Nội dung toàn văn Circular No. 55/2015/TT-BCT incentive certification verification of projects for manufacturing
MINISTRY OF INDUSTRY AND TRADE | SOCIALIST REPUBLIC OF VIETNAM |
No. 55/2015/TT-BCT | Hanoi, December 30, 2015 |
CIRCULAR
REGULATION ON PROCEDURES FOR INCENTIVE CERTIFICATION AND VERIFICATION OF PROJECTS FOR MANUFACTURING OF SUPPORTING PRODUCTS ON THE LIST OF PRIORITIZED SUPPORTING PRODUCTS
Pursuant to the Decree No. 95/2011/ND-CP on functions, responsibilities, power and organizational structure of The Ministry of Industry and Trade dated November 12, 2012 of the Government.
Pursuant to the Law No. 71/2014/QH13 amending and supplementing a number of articles of the Law on Taxation;
Pursuant to the Decree No. 111/2015/ND-CP on development of supporting industry dated November 11, 2015 of the Government.
At the request of the Director of the Department of Heavy Industry.
The Minister of Industry and Trade issues this Circular regulating procedures for incentive certification and verification of projects for manufacturing of supporting products on the list of prioritized supporting products.
Chapter I
GENERAL PROVISIONS
Article 1. Scope
This Circular regulates procedures for incentive certification and verification of projects for manufacturing of supporting products (hereinafter referred to as the project) on the list of supporting products promulgated in the Decree No. 111/2015/ND-CP on development of supporting industry dated November 03, 2015 of the Government.
Article 2. Regulated entities
This Circular applies to entities that manufacture supporting products on the list of supporting products given priority in Vietnam (hereinafter referred to as the List).
Article 3. Interpretation of terms
For the purpose of this Circular, terms below are construed as follows:
1. Supporting products mean products in the industries of materials, accessories, components and spare parts used for finished goods.
2. A competent authority means the agency taking charge of receipt and processing of incentive certification applications:
a) The competent authority of the Ministry of Industry and Trade: the Department of Heavy Industry;
b) Competent authorities of provinces: regulatory authorities appointed by People's Committees of provinces under Article 15 of Decree No. 111/ND- CP on development of supporting industry dated November 03, 2015.
3. A new investment project for manufacturing of supporting products means:
a) Every first-time investment project or project that comes into operation independently of the existing project (hereinafter referred to as an independent project);
b) Every existing project that is entitled to scope expansion, capacity enhancement, technological innovation in manufacture of supporting products using new devices and manufacturing processes with an increase in productivity by at least 20%.
4. Small and medium-sized enterprises (SMEs) mean every enterprise defined by laws on SMEs.
Article 4. Projects eligible for enterprise income tax incentives
Every new investment project that is eligible for enterprise income tax incentives under regulations of laws No. 71/2014/QH13 amending and supplementing a number of articles of the Law on taxation dated November 23, 2014 shall manufacture supporting products that satisfy one of the following requirements:
a) The list of supporting products given priority in Vietnam that are manufactured before January 01, 2015 (Appendix 1 hereof) and granted a Certificate of Conformity to EU technical Regulations (standards promulgated by CEN - European Committee for Standardization) or equivalents (if any);
b) All supporting products on the List compiled on the Decree No. 111/2015/ND-CP on development of supporting industry dated November 03, 2015 of the Government but not included in Appendix 01 of this Circular.
Chapter II
PROCEDURES FOR INCENTIVE CERTIFICATION AND VERIFICATION
Article 5. Applications for procedures for incentive certification
1. The number of applications:
a) 06 copies: 01 original and 05 duplicates;
b) The application shall be sealed and the applicant's information shall be specified on the file folder;
c) Where changes in the project that affect the conditions for investment incentives, the applicant shall submit the competent authority an additional application in which the scope of changes includes.
2. Documents requested in an application:
a) A written request for incentive certification (Appendix 2 hereof);
b) A Certificate of Enterprise Registration or Certificate of Business Registration;
c) A description of the project:
- With respect to a first time project or an independent project: a proposal for project investment under the current regulations of laws on investment and construction;
- With respect to an existing project:
+ A description of current status of its manufacturing process, facilities (plants), machines and equipment ( a list of machines and its capacity, specialized equipment; measuring and quality control devices); the project’s capacity; the latest annual internal audit report (or an annual financial statement);
+ A description of investment in scope expansion, technical innovation using new devices and manufacturing processes with an increase in productivity by at least 20% under the current regulations of laws on investment and construction.
d) The decision on approval for environmental impact assessment (if new investment projects) or a commitment to environmental protection under the law on environmental protection or an as-built certificate, and environmental protective measures (if existing projects).
dd) A Certificate of conformity to EU technical regulations (standards promulgated by CEN - European Committee for Standardization) or the equivalent (if any) granted by certifying agencies that are permitted to exercise certification activities under regulations of laws on product quality;
3. Application recipients:
a) Every SME shall submit their application for the project for manufacturing of supporting products on the List to the competent authority where the project is located or the Ministry of Industry and Trade. Each SME must submit its application to only one competent authority;
b) Other types of businesses shall submit their applications to the Ministry of Industry and Trade (address: 54 Hai Ba Trung street, Hoan Kiem district, Hanoi).
4. Options for application submission:
Directly or online.
Article 6. Scope of project appraisal
1. The observance of regulations of the Decree No. 111/2015/ND-CP on development of supporting industry dated November 11, 2015 of the Government.
2. Legal proceedings
3. Project feasibility and rationality of technological-technical solutions that apply to the project.
4. Financial ability, and the effectiveness of the project.
5. The viability of the environmental protective measures.
Article 7. Power to certify incentive
1. The competent authority of a local government where the project is located or the Ministry of Industry and Trade shall carry out the incentive certification of such project of SMEs.
2. The Ministry of Industry and Trade shall carry out the incentive certification of projects for manufacturing of supporting products that are invested by other type of businesses.
Article 8. Time limit for certification
1. Within 05 working days, the competent authority shall examine the validity and completion of the application. In case of an incomplete or invalid application, the competent authority shall request the applicant to supplement his/her application in writing.
2. For a complete and valid application, within 15 working days, the competent authority shall appraise such application or carry out a site inspection, if necessary. The competent authority shall send a notification of the result of incentive certification to the applicant within 30 working days.
Article 9. Verification and withdrawal of certificates of incentives
1. Procedures for verification:
a) Inspecting authorities:
- The Ministry of Industry and Trade shall take charge of and cooperate with relevant Ministries, Departments and agencies to carry out inspections of projects under incentives nationwide
- The Ministries of Industry and Trade of provinces shall take charge of and cooperate with relevant Ministries, Departments and agencies to inspect projects that benefit from incentives within their provinces
b) Methods of inspection:
Surprise inspection or periodic inspection, conducted by the Ministry of Industry and Trade or Department of Industry and Trade at requests of the State management authority.
c) Scope of inspection
- Legal documentary inspection;
- Facility inspection;
- Inspection of incentives from which the project benefits
- Project progress inspection;
- Inspection of supporting products of the project eligible for incentives.
The inspection shall be made in record. Any violations found shall be reported to the competent authority by the Inspectorate.
2. Withdrawal of the certificate of incentives:
The certificate of incentives shall be withdrawn and the defaulting entity shall compensate for the granted incentives in the following cases:
a)The investor does not report changes in supporting products under incentives to the competent authority;
b) After 18 months from the date of incentive certification, there are no supporting products mentioned on the application for incentive certification;
c) Any case is petitioned by the inspectorate.
Chapter III
RESPONSIBILITIES AND IMPLEMENTATION
Article 10. Responsibilities of entities
Every entity benefited from incentives shall submit an annual report on the manufacture and trade in supporting products under incentives
Article 11. Responsibilities of State regulatory authorities
1. The Department of Heavy Industry shall:
a) Process applications and consult with Ministries, departments and relevant authorities (if any) on verification;
b) Inspect and instruct entities that manufacture supporting products on the list in the implementation of this Circular and relevant laws on manufacturing of supporting products.
c) Take charge of and cooperate with relevant Ministries, departments and agencies to carry out surprise and periodic inspections of projects provided with incentives.
2. The competent authority of local government where the project is located shall take charge of and cooperate with units under provinces to:
a) Process applications and consult with relevant departments onverification ;
b) Inspect and instruct entities that manufacture supporting products on the list in the implementation of this Circular and relevant laws on manufacturing of supporting products.
c)Submit one original of the certificate of incentives to the Department of Heavy Industry – Ministry of Industry and Trade and 01 duplicate to the Department of Industry and Trade (if the Department of Industry and Trade is not the competent authority of local government where incentives are certified).
d) Annually submit an report aggregate report on projects eligible for incentive certification to the Department of Heavy Industry –Ministry of Industry and Trade .
3. The Departments of Industry and Trade of provinces shall take charge of and cooperate with relevant Ministries, Departments and agencies to carry out surprise or periodic inspection of projects that benefit from incentives within their provinces
Article 12. ENTRY INTO FORCE
1. This Circular comes into effect from January 01. 2016.
2. Any issues or concerns arising during the implementation of this Circular shall be promptly reported to the Ministry of Industry and Trade.
| MINISTER |
APPENDIX 1
THE LIST OF PRIORITIZED SUPPORTING PRODUCTS DOMESTICALLY MANUFACTURED BEFORE JANUARY 01, 2015
(Promulgated together with the Circular No. 55/2015/TT-BCT dated December 30, 2015 of the Ministry of Industry and Trade)
I. TEXTILE INDUSTRY
No. | Priority products | Home products | ||||
Name of product | HS Code | Description of product | ||||
1 | Synthetic fibres : PE, Viscose | Polyester PSF fibre | 5503 | 20 | 00 |
|
2 | Knitted and woven yarn, high tenacity polyester yarn | yarn | 5205 |
|
| Including those of HS codes: |
yarn | 5404 |
|
| Including those of HS codes: | ||
Polyester filament yarn | 5402 | 33 | 00 |
| ||
yarn | 5509 |
|
| Including those of HS codes: | ||
yarn | 5510 |
|
| Including those of HS codes: | ||
3 | Fabrics: technical fabrics, non-woven fabrics, knitted and woven fabrics | Woven fabrics of cotton, containing 85% or more by weight of cotton, weighing not more than 200 g/m2 | 5208 |
|
| Including codes: |
Jean fabrics | 5209 | 22 | 00 | Fabrics of 100% cotton, cotton polyester, cotton polyester pandex...containing from 7 to 15 OZ, abb of 55 inches to 63 inches, yarn properties of from 02 to 16 Ne | ||
Woven fabrics of cotton, containing 85% or more by weight of cotton, weighing not more than 200 g/m2 | 5209 |
|
| Including those of HS codes: | ||
Kate | 5210 | 11 | 00 |
| ||
Other woven of cotton | 5212 |
|
| Including those of HS codes: | ||
Woven fabrics of polymer | 5407 | 72 | 00 |
| ||
Woven fabrics of synthetic staple fibres, containing less than 85% by weight of such fibres, mixed mainly or solely with cotton, of a weight not exceeding 170 g/m2 | 5513 |
|
| Including those of HS codes: | ||
Woven fabrics of synthetic staple fibres, containing less than 85% by weight of such fibres, mixed mainly or solely with cotton, of a weight exceeding 170 g/m2 | 5514 |
|
| Including those of HS codes: | ||
Other woven fabrics of synthetic staple fibres, mixed mainly or solely with Visco rayon | 5515 | 11 | 00 | Twill fabrics, plain weave, dyed | ||
Other woven fabrics of synthetic staple fibres, mixed mainly or solely with wool or fine animal hair | 5515 | 13 | 00 | twill fabrics, plain weave for clothes | ||
Other woven fabrics of synthetic staple fibres, mixed mainly or solely with Visco rayon Decree wool | 5515 | 19 | 00 | twill fabrics, plain weave for assemblies | ||
Prepared canvas | 5901 | 90 | 20 |
| ||
stiffened textile fabrics | 5901 | 90 | 90 |
| ||
Fabrics ortherwise impregnated, coated or covered | 5907 | 0 | 90 | Textile fabrics with waterproof coatings | ||
Knitted fabrics of cotton | 6006 | 22 | 00 | Dyed | ||
4 | Sewing thread | Sewing thread made of coir yarn | 5308 | 10 | 00 | Tangled thread, smooth thread |
Sewing thread of synthetic staple fibres | 5508 |
|
|
| ||
5 | Accessories: buttons ,mex,zippers, rubber bands | Textile labels | 5807 | 10 | 00 |
|
II. FOOTWEAR - LEATHER INDUSTRY:
No. | Priority products | Home products | ||||
Name of product | HS Code | Description of product | ||||
1 | soles, shoelaces, toe-caps | Shoelaces of cotton and polyester | 5609 |
|
|
|
Uppers and parts of thereof, other than stiffeners | 6406 | 10 |
|
| ||
Parts of footwear (including uppers whether or not attached to soles other than outer soles), removable in-soles, heel cushions and similar articles; gaiters, leggings and similar articles, and parts | 6406 |
|
|
| ||
III. ELECTRONICS:
No. | Priority products | Home products | ||||
Name of product | HS Code | Description of product | ||||
1 | Basic electronics –optoelectronics components; transistors, integrated circuits, sensors , resistors , capacitors , diodes , antennas , thyristor | Components, spare parts of transmissions | 8529 | 10 | 40 | Used for radio and television: splitter, adders, Filters, channel adders |
Aluminum electrolytic capacitors | 8532 | 22 | 00 | Electrical Capacitors, fixed, variable or adjustable, (pre-set) | ||
Ceramic capacitors | 8532 | 24 | 00 | Electrical Capacitors, fixed, variable or adjustable, (pre-set) | ||
plastics capacitors | 8532 | 29 | 00 | Electrical Capacitors, fixed, variable or adjustable, (pre-set) | ||
Printed circuit boards | 8534 | 0 | 10 | Printed circuits | ||
RF connectors | 8536 | 69 | 19 | I/O connectors | ||
FPC connectors of mobile phones | 8536 | 69 | 19 |
| ||
Diodes, other than photosentive or light emitting diodes | 8541 | 10 | 00 |
| ||
Semiconductor lamp bulbs, other than photosentive lamp bulbs | 8541 | 21 | 00 |
| ||
Thyristors, diacs and triacs, other than photosentive devices | 8541 | 30 | 00 |
| ||
Electronic integrated circuits | 8542 |
|
|
| ||
2 | Wires, cables, headphones and speakers | Flat magnet wire | 7408 | 11 | 00 | Cross-sectional dimension not exceeding 50 mm2 |
Bare copper cables | 7413 |
|
|
| ||
electronic cables | 8544 | 42 | 99 |
| ||
Optical fibre cables | 8544 | 70 |
| TCVN 8665:2011 (transmission by optical technology including telephone, telegraph and radio relay cables, submarine) | ||
telephone, telegraph and radio relay cables, submarine) | 8544 | 42 | 11 | Of a kind used for telecommunications, for a voltage not exceeding 80V | ||
Electric cables wrapped with plastics, cross-sectional dimension not exceeding 300 mm2 | 8544 | 42 | 19 | Of a kind used for telecommunications, for a voltage not exceeding 80V | ||
telephone, telegraph and radio relay cables) | 8544 | 42 | 19 | Of a kind used for telecommunications, for a voltage not exceeding 80V | ||
telephone, telegraph and radio relay cables, submarine) | 8544 | 42 | 20 | Of a kind used for telecommunications, for a voltage exceeding 80V but not exceeding 1,000V | ||
Cables, insulated with plastics, cross-sectional dimension not exceeding 300 mm2 | 8544 | 42 | 90 | Of a kind used for telecommunications, for a voltage exceeding 80V but not exceeding 1,000V | ||
Electric conductors, insulated with plastics | 8544 | 42 | 90 | Of a kind used for telecommunications, for a voltage exceeding 80V but not exceeding 1,000V | ||
telephone, telegraph and radio relay cables, submarine) | 8544 | 49 | 11 | Of a kind used for telecommunications, for a voltage not exceeding 80V | ||
telephone, telegraph and radio relay cables | 8544 | 49 | 19 | Of a kind used for telecommunications, for a voltage not exceeding 80V | ||
telephone, telegraph and radio relay cables, submarine | 8544 | 49 | 31 | Of a kind used for telecommunications, for a voltage exceeding 80V but not exceeding 1,000V | ||
telephone, telegraph and radio relay cables | 8544 | 49 | 39 | Of a kind used for telecommunications, for a voltage exceeding 80V but not exceeding 1,000V | ||
Control cables | 8708 | 29 | 12 |
| ||
Optical fibres, optical fibre bundles and optical cables | 9001 | 10 | 10 | Of a kind used for telecommunications, other electricity | ||
Headphones | 8518 | 30 | 10 |
| ||
Earphones | 8518 | 30 | 20 |
| ||
Box speakers | 8518 | 21 | 10 | And HS Code of 85182210 | ||
Single loudspeakers mounted in theirs enclosures | 8518 | 21 |
|
| ||
Multiple loudspeakers, mounted in the same enclosure | 8518 | 22 |
|
| ||
Loudspeakers, without enclosure | 8518 | 29 | 20 | Having a frequency range of 300Hz to 3,400 Hz, with a diameter not exceeding 50 mm, for telecommunication use | ||
3 | Monitors, of all types | Cathode-ray tube monitor | 8528 | 41 |
| Or HS Code of 852849 |
IV. AUTOMOBILE INDUSTRY:
No. | Priority products | Home products | ||||
Name of product | HS Code | Description | ||||
1 | Frame – hull – door: punch –late-shaped components, trunk, chassis, doors, doorstep
| Aluminum illuminated signs | 9405 | 60 | 90 | Used for motorbikes, automobiles Decree traffic signs |
Labels | 3919 | 90 | 90 |
| ||
Bumpers and parts thereof | 8708 | 10 | 90 |
| ||
Front floor frames | 8708 | 29 | 95 |
| ||
central floor frames | 8708 | 29 | 95 |
| ||
front floor frames- left | 8708 | 29 | 95 |
| ||
Front floor frames - right | 8708 | 29 | 95 |
| ||
Rear floor frame | 8708 | 29 | 95 |
| ||
Front floor frame -central | 8708 | 29 | 95 |
| ||
Outer floor frames - left | 8708 | 29 | 95 |
| ||
Outer floor -right | 8708 | 29 | 95 |
| ||
A-pillars | 8708 | 29 | 95 |
| ||
B-pillars | 8708 | 29 | 95 |
| ||
C-pillars | 8708 | 29 | 95 |
| ||
D-pillars | 8708 | 29 | 95 |
| ||
Tableau stiffeners | 8708 | 29 | 95 |
| ||
Non-welded hull of CKD (completely knocked down) | 8708 | 29 | 93 |
| ||
Welded cabs | 8707 | 90 | 90 | Vehicle weight not exceeding 20 tons | ||
CKD cabs | 8708 | 29 | 99 | Vehicle weight not exceeding 20 tons | ||
Chassis | 8708 | 99 | 90 | Truck weight not exceeding 20 tons | ||
Chassis | 8708 | 99 | 62 |
| ||
2 | Suspension system: Tweezers, springs, dampers | Leaf springs and springs | 7320 | 10 | 11 | DIN2094:2006 |
Spiral torsion springs | 7320 | 20 | 00 | Used for automobiles, machines… Thickness of from 8 – 30 mm, arbor diameter of from 50- 300mm | ||
spring ball | 8483 | 30 | 30 | used for vehicles whose weight of at least 1.25 ton | ||
Accessory balls | 8483 | 40 | 00 | Used for gears and gearing, other than toothed wheels, chain sprockets and other transmission elements presented separately; ball or roller screws; gear boxes and other speed changers, including torque converters | ||
Balanced balls | 8483 | 99 | 93 | Used for trucks from 8-70 tons of weight | ||
springs | 8708 | 99 | 93 | Used for trucks from 8-70 tons of weight For passenger buses or buses of from 12-80 seats For car of from 1-9 seats Spring width: 40 -150 mm Spring thickness: 5- 45 mm | ||
3 | Wheels: Tyres, aluminum rims | Typres, used for heavy trucks | 4011 | 20 |
| Vehicle weight of 1,750 kg to 5,525 kg; outer diameter of from 880 mm to 1,230 mm |
typres of specialized cars | 4011 |
|
| Vehicle weight of 2,937 kg to 6,150 kg; outer diameter of from 1,220 mm to 3,045 mm | ||
Typres of light trucks | 4011 |
|
| Vehicle weight of 410kg to 3,050 kg; outer diameter of from 475 mm to 972 mm | ||
Inner tubes of light trucks | 4013 | 10 |
| Vehicle weight of 104 mm to 160 mm kg; inner diameter of from 305 mm to 385 mm | ||
rims | 8708 | 70 | 32 |
| ||
4 | Transmission system: clutches, gearboxes, axles, propeller shafts | gearboxes | 8708 | 40 |
| HS14, HS19, GT10, GT2, HDC |
Transmission tubes | 8708 | 40 | 92 | Used for lubricating gearboxes | ||
Components of clutches | 8714 | 93 | 10 |
| ||
Gears | 8714 | 93 | 90 |
| ||
Transmission tubes | 7326 | 90 | 99 | Used for lubricating gearboxes | ||
Rolling bars<> | 7616 | 99 | 99 | Used for gearboxes | ||
Cylinder liners | 8409 | 99 | 44 | Used for lubricating gearboxes | ||
5 | Braking systems | Brake fluid tubes | 8708 | 30 | 29 |
|
Accelerators, brake or clutch pedals | 8708 | 99 | 30 |
| ||
6 | Power suppliers: electric accumulators, generators | Lead-acid electric accumulators | 8507 | 20 | 99 | Of a kind used for lubricating piston engines |
Lead-acid terminals | 8507 |
|
| Of a kind used for bucket trucks using electric engines: capacity of from 2V-100Ah to 2V-1000Ah | ||
Wires, connectors, fuses, sensors auto control devices, processing systems | Control cables | 8708 | 29 | 12 |
| |
Aerials, of a kind used for cars | 8529 | 10 | 30 |
| ||
Electric conductors | 8544 | 30 | 12 |
| ||
7 | Lightening system and signals Lamps, horns, gauges of all types | Headlights, of cars | 8512 | 20 | 10 |
|
Headlights, used for truck not exceeding 1 ton by weight | 8512 | 20 | 99 |
| ||
horns | 8512 | 30 | 10 |
| ||
Loudspeakers | 8518 | 21 |
| Or HS Code of 851829 | ||
Horn amplifier | 8518 | 50 |
|
| ||
8 | automobile exhaust systems | Exhaust pipes | 8708 | 92 | 20 |
|
9 | Plastics components | articles of plastics | 3917 | 29 | 00 | Furniture and outdoor furniture |
10 | Components of rubber, dampers | Pipes and hoses, of rubber | 4009 | 42 | 90 |
|
Gaskets | 4016 | 93 | 20 |
| ||
Other articles of plastics | 4016 | 99 | 14 |
| ||
Airbag clothes | 5911 | 90 | 90 |
| ||
11 | Windshields, wiper blades, seats | Other articles of leather of cars | 4205 | 0 | 40 |
|
safety glass, tempered | 7007 |
|
| A kind of toughened glass ( bearing, spring resistance of 5-8 times higher, thermal resistance of 3 times higher) | ||
Windshields, including front, rear and side windshields | 7007 |
|
| QCVN | ||
Rear-view mirrors | 7009 |
|
|
| ||
Windscreen wipers for vehicles | 8512 | 90 | 20 |
| ||
Parts of safety seat belts | 8708 | 29 | 20 |
| ||
Clothing of seats | 9401 | 90 | 10 |
| ||
Seat plate | 9401 | 90 | 39 |
| ||
Sets of seats | 9401 | 20 |
|
| ||
Seats of passengers | 9401 | 20 | 10 | A kind of used for vehicles | ||
V. MECHANERY ENGINEERING:
No. | Priority products | Home products |
| ||||||||
Name of product | HS Code | Description |
| ||||||||
1 | Components and accessories of shipping building, agricultural machines and driving machines | Typres for agricultural vehicles | 4011 | 61 | 10 |
|
| ||||
Typres for industrial vehicles | 4011 | 62 | 10 |
|
| ||||||
Tubeless types | 4011 | 69 | 00 |
|
| ||||||
Inner tubes for industrial vehicles | 4013 | 90 | 99 |
|
| ||||||
single-phase electric motors(watertight) | 8501 | 10 |
| Of an output of up to 2.2 kW, asynchronous capacitor motors, short-circuit rotors |
| ||||||
three-phase electric motors(watertight) | 8501 |
|
| Of an output of up to 1,000 kW, asynchronous capacitor motors, short-circuit rotors of from 750 vg/ph to 3,000 vg/ph | |||||||
Shipping building: | |||||||||||
wall plates | 3925 | 90 | 00 | BM25, BM50 ( flameproof of B-15) | |||||||
Ceiling plates | 3925 | 90 | 00 | CC25, CC75 ( flameproof of B-0; B-15) | |||||||
Boat or dock fenders | 4016 | 94 | 00 |
| |||||||
Boat chains | 7315 | 82 | 00 | Studlink anchor chains with diameter of 13-36 mm | |||||||
Cored wire | 8311 |
|
| of NAEH14, | |||||||
of NA71T-1, | |||||||||||
of NA71T-5, | |||||||||||
of NA71T-G, | |||||||||||
of NA70S, | |||||||||||
Cored rods | 8311 |
|
| Of NT6013, NB6013, NA6013, NA7016, NA7018 | |||||||
Marine boilers | 8402 | 12 |
| Steam production of from 0.5 -35 tons per hour | |||||||
|
| Diesel engines | 8408 |
|
| Of a power up to 50 Hp | |||||
Shafts and propellers | 8410 | 90 | 00 | Propeller diameter up to 2 m | |||||||
Ships’ derricks | 8426 | 11 | 00 | Lifting capacity up to 540 tons | |||||||
Gearbox clutches for marine vessels | 8483 | 40 | 20 | With diesel engines | |||||||
Floating docks | 8905 | 90 | 10 | Lifting capacity up to 20.000 tons | |||||||
Sheathing of jolly-boats, made of aluminum alloy | 8906 |
|
|
| |||||||
Sheathing of ships | 8906 |
|
| up to 12.500 tons | |||||||
high quality composites | 7019 | 90 | 90 | Made of prepreg fabrics of E-glass fibre for ship building | |||||||
2 | machine components: high-strength bolts, high tensile fasteners, ball bearings , lining fabrics, valves, joints, punch plates, variable speed boxes, hydraulic cylinders | Ball rings | 8482 | 80 | 00 | types of 24k and 30k | |||||
Balls, couplings, of cooper | 7411 | 22 | 00 | Up to Ø 1.500 mm | |||||||
High-temperature solenoid valves | 8417 | 10 | 00 | For rotationary furnaces | |||||||
Panel mounted solenoid valves | 8417 | 10 | 00 | For rotationary furnaces | |||||||
valves, of all types | 8481 | 20 | 90 |
| |||||||
Valves, of copper | 8481 | 30 | 20 |
| |||||||
Check valves | 8481 | 30 | 20 | Maximum capacity: 16 kg/ cm2 , temperature of up to 1200c | |||||||
Gate valves, of copper | 8481 | 80 | 61 | Maximum capacity: 16 kg/ cm2 , temperature of up to 1200c | |||||||
Ball valves, of copper | 8481 | 80 | 63 | Maximum capacity: 16 kg/ cm2 , temperature of up to 1200c | |||||||
Ball valves, of copper alloy | 8481 | 80 | 63 | Maximum capacity: 16 kg/ cm2 , temperature of up to 1200c | |||||||
Angle valves, of copper | 8481 | 80 | 63 | Maximum capacity: 16 kg/ cm2 , temperature of up to 1200c | |||||||
Angle valves, of copper alloy | 8481 | 80 | 63 | Maximum capacity: 16 kg/ cm2 , temperature of up to 1200c | |||||||
Check valves, pumpers for pipeline elbows and auxiliary equipment of water cooling system for boilers | 8481 | 80 | 99 |
| |||||||
Parts of valves | 8481 | 90 | 29 |
| |||||||
Parts of couplings, elbows, fittings, with a diameter of | 7307 | 22 |
| Of steel | |||||||
Parts of couplings, elbows, fittings, with a diameter of | 7307 | 92 |
| Of steel | |||||||
| Fabricated steel | Flat-rolled products of other alloy steel, of a width of 60 mm or more | 7225 | 30 | 90 | Manufacturing in 2016 | |||||
Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel | 7227 | 90 | 0 | Manufacturing in 2016 | |||||||
Alloy steel, shaped | 7228 | 70 | 90 | SS400, SS540 from L80 to L130; Q235 from C80 to C180 | |||||||
inches to 36 inches VI. SUPPORTING PRODUCTS FOR HI-TECH INDUSTRIES
No. | Priority products | Home products | ||||
Name of product | HS Code | Description | ||||
1 | Types of electronic components , electronic circuits used for creating equipment : Peripheral equipment , computers , electronic appliances, audiovisual equipment , solar cells ; microprocessors ; controllers (programmable logic controllers PLC , CNC , ... ) | Solar panel module | 8541 | 40 | 22 | Used for absorbing solar energy and convert it into electricity |
Optical disk drives | 8471 | 70 | 40 | Including CD-ROM, DVD and CD-R drives | ||
2 | New generation engines: electric motors, , magnetic motors, servo motors, reluctance motors, linear motors | Vibration motors, a kind of use for mobile phones | 8501 | 10 | 60 |
|
Brushes electric motors | 8501 | 10 | 91 | Types of QK1-5868-000A, S8-71961, S8-71957, S8- 71958, S8-71969, S8-71983, SS8-71974, a kind of use for printers | ||
This appendix is compiled according to current lists of machineries, equipment, materials and accessories, etc. that have been manufactured by January 01, 2015 of competent Ministries and Departments. Any suplementation shall be considered adding to this Appendix by the Ministry of Industry and Trade, and other relevant Ministries and Departments.
