-cigarette cartons with 20 cigarettes in each pack, soft packs of all kinds	4819	10	00	366287mm and 376287mm (Paper or paperboard used as packing)
156	Paper boxes, each for containing a pair of shoes	4819	10	00
156	Paper boxes, each for containing a pair of shoes	4819	20	00
157	Labels of 20-cigarette stiff packs of all kinds	4821	10		233.5*99.5mm
158	Bobbins made of paper pulp	4822	90	90	Width of 400mm, length of 1.85m
159	Base paper, printed, for rolling cigarette filter tips	4823	90	99	Of a standard weight of 28-30 g/cm²
160	Cigarette filter tips	4823	90	99
161	Fabrics for Kimono	5007	20	90	embroidered under pattern
162	Woven fabrics of wool from sheep, containing 85% or more by weight of wool from sheep	5112	90	00	100% wool, plain weave, twill
163	Kapok, cotton ceiling slab, crochet cotton	5201	00	00
164	Ring yarn	5205			Cotton yarn, weave sewing slub cotton
165	OE yarn of all kinds	5205	12	00	index NE 5.5-20, 100% cotton
166	Uncombed cotton yarn	5205	12	00
167	Cotton yarn	5205	13	00
168	30/1 cotton yarn	5205	13	00	100% cotton
169	32/1 yarn	5205	14	00	100% cotton
170	40/1 cotton yarn	5205	14	00	100% cotton
		5205	11	00	Ne 7-8.4
		5205	12	00	Ne 8.5-20
	- Uncombed	5205	12	00	CD (Card)
		5205	13	00	CD (Card)
		5205	14	00	CD (Card)
		5205	33	00	T (Twist)
	- Combed	5205	43	00	T (Twist)
		5205	44	00	T (Twist)
		5205	23	00	CM (Comb)
		5205	24	00	CM (Comb)
		5206	24	00	CVC (40% polyester + 60% comb)
		5206	25	00	CVC (40% polyester + 60% comb)
171	Calico fabrics	5208	11	00	Plain weave, weighing not more than 100 g/ m2
		5208	12	00	Plain weave, weighing more than 100 g/ m2
	- twill 2/1, twill 3/1	5208	13	00	3-thread or 4-thread twill, including cross twill
172	Plain weave 5/3, fabrics with combined weave	5208	19	00	Other fabrics
173	Calico fabrics, linen, fiber	5209	11	00	Plain weave
173	- twill 2/1, twill 3/1	5209	12	00	Plain weave, 3-thread or 4-thread twill, including cross twill
174	Plain weave 5/3 and type of combined weave	5209	19	00	Other fabrics
175	Jean fabrics of all kinds	5209	22	00	Fabric of material of 100% cotton, cotton polyester, cotton polyester spandex, etc, of weight between 7 and 15OZ, width of between 55’ and 63’, index of fibers between 6 and 16Nc
176	Kate 65/35, 83/17	5210	11	00	Plain weave
		5210	19	00	Other fabrics
		5211	12	00	Plain weave, 3-thread or 4-thread twill, including cross twill
177	Woven fabrics of cotton, weighing not more than 200 g/ m2.	5212	13	00	Twill, Plain weave
178	Woven fabrics of cotton, weighing more than 200 g/ m2.	5212	23	00	Twill, Plain weave
179	Coir yarn	5308	10	00	tangled, smooth
180	Polyester yarn	5402	52	00	PE yarn used for sewing and weaving
181	PP yarn	5404	12	00
182	Monofilament yarn	5404	19	00	Material used for zipper production
183	Polyester yarn	5406	00	00	Width of 230mm, length of up to 5000m
184	Tyre woven fabrics	5407	20	00	Width of 127cm, length of 4.5m
185	Polymer fabrics	5407	72	00
186	Kate viscose	5408	10	10	woven fabrics obtained from high tenacity yarn of viscose rayon, unbleached
187	Sewing thread made of synthetic staple fiber	5508
188	Yarn (except for sewing thread) made of synthetic staple fiber	5509	11	00
189	Polyester yarn	5509	21	00
190	T/C yarn	5509	53	00
191	Yarn mixed between PE and Cotton (Peco yarn)	5509	53	00
192	PE yarn	5509	21	00	100% PE
193	30/l PE yarn	5509	21	00	100% polyester
194	40/l PE yarn	5509	21	00	100% polyester
195	30/l TC yarn (65/35)	5509	53	00	65% polyester + 35% cotton
196	45/l TC yarn (65/35)	5509	53	00	65% polyester + 35% cotton
197	30/l TR yarn (65/35)	5509	51	00	65% polyester + 35% viscose
198	Single yarn	5509	21	00
199	Multi-folded yarn	5509	22	00
		5509	62	00	ACM (Acrylic and Comb)
		5509	12	00
200	30/l VISCOSE yarn	5510	11	00	100% viscose
		5510	11	00	PE (polyester)
		5510	30	00	P/C (polyester and cotton)
		5510	12	00	T (Twist)
201	Yarn of synthetic staple fibers, containing less than 85% by weight of such fibers	5511	20		Types of T/C yarn, index of Ne20-Ne46
202	Woven fabrics of polyester staple fibers containing less than 85% by weight of such fibers, mixed mainly or solely with cotton, of a weight not exceeding 170 g/m2.	5513	23	00	Other woven fabric of Stapen polyester fibers
203	Woven fabrics of polyester staple fibers containing less than 85% by weight of such fibers, mixed mainly or solely with cotton, of a weight not exceeding 170 g/m2.	5513	31	00	Fibers with various colors
204	Woven fabrics of polyester staple fibers containing less than 85% by weight of such fibers, mixed mainly or solely with cotton, of a weight more than 170 g/m2.	5514	21	00	plain weave fabrics
205	Woven fabrics of polyester staple fibers containing less than 85% by weight of such fibers, mixed mainly or solely with cotton, of a weight more than 170 g/m2.	5514	22	00	Other woven fabrics of polyester staple fibers
206	Other woven fabrics of synthetic staple fibers, mixed mainly or solely with wool or fine animal hair	5515	13	00	Fabrics for uniforms, fashion sewing of plain weave and twill
207	Other woven fabrics of synthetic staple fibers, mixed mainly or solely with Viscose rayon fibers	5515	11	00	Fabrics for clothes of plain weave, twill and colored
208	Other woven fabrics of synthetic staple fibers, mixed mainly or solely with wool and Viscose rayon fibers	5515	19	00	Fabrics for uniforms, fashion sewing of plain weave and twill
209	Nonwovens of all kinds	5603	94	00
210	Rubber thread of all kinds	5604	10	00
211	Monofilament	5404	19	00	Material used for zipper production
212	Cotton and polyester shoelaces	5609
213	2-side fuzz fabrics	5801	36	10
214	Towels	5802	11	00	Terry of all kinds, floating-ring fabrics
215	Weaved labels of all kinds	5807	10	00
216	Prepared canvas	5901	90	20
217	Textile fabrics coated with gum	5901	90	90
218	Tyre cord fabric of high tenacity yarn	5902
219	Fabrics coated with plastics,	5903			compact leatherette, porous leatherette, canvas, soft fabrics
220	PE packing	5903	90	00	Packing of rolled fabrics, PP fiber packing, PE bags, packing with printing maximally 9 colors and 2 sides, HDPE bags, coated 02 sides on PP packing
221	PP packing	5903	90	00	Packing of a layer packing, inside coated film weaved by PP film, being bright white for bag of 25 kg, being milky white for bags of between 40 kg and 50 kg
222	Rubber-coated fabrics	5907
223	Fabrics soaked, coated of covered by other materials	5907	00	90	Fabrics coated for antileakage
224	Fabrics for air bag of automobile	5911	90	90
225	Geotextile	5911	90	90
226	Knitted fabrics from cotton	6006	22	00	Dyed
226	Knitted fabrics from cotton	6006	21	00	Not yet or have been bleached
227	Uppers whether and parts thereof, other than stiffeners	6406	10
227	Uppers whether and parts thereof, other than stiffeners	6406	10	90
228	Shoe soles and heel cushions of rubber or plastics	6406	20	00
	Others:
	- Wooden	6406	90	10
	- Of other materials:	6406
	- - metal
	- - - iron or steel	6406	90	21
	- - - copper	6406	90	29
	- - - others	6406	90	29
	- - rubber or plastic:
		6406	90	31
		6406	90	32
229	Granite blocks	6802	23	00
229	Granite blocks	6802	93	00
230	Abrasive powder	6805			Of common-use category
231	Woven fabrics	6812	80		Of all kinds
232	High alumina brick	6902	20	00
233	Chamotte bricks	6902	90	00
234	Medical glass tubes	7002			f5 - f32 mm
235	Flat white and colored sheet glass	7003			Of common-use category, and a thickness of 1.5- 12 mm
236	Medicine bottles and pots of glass	7010			2310A-2825CE (from 2ml to 30ml)
237	Empty glass ampoules for containing injection fluids	7010	10		From 1 to 10 ml (flat bottom, bell- shaped head, needle-shaped tips, in brown or white color)
238	Incandescent light bulb shell (bulb)	7011	10		A 60 (round-shaped lamps of all kinds )
239	Fluorescent lamp shell (tubes)	7011	10		f12 - f40 mm
240	High-quality composite material	7019	90	90	Composite material manufactured from type- E glass fiber prepreg, apply in shipbuilding industry
241	Inners of vacuum flasks	7020	00	30
242	Finished diamonds	7102	31	00	0.5mm-5.4mm
243	Gemstones	7103			ruby, sapphire
244	Gold	7108	13	00	99.99% Au
		7113	19	90	09K, 14K, 18K
		7113	20	90	18K GCC
245	Pearls	7116	20	00
246	Copper	7117	19	90
247	Iron cast	7201	20	00
248	Ferro manganese	7202	11	00	FeMn (65-75%)
248	Ferro manganese	7202	19	00
249	Ferro Silicon	7202	21	00	FeSi (45%)
249	Ferro Silicon	7202	29	00
250	Ferrochrome	7202	41	00	%Cr: 50-65%; %C<10%
241	Ferro wolfram	7202	80	00	W 75% size of between 10 and 50 mm
252	Steel casts	7206	90	00
253	Hot-rolled coil steel, already soaked for rust removal	7208	26	00	Of a thickness of from 3-4 mm
253	Hot-rolled coil steel, already soaked for rust removal	7208	27		Of a thickness of from 1.5-3 mm
254	Cool-rolled plate and band steel	7209			Of a thickness of from 0.15-1.8 mm
255	Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated.	7209
	- In coils, not further worked than cold-rolled (cold-reduced):
	- - Of a thickness of 3 mm or more	7209	15	00
	- - Of a thickness exceeding 1 mm but less than 3 mm	7209	16	00
	- - Of a thickness of 0.5 mm or more but not exceeding 1 mm	7209	17	00
	- - Of a thickness of less than 0.5 mm	7209	18
	- - - with carbon content less than 0.6% calculated on weight and a thickness not exceeding 0.17mm	7209	18	91
	- - - Others	7209	18	99
	- Not in coils, not further worked than cold-rolled (cold-reduced):
	- - Of a thickness of 3 mm or more	7209	25	00
	- - Of a thickness exceeding 1 mm but less than 3 mm	7209	26	00
	- - Of a thickness of 0.5 mm or more but not exceeding 1 mm	7209	27	00
	- - Of a thickness of less than 0.5 mm:	7209	28
	- - - with carbon content less than 0.6% calculated on weight and a thickness not exceeding 0.17mm	7209	28	10
	- - - Others	7209	28	90
	- - corrugated	7209	90	10
	- - Others	7209	90	90
256	Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated	7211
	- - with carbon content less than 0.25% calculated on weight:	7211	23
	- - - Corrugated	7211	23	10
	- - - Shape of hoop and strip, a width not exceeding 400 mm	7211	23	20
	- - - Others, a width not exceeding 0.17mm	7211	23	30
	- - - Others	7211	23	90
	- - - Corrugated	7211	29	10
	- - - Shape of hoop and strip, a width not exceeding 400 mm	7211	29	20
	- - - Others, a width not exceeding 0.17mm	7211	29	30
	- - - Others	7211	29	90
	- - - Shape of hoop and strip, a width not exceeding 400 mm	7211	90	10
	- - - Corrugated, with carbon content less than 0.6% calculated on weight	7211	90	20
	- - - Others, a width not exceeding 0.17mm	7211	90	30
	- - - Others	7211	90	90
257	Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel.	7213
	- - Of circular cross-section measuring less than 14 mm in diameter:	7213	91
	- - - Concrete steel	7213	91	20
258	Steel belting	7212	40	20	12.7mm-32mm
259	Deformed bar steel	7213	10	00	CT5, 20 MnSi from D10 to D25
260	Bar steel	7213	10		f < 100 mm
260	Bar steel	7213	91		f < 14 mm
261	Plain bar steel	7213	99	90
262	Welding rod cores	7213	99	10
263	Bar steel, non-alloy	7214	10		With a carbon content > 0.6%
264	Bar steel, non-alloy	7214	91	10	Rectangular or square cross-section, C > 0.6%
265	Non-alloy steel, in angles, shapes and sections	7216	10	00	in U, I, H shapes, of a height l < 80mm
266	Steel in L shape	7216	21	00	L shape, of a height l < 80mm
266	Steel in L shape	7216	40	00	L shape, of a height l from 80-140 mm
267	Steel in U shape	7216	31	00	U shape, of a height I from 80-140 mm
268	Steel in J shape	7216	32	00	I shape, of a height I from 80-140mm
269	Steel in H shape	7216	33	00	H shape, of a height I from 80-140 mm
270	Steel in C, V shapes	7216	50	90	C,V shapes, of a height I from 80-140 mm
271	Purlin steel	7216	91	00	H = 250 mm
272	Steel wires	7217	10	10	Not galvanized
272	Steel wires	7217	20	10	galvanized
273	Galvanized sheet steel	7219	24	00	0.13mm-0.4mm
274	Sheet steel, inox coil steel and products processed after rolling	7221	00	00
275	Stainless steel wires	7221	00	00
276	Alloyed steel in shapes	7228	70	90	SS400, SS540 from L80 to L130; Q235 from C80 to C180
277	Welding rod of all kinds	7229	90	90
278	Tubes and pipes of cast iron	7303	00	90	Of common-use category
279	pressure conduits (under segment)	7304	39	20	Used in hydropower works
280	Dividing-water forks (cluster)	7304	39	90	Used in hydropower works
281	Flat valve gates, valve grooves	7304	39	90	Used in hydropower works
282	Segment valve gates, valve grooves	7304	39	90	Used in hydropower works
283	Surge tank	7304	39	90	Used in hydropower works
284	Axle-bearing of radius valve made of cast steel, of a weight of up to 17 tons	7304			Used in hydropower works
285	Vertical welded steel tubes and pipes	7305	31	90	of a diameter of up to 1,524mm
286	High-pressure welded steel tubes and pipes	7305	39	10	of a diameter of up to 1,524mm
287	High-voltage electric pole, galvanized, dipped	7308	20		For lines of up to 500kV
288	Steel rail galvanized, hot-dipped	7308			For transformer station of up to 500 kV
289	Steel aerial mast galvanized, hot-dipped of self- standing type	7308	90		Of up to 90m
290	Steel aerial mast galvanized, hot-dipped of guy (shrinking-wire aerial mast) and accessories to install equipment	7308	90		a height of up to 50m
291	Steel structures	7308			Of common-use category and steel house frames, roadway crane beams, with aperture of up to 100 m, tonnage H30, steel railway girder with aperture of up to 100 m, tonnage T26
292	Tanks	7309	00		Of common-use category
293	Casks	7310	10		Of common-use category
294	Casks containing phosphorus	7310	10	90	Size of: 500x800mm, closed test pressure of 30kPa, hydraulic power test pressure of 250kPa, capacity of 157litre, use environment of: phosphorus, utility: containing phosphorus
295	Cans	7310	21
296	Wattles, iron fences	7314			Of common-use category
297	Chains	7315			Of common-use category
298	Common bolts, screw nuts	7318			Of common-use category
299	Butterfly perfuse needles	7319	90	90
300	Grinding steel balls	7325	91	00	Of common-use category
301	Ingot moulds	7325	99	90
302	Printing-Axles made of copper tube	7326	90	90	Iron core, copper-plated
303	Round copper wire	7408	11	10	Cross section of from 16-630mm2
304	Flat magnet wire	7408	11	00	Of a maximum cross section of 50 mm2
305	copper materials in wire shape	7408	11	00	copper materials to manufacture electric cables f 6 - f14 mm
305		7408	19	00	f < 6 mm
306	Sheet copper, bus bar	7409	11	00	A maximum cross section of 50x160 mm2
307	Silver, copper gears	7411	22	00	Of up to f 1,500 mm
308	Copper tubes	7411	10	00
309	Bare copper cables	7413			For medium-voltage, low-voltage lines
310	Bare copper cable	7413
311	Screws, nuts	7415	33	10
312	Nails	7415	10	10	Diameter of 1.7 mm – 4.2mm
313	Bar aluminum of all kinds	7601	10	00
314	Aluminum foils and aluminum alloys	7601	20	00
315	Shaped aluminum foils	7604	10	90
316	Bar aluminum	7604	29	10
317	Covered- aluminum cables	7605			For medium-voltage, low-voltage lines
318	Bare copper cables	7605			For medium-voltage, low-voltage lines
319	Shaped aluminum bars	7610
320	Conductors, aluminum cables, uncoated, with steel core	7614	10		Cross section of from 35-1200mm2
321	Aluminum cables with steel core	7614	10		For medium-voltage, low-voltage lines
322	Uncoated aluminum cables with steel cores	7614	10		Cross section of up to 600 mm2
323	Conductors, uncoated aluminum cables	7614	90		Cross section of from16-1200 mm2
324	uncoated aluminum cables	7614	90		For medium-voltage, low-voltage lines
325	Uncoated aluminum cables (non alloy)	7614	90		Cross section of up to 600 mm2
326	Aluminum grid	7616	91	00
327	Bar lead	7806	00	90	99.6% Pb
328	Zinc powder, dust and flakes (sulfate)	7903	90	00	48-50% Zn
329	Tin bars	8003	00	10	99,75% Sn
330	Handsaws, saw blades of all kinds	8202			Of common-use category
331	Stables	8305	20	10	50 pieces/box Size No.10
332	Wolfram electrodes	8311	10	00	f 2.4 x 175; 2.4 x 150; f 3.2 x 175; f 3.2 x 150; 1.6 x 175; x 150; 4 x 175 (mm)
333	Sugarcane-planting combined machines	8432	90	90	Of common-use kinds following tractor
334	Supplying-paper sets	8443	99	30	RM1-6922-000 (for printers)
335	Wiper blades	8443	99	90
336	Optical eye bracket for DVD	8473	40	19	A cluster of components including plastic bracket, circuit board and copper wire mounted
337	Valves of all kinds	8481	20	90
338	Washers of all kind	8481	90	29
339	Details of valve	8481	90	29
340	Ball bearings	8482	80	00	Type of 24k and 30k
341	Carbon brush motor	8501	10	91	QK1-5868-000A, S8-71961, S8-71957, S8-71958, S8-71969, S8-71983, SS8-71974 (User for printers)
342	Plastic resin magnet	8505	19	00
343	Electrostatic-painted steel protection boxes of electric meter	8536	90		For electric grid works
344	Wire-division boxes made of steel, electrostatic-painted	8536	90		For electric grid works
345	Shells of electric cabinet electrostatic- steel - painted	8537	10	19	For electric grid works, control
346	Fluorescent lamp heads	8539	90	10	G13/12*30(26)
347	Conductors	8544			Not including coaxial cables
348	PE, PVC covered cables	8544	11	20	All kinds
349	Transformer porcelain	8546	20	10	Symbol: 36NF 250 CD1650. Rated voltage: 36KV. Rated current: 250A, length of transosonde: 1650mm, weight of 15kg, enamel color on product: brown
350	Accessories of motor vehicles	8708
351	Accessories of motorbike and bicycle	8714
352	Synthetic composite materials used for trade planes	8803	30	00	door at behind of engine, with utility supporting for plane to land and take off
353	Lead rubber	9018	90	90	used in medical sector
354	Handheld automatic measuring-methane Equipment	9026	80	10	Measurement range: 0-3% CH4, error: 0.1% when concentration of CH₄ (0-2%), display LED 7 parts, source voltage 5DVC, use Ni-NH rechargeable battery cell
355	composite meter protection box	9028	90		For electric grid works; type of 01 meter, single phase; type of 02 meters, single phase; type of 04 meters, single phase, type of 01 meter, 03 phases
356	Composite wire-division box	9028	90	90	For electric grid works
357	SKD components of rubber shot gun, tear gas	9305	99	99	YSR007, Colt Python, rubber shot, tear gas
357	SKD components of rubber shot gun, tear gas	9305	99	99	Record COP, type of magazines, 10x22T, rubber shot, tear gas
358	SKD components of electric rods	9305	99	99	K200, electric rods

ANNEX IV

LIST OF SUPPLIES NECESSARY FOR PETROLEUM ACTIVITIES WHICH CAN BE PRODUCED DOMESTICALLY
(Issued with Circular 04/2012/TT-BKHDT of August 13, 2012, of the Ministry of Planning and Investment)

No.	Name of goods	Code in the import tariff list			Symbols of specifications, description of technical features
No.	Name of goods	Heading	Sub-heading
1	Rice husk	1213	00	00
2	Bio safe	1515	19	00	In liquid form
3	Table salt (sodium chloride)	2501	00	10
4	Graphite powder	2504	10	00
5	Quartz	2506	10	00	In white powder
6	Bentonite for cast-in-place piles	2508	10	00	HPB600-API, in light yellow powder, of high viscosity, for use as a drilling mud for cast-in-place piles, petroleum exploration and exploitation
7	Bentonite for casting moulds	2508	10	00	In light yellow powder
8	Bentonite for drilling wells	2508	10	00	NPB600-H, in light yellow powder, of low viscosity, for use as a drilling mud for geological exploration and underground water exploitation
9	Soundproof- or heat- resistant materials of basalt	2508	40	90	In sheets
10	Marble powder	2517	41	00
11	Dolomite	2518			In gray and white powder
12	P300 cement	2523	29	10	For construction of marine projects
13	Thermal cement for drilling wells	2523	90	00
14	Class-G cement	2523	90	00
15	Mica	2525	20	00	In white, transparent flakes, of a size of between 16 and 100 mesh
16	Feldspar	2529	10	00	In white or light-yellow powder or granules
17	Condensate	2709	00	20
18	Crude oil	2709	00	10
19	Mogas 92 petrol	2710	12
20	Mogas 83 petrol	2710	12
21	Jet A1 petrol	2710	12
22	Industrial oils	2710	12		ISO(150EP, 32TL, 37TL, 46TL, 68TL, 100TL)
23	Lubricating grease	2710	19	44	Lithium grease (L2, L3, L4), Cana grease 1-13, MC70 grease
24	Lubricating oils	2710	19	43	SAE (30ART, 30GD, 40HDGM, 40GD, 50RT, 30RMX, 40RMX, 15W-40 RMX, 50RMX, 90TDEP, 140TDEP (GL5))
25	Hydraulic oils	2710	19	50	VIT32, VIT45, VIT68, VIT100, VIT220
26	DO oils	2710	19	71
27	FO oils	2710	19	79
28	Organic solvent, DMC buffer solution	2710	12		Light yellow liquid originated from mineral-oil, used as solvent to dissolve organic substances, and buffer solutions
29	DMC organic ingredients	2710	12		Light yellow liquid originated from mineral-oil, used as solvents, dispersal environment creating emulsion (in petroleum)
30	Propylene	2711	14
31	Natural gas	2711	21
32	Dry gas	2711	29	00
33	Bupro (propane-butane blend) LPG	2711
34	Hydrochloric acid	2806	10	00
35	Ammonia (NH3)	2814
36	Calcium chloride (CaCl₂)	2827	20	10	In white powder
37	Barite API	2833	27	00	In light beige powder
38	Bi-potassium alum	2833	30	00
39	Limestone (CaCO₃)	2836	50	00	In white powder or granules
40	Silicate Flour	2839	90	00	In light yellow powder
41	Bio safe DAK	2912			Form of viscous liquid, from light yellow to yellow (liquid mixture of aldehyde and essential oil)
42	Other chemical products from drilling	2931	90	90	Foaming substances, aluminum stearate, surface active substances
43	DMC - Lub	2942	00	00	In viscous form, dark-colored
44	Paints for drilling platforms and steel structures	3208	10	90
44	Paints for drilling platforms and steel structures	3209	90	00
45	Chemical paints of all kinds	3208			All kinds of paints for specific industrial decoration
45	Chemical paints of all kinds	3209
46	Solvents accompanying paints	3209	90	00	In light yellow powder
47	UF DAK glue	3506
48	DOP plasticizers	3812	20	00
49	PVC plastic powder	3904	10
50	Organic siliceous polymer (Silicon)	3910
51	Wooden boards, for chocking or lining on drilling platforms	4407	99
52	Labor protection devices (Clothes, shoes, boots, helmets, napkins and gloves)	4015	19	00
		6210
		6216	00	10
		6506	10
53	Casings and petroleum exploitation tubes made of threaded cast steel, a diameter of 2-3/8 to 20 inches	7304	22	00	cast steel tubes, threaded, thickness of 11-30mm, under API standard
		7304	23	00
		7304	24	00
		7304	29	00
54	steel tubes covered for anti-corrosion	7304			Steel tubes covered by FBE or 3LPE/PP spray method, covered tube size of 2-48 inches (1 inch = 2.54cm)
54	steel tubes covered for anti-corrosion	7305
55	steel tubes covered weighting concrete	7304			Steel tubes covered by high-pressure spray method (CWC), covered tube size of 2-48 inch (1 inch = 2.54cm); concrete with weight of 2400-3040kg/^m3
55	steel tubes covered weighting concrete	7305
56	Steel tubes covered for insulation	7304			Steel tubes covered by spray method, 5LPP and MLPP, covered tube size of 2-48 inch (1 inch = 2.54cm)
56	Steel tubes covered for insulation	7305
57	Steel tube used for oil or gas conduits, vertical countersunk welded by arc	7305	11	00	steel tube straightly welded, of a length of up to 12.2m, diameter of 16-60 inch (1 inch = 2.54cm), a thickness of 6.4-35mm, steel grade of up to X80 under API 5L standard
58	Steel casing welded accompanied with connection head, of a diameter of from 20 to 36 inches	7305	20	00	welded steel tubes accompanied with connection head
59	Threaded-welded steel casings and petroleum exploiting tubes, diameter of from 2-3/8 to 20 inches	7306	21	00	cast steel tube, threaded, thickness of from 11-30mm, under AP standard
59		7306	29	00
60	Accessories for connectors and bend connectors, of line type	7307	22		Of steel
60		7307	92		Of steel
61	Signboards on drilling rig	8310	00	00

ANNEX V

LIST OF RAW MATERIALS, SUPPLIES AND SEMI-FINISHED PRODUCTS FOR SHIPBUILDING WHICH CAN BE PRODUCED DOMESTICALLY
(Issued with Circular No.04/2012/TT-BKHDT of August 13, 2012, of the Ministry of Planning and Investment)

No.	Name of goods	Code in the import tariff list			Symbols of specifications, description of technical features
No.	Name of goods	Heading	Sub-heading
1	Wall panels	3925	90	00	BM25, BM50 (of fire protection level B-15)
2	Ceiling panels	3925	90	00	CC25, CC75 (of fire protection level B-0; B-15)
3	Fire doors	3925	90	00	B-15; A-0; A-60
4	Welding wires	8311	20		NAEH14 sized f2.4; f3.2; f4.0 mm
					NA71T-1 sized f1.0; f1.2; f1.6 mm
					NA71T-5 sized f1.0; f1.2; f1.6 mm
					NA71T-G sized f1.0; f1.2; f1.6 mm
					NA70S sized f0.8-f1.6 mm
5	Welding rods	8311	30		NT6013, NB6013, NA6013, NA7016, NA7018 with sizes f2.5; f3.25; f4.0; f5.0-f5.4 mm
6	Ship boilers	8402	12		Of a capacity of between 0.5 and 35 tons of steam/hour
7	River – sea ship shells	8906			Of up to 12,500 DWT

ANNEX VI

LIST OF RAW MATERIALS, SUPPLIES IN DIRECT SERVICE OF SOFTWARE MANUFACTURE WHICH CAN BE PRODUCED DOMESTICALLY
(Issued with Circular No.04/2012/TT-BKHDT of August 13, 2012, of the Ministry of Planning and Investment)

No.	Name of goods	Code in the import tariff list			Symbols of specifications, description of technical features
No.	Name of goods	Heading	Sub-heading
I	Paper-made packaging of software products
1.1	Paper-made packaging of software products	4817	30	00
1.2	Boxes and covers protecting objects carrying information	4819
1.3	Paper-made labels of electronic products	4911	99	90
2	Tools for inspection and evaluation/Algorithm
2.1	Source programs created by Vietnamese bodies, organizations and individuals may be used for re-integration or re-amendment upon separate request of the software producers, contained in:
2.1.1	- Disks used for the laser system for the purpose of reproducing phenomena other than sound and image	8523	41
2.1.2	- Disks used for the laser reading system of other kinds	8523	41
2.1.3	- Magnetic tapes used to reproduce phenomena other than sound or image	8523	29	19
2.1.4	- Other magnetic tapes of a width not exceeding 4 mm	8523	29	29
2.1.5	- Other magnetic tapes of a width not exceeding 6.5 mm	8523	29	39
2.1.6	- Other magnetic tapes of a width exceeding 6.5 mm	8523	29	59
2.1.7	- Other kinds used to reproduce phenomena other than sound and image	8523	29	92
2.1.8	- Others	8523	29	92
2.2	Lock disk/Programs preventing illegal reproduction produced by Viet Nam, contained in:
2.2.1	- Disks used for the laser system for the purpose of reproducing phenomena other than sound and image	8523	41
2.2.2	- Disks used for the laser reading system of other kinds	8523	41
2.2.3	- Magnetic tapes used to reproduce phenomena other than sound or image	8523	29	19
2.2.4	- Other magnetic tapes of a width not exceeding 4 mm	8523	29	29
2.2.5	- Other magnetic tapes of a width not exceeding 6.5 mm	8523	29	39
2.2.6	- Other magnetic tapes of a width exceeding 6.5 mm	8523	29	59
2.2.7	- Other kinds used to reproduce phenomena other than sound and image	8523	29	92
2.2.8	- Others	8523	29	92
2.3	Algorithm in technical -scientific problems made by Viet Nam and used in Vietnamese bodies and organizations (optimal control, identification, encoding, formulas, computer graphic processing, image and sound processing and so on), contained in:
2.3.1	- Disks used for the laser system for the purpose of reproducing phenomena other than sound and image	8523	40	12
2.3.2	- Disks used for the laser reading system of other kinds	8523	40	12
2.3.2	- Magnetic tapes used to reproduce phenomena other than sound or image	8523	29	19
2.3.3	- Other magnetic tapes of a width not exceeding 4 mm	8523	29	12
2.3.3	- Other magnetic tapes of a width not exceeding 6.5 mm	8523	29	22
2.3.4	- Other magnetic tapes of a width exceeding 6.5 mm	8523	29	39
2.3.4	- Other kinds used to reproduce phenomena other than sound and image	8523	29	92
2.3.5	- Others	8523	29	92
2.4	Algorithm in economic problems made by Viet Nam and used in Vietnamese bodies and organizations (planning, economic analysis and forecast, cost accounting and so on), contained in:
2.4.1	- Disks used for the laser system for the purpose of reproducing phenomena other than sound and image	8523	41
2.4.2	- Disks used for the laser reading system of other kinds	8523	41
2.4.3	- Magnetic tapes used to reproduce phenomena other than sound or image	8523	29	19
2.4.4	- Other magnetic tapes of a width not exceeding 4 mm	8523	29	29
2.4.5	- Other magnetic tapes of a width not exceeding 6.5 mm	8523	29	39
2.4.6	- Other magnetic tapes of a width exceeding 6.5 mm	8523	29	59
2.4.7	- Other kinds used to reproduce phenomena other than sound and image	8523	29	92
2.4.8	- Others	8523	29	92
2.5	Organization methods and algorithm made by Viet Nam in high figure processing problems in Vietnamese bodies and organizations (data processing for inspection, data processing for general inspection and so on), contained in:
2.5.1	- Disks used for the laser system for the purpose of reproducing phenomena other than sound and image	8523	41
2.5.2	- Disks used for the laser reading system of other kinds	8523	41
2.5.2	- Magnetic tapes used to reproduce phenomena other than sound or image	8523	29	19
2.5.3	- Other magnetic tapes of a width not exceeding 4 mm	8523	29	29
2.5.3	- Other magnetic tapes of a width not exceeding 6.5 mm	8523	29	39
2.5.4	- Other magnetic tapes of a width exceeding 6.5 mm	8523	29	59
2.5.4	- Other kinds used to reproduce phenomena other than sound and image	8523	29	92
2.5.5	- Others	8523	29	92
2.6	Algorithm and professional procedures made by Viet Nam in problems of management of humans, natural resources, land, supplies, stores and so on and used in Vietnamese bodies and organizations, contained in:
2.6.1	- Disks used for the laser system for the purpose of reproducing phenomena other than sound and image	8523	41
2.6.2	- Disks used for the laser reading system of other kinds	8523	41
2.6.3	- Magnetic tapes used to reproduce phenomena other than sound or image	8523	29	19
2.6.4	- Other magnetic tapes of a width not exceeding 4 mm	8523	29	29
2.6.5	- Other magnetic tapes of a width not exceeding 6.5 mm	8523	29	39
2.6.6	- Other magnetic tapes of a width exceeding 6.5 mm	8523	29	59
2.6.7	- Other kinds used to reproduce phenomena other than sound and image	8523	29	92
2.6.8	- Others	8523	29	92
2.7	Algorithm and professional procedures made by Viet Nam in problems falling into the cipher, security and national defence sectors of Viet Nam, contained in:
2.7.1	- Disks used for the laser system for the purpose of reproducing phenomena other than sound and image	8523	41
2.7.2	- Disks used for the laser reading system of other kinds	8523	41
2.7.2	- Magnetic tapes used to reproduce phenomena other than sound or image	8523	29	19
2.7.3	- Other magnetic tapes of a width not exceeding 4 mm	8523	29	29
2.7.3	- Other magnetic tapes of a width not exceeding 6.5 mm	8523	29	39
2.7.4	- Other magnetic tapes of a width exceeding 6.5 mm	8523	29	59
2.7.4	- Other kinds used to reproduce phenomena other than sound and image	8523	29	92
2.7.5	- Others	8523	29	92
2.8	Other algorithms and calculating methods made by Viet Nam and used in Vietnamese bodies and organizations, contained in:
2.8.1	- Disks used for the laser system for the purpose of reproducing phenomena other than sound and image	8523	41
2.8.2	- Disks used for the laser reading system of other kinds	8523	41
2.8.2	- Magnetic tapes used to reproduce phenomena other than sound or image	8523	29	19
2.8.3	- Other magnetic tapes of a width not exceeding 4 mm	8523	29	29
2.8.3	- Other magnetic tapes of a width not exceeding 6.5 mm	8523	29	39
2.8.4	- Other magnetic tapes of a width exceeding 6.5 mm	8523	29	59
2.8.4	- Other kinds used to reproduce phenomena other than sound and image	8523	29	92
2.8.5	- Others	8523	29	92
3	Assisting files
3.1.	Code tapes and standard classification checklists made by Viet Nam and to be commonly used in Viet Nam, contained in:
3.1.1	- Disks used for the laser system for the purpose of reproducing phenomena other than sound and image	8523	41
3.1.2	- Disks used for the laser reading system of other kinds	8523	41
3.1.3	- Magnetic tapes used to reproduce phenomena other than sound or image	8523	29	19
3.1.4	- Other magnetic tapes of a width not exceeding 4 mm	8523	29	29
3.1.5	- Other magnetic tapes of a width not exceeding 6.5 mm	8523	29	39
3.1.6	- Other magnetic tapes of a width exceeding 6.5 mm	8523	29	59
3.1.7	- Other kinds used to reproduce phenomena other than sound and image	8523	29	92
3.1.8	- Others	8523	29	92
3.2	Digitized graphic files made by Viet Nam (vector graphics and bitmap) relating to Vietnam country, contained in:
3.2.1	- Disks used for the laser system for the purpose of reproducing phenomena other than sound and image	8523	41
3.2.2	- Disks used for the laser reading system of other kinds	8523	41
3.2.2	- Magnetic tapes used to reproduce phenomena other than sound or image	8523	29	19
3.2.3	- Other magnetic tapes of a width not exceeding 4 mm	8523	29	29
3.2.3	- Other magnetic tapes of a width not exceeding 6.5 mm	8523	29	39
3.2.4	- Other magnetic tapes of a width exceeding 6.5 mm	8523	29	59
3.2.4	- Other kinds used to reproduce phenomena other than sound and image	8523	29	92
3.2.5	- Others	8523	29	92
3.3	Image library/photo collections/compressed scanned photo files made by Viet Nam contained in:
3.3.1	- Disks used for the laser reading system of other kinds	8523	41
3.3.2	- Other magnetic tapes of a width not exceeding 4 mm	8523	29	29
3.3.2	- Other magnetic tapes of a width not exceeding 6.5 mm	8523	29	39
3.3.3	- Other magnetic tapes of a width exceeding 6.5 mm	8523	29	59
3.3.3	- Others	8523	29	92

Đã xem:

Đánh giá:

Thuộc tính Văn bản pháp luật 04/2012/TT-BKH
Loại văn bản	Thông tư
Số hiệu	04/2012/TT-BKH
Cơ quan ban hành	Bộ Kế hoạch và Đầu tư
Người ký	Bùi Quang Vinh
Ngày ban hành	13/08/2012
Ngày hiệu lực	01/10/2012
Ngày công báo	...
Số công báo
Lĩnh vực	Đầu tư, Thương mại, Xuất nhập khẩu
Tình trạng hiệu lực	Hết hiệu lực 01/01/2016
Cập nhật	7 năm trước
Yêu cầu cập nhật văn bản này

Download Văn bản pháp luật 04/2012/TT-BKH

DOC

File văn bản word (2.1MB)

Lược đồ Circular No. 04/2012/TT-BKH promulgating a list of equipment, machinery spare

Văn bản bị sửa đổi, bổ sung

Văn bản liên quan ngôn ngữ

Thông tư 04/2012/TT-BKHĐT danh mục máy móc thiết bị phụ tùng thay thế

Văn bản sửa đổi, bổ sung

Văn bản bị đính chính

Văn bản được hướng dẫn

Văn bản đính chính

Văn bản bị thay thế

Circular No. 04/2009/TT-BKH of July 23, 2009, guiding the implementation of some

Văn bản hiện thời

Circular No. 04/2012/TT-BKH promulgating a list of equipment, machinery spare
Loại văn bản	Thông tư
Số hiệu	04/2012/TT-BKH
Cơ quan ban hành	Bộ Kế hoạch và Đầu tư
Người ký	Bùi Quang Vinh
Ngày ban hành	13/08/2012
Ngày hiệu lực	01/10/2012
Ngày công báo	...
Số công báo
Lĩnh vực	Đầu tư, Thương mại, Xuất nhập khẩu
Tình trạng hiệu lực	Hết hiệu lực 01/01/2016
Cập nhật	7 năm trước

Văn bản thay thế

Circular No. 14/2015/TT-BKHDT promulgating the lists of machinery equipment manufacturable domestically

Văn bản được dẫn chiếu

Văn bản hướng dẫn

Văn bản được hợp nhất

Văn bản được căn cứ

Văn bản hợp nhất

Nội dung Lược đồ Bản PDF Lịch sử VB liên quan

Thông tư 14/2015/TT-BKHDT

Circular No. 14/2015/TT-BKHDT dated 17 November 2015, on promulgating the lists of machinery, equipment, replacement parts, special-use transportation means, raw materials, materials, components and semi-finised products manufacturable domestically

Ban hành: 17/11/2015

Ngày hiệu lực: 01/01/2016

Hiệu lực: Hết hiệu lực

Ngày hết hiệu lực: 15/05/2018

Cập nhật: 4 năm trước

Nội dung Lược đồ Lịch sử VB liên quan

Văn bản gốc Circular No. 04/2012/TT-BKH promulgating a list of equipment, machinery spare

Lịch sử hiệu lực Circular No. 04/2012/TT-BKH promulgating a list of equipment, machinery spare

13/08/2012
Văn bản được ban hành
Trạng thái: Chưa có hiệu lực
01/10/2012
Văn bản có hiệu lực
Trạng thái: Có hiệu lực
01/01/2016
Được thay thế
Được thay thế bởi Circular No. 14/2015/TT-BKHDT promulgating the lists of machinery equipment manufacturable domestically

Thông tư 04/2012/TT-BKH

Circular No. 04/2012/TT-BKH of August 13, 2012, promulgating a list of equipment, machinery, spare parts and special-use vehicles, raw materials, supplies and semi-finished products which can be produced at home

Nội dung toàn văn Circular No. 04/2012/TT-BKH promulgating a list of equipment, machinery spare

Na12[(AlO2)12.(SiO2)12].27H2O used as materials to manufacture washing powder, replacing for STPP (Sodium Tripoli Phosphate)

Coconut shell charcoal (sintered charcoal)

Thuộc tính Văn bản pháp luật 04/2012/TT-BKH

Download Văn bản pháp luật 04/2012/TT-BKH