827/2006/QD-BKH đã được thay thế bởi Circular No. 04/2009/TT-BKH of July 23, 2009, guiding the implementation of some và được áp dụng kể từ ngày 27/08/2009.
Nội dung toàn văn 827/2006/QD-BKH
THE MINISTRY OF PLANNING AND INVESTMENT | SOCIALIST REPUBLIC OF VIET NAM |
No. 827/2006/QD-BKH | Hanoi, August 15, 2006 |
DECISION
PROMULGATING THE LIST OF EQUIPMENT, MACHINERY, SPARE PARTS AND SPECIAL-USE MEANS OF TRANSPORT, WHICH CAN BE PRODUCED AT HOME; THE LIST OF CONSTRUCTION MATERIALS, WHICH CAN BE PRODUCED AT HOME; THE LIST OF SUPPLIES NECESSARY FOR PETROLEUM ACTIVITIES, WHICH CAN BE PRODUCED AT HOME; THE LIST OF RAW MATERIALS, MATERIALS, SUPPLIES AND SEMI-FINISHED PRODUCTS IN SERVICE OF SHIPBUILDING INDUSTRY, WHICH CAN BE PRODUCED AT HOME; AND THE LIST OF RAW MATERIALS, MATERIALS, SUPPLIES AND SEMI-FINISHED PRODUCTS, WHICH CAN BE PRODUCED AT HOME
THE MINISTER OF PLANNING AND INVESTMENT
Pursuant to the Government’s Decree No. 61/2003/ND-CP of June 6, 2003, defining the functions, tasks, powers and organizational structure of the Planning and Investment Ministry;
Pursuant to the Government’s Decree No. 158/2003/ND-CP of December 10, 2003, detailing the implementation of the Value Added Tax (VAT) Law and the Law Amending and Supplementing a Number of Articles of the VAT Law;
Pursuant to the Government’s Decree No. 149/2005/ND-CP of December 8, 2005, detailing the implementation of the Law on Import Tax and Export Tax;
At the proposal of the concerned ministries and branches,
DECIDES:
Article 1.- To promulgate together with this Decision:
- The list of equipment, machinery, spare parts and special-use means of transport, which can be produced at home, to serve as a basis for VAT exemption according to the provisions of Section 4, Article 4 of the Government’s Decree No. 158/2003/ND-CP of December 10, 2003, detailing the implementation of the VAT Law and the Law Amending and Supplementing a Number of Articles of the VAT Law.
- The list of construction materials, which can be produced at home, to serve as a basis for VAT exemption according to the provisions of Section 4, Article 4 of the Government’s Decree No. 158/2003/ND-CP of December 10, 2003, detailing the implementation of the VAT Law and the Law Amending and Supplementing a Number of Articles of the VAT Law; and import tax exemption according to the provisions of Item e, Section 6, Article 16 of Decree No. 149/2005/ND-CP of December 8, 2005, detailing the implementation of the Law on Import Tax and Export Tax.
- The list of supplies necessary for petroleum activities, which can be produced at home, to serve as a basis for the import tax exemption according to the provisions of Item b, Section 6, Article 16 of Decree No. 149/2005/ND-CP of December 8, 2005, detailing the implementation of the Law on Import Tax and Export Tax.
- The list of raw materials, materials, supplies and semi-finished products in service of shipbuilding industry, which can be produced at home, to serve as a basis for import tax exemption according to the provisions of Section 16, Article 16 of Decree No. 149/2005/ND-CP of December 8, 2005, detailing the implementation of the Law on Import Tax and Export Tax.
- The list of raw materials, materials, supplies and semi-finished products, which can be produced at home, to serve as a basis for import tax exemption according to the provisions of Section 16, Article 16 of Decree No. 149/2005/ND-CP of December 8, 2005, detailing the implementation of the Law on Import Tax and Export Tax.
Article 2.- In the course of using the lists, if customs offices’ opinions are different from those of enterprises, the customs offices shall coordinate with the provincial/municipal Planning and Investment Services in considering and handling such difference. If there remain any unsolved problems, the General Department of Customs shall propose the Planning and Investment Ministry to consider and make decisions or amend and/or supplement the lists.
Article 3.- The lists promulgated together with this Decision shall be considered and supplemented to suit the practical situation at the request of specialized state management agencies.
Article 4.- This Decision replaces Decision No. 230/2000/QD-BKH of May 4, 2000, and Decision No. 704/2003/QD-BKH of September 18, 2003, issued by the Planning and Investment Minister, and shall take effect 15 days after its publication in “CONG BAO.”
| FOR THE PLANNING AND INVESTMENT MINISTER |
LIST
OF EQUIPMENT, MACHINERY, SPARE PARTS AND SPECIAL-USE MEANS OF TRANSPORT, WHICH CAN BE PRODUCED AT HOME
(Promulgated together with Decision No. 827/2006/QD-BKH of August 15, 2006 of the Planning and Investment Minister)
Ordinal number | Names of goods items | Codes under the Import Tariff | Specification signs and description of technical characteristics | ||
Heading | Subheading | ||||
1 | Plastic prepaid cards | 3926 | 90 | 99 | For prepaid mobile phones |
2 | Conveyor belts of all kinds | 4010 |
|
| Of a width of up to 2,150 mm and a length of up to 100 m |
3 | Paper prepaid cards | 4502 | 69 | 90 | For prepaid mobile phones |
4 | High-tension electric poles of thermal zinc-coated steel | 7308 | 20 | 11 | For transmission lines of a voltage of up to 500 kV |
5 | Assorted metal scaffoldings, props, shuttering | 7308 | 40 |
| Of common type |
6 | Tanks | 7309 | 00 | 00 | Of a capacity of up to 4,000 m3 |
7 | Pressure tanks and tanks for compressed gas | 7310 |
|
| Up to 1,000 m3, working pressure of up to 100 at; with the multiplication product PV of less than 4,000 Of a capacity of 26.2 – 108 liters |
8 | Assorted boilers (fuels: coal, gas, oil, sugarcane bagasse) | 8402 | 12 |
| Of an output of up to 25 tons/h, a pressure of up to 12 kG/cm2, a working pressure of up to 30 at |
9 | Internal combustion engines | 8408 |
|
| Of an output of up to 50 HP, diesel type |
10 | Ship axis and propeller (cast bronze) | 8410 |
|
| Propeller of a diameter of up to 2 m |
11 | Irrigation water pumps | 8413 | 81 |
| Up to Q = 32,000 m3/h, H = 30 – 40 m |
13 | Air compressors | 8414 | 40 | 00 | Up to 32 at, 18 m3/h |
14 | Industrial fans | 8414 8414 | 51 59 |
| Up to 100,000 m3/h Of an air flow of 54 m3/h, an impeller diameter of 1.3 m, an output of 1.5 HP, a noise level of under 78.5 dBA, an air humidity of under 80%, for industrial ventilation and cutoff |
15 | Cyclones and furnaces | 8416 |
|
| Up to 3.5 m3/h |
16 | Equipment for production of assorted baked bricks | 8416 |
|
| Of an output of up to 20 million bricks/year |
| Equipment for production of pure ice | 8418 |
|
| Parameters of big machines: ice cube size of 48 x 80 mm, an output of 9-10 tons/hr or 400 kg/batch, power consumption level of 0.085 kwh/kg of ice, the compressor’s output of 50 HP |
17 | Refrigerating chambers (ashore) | 8418 | 50 | 22 | Joined with Polyurethane panels, insulated, two sides covered with plastic-coated iron sheets, refrigerating chambers are of a height of up to 10 m and capacity of up to 20,000 m3 |
18 | Scale ice-makers | 8418 | 69 | 50 |
|
19 | Sterilizing steamers | 8419 | 20 | 00 | Of types of 20, 52 and 75 liters |
20 | Cabinet dryers | 8419 | 39 | 19 | Of types of between 30 and 200 liters |
21 | Drum dryers | 8419 |
|
| Of an output of up to 1 ton/hr |
22 | Steam injection dryers | 8419 | 39 | 19 | Of a capacity of 2 liters/h, an input wind temperature of 180-350o C, an output wind temperature of 40-80o C, an output of 12 kW, and with variable injection speeds |
23 | Block brick-pressers | 8420 | 10 | 90 | Up to 600 bricks/h, 13 kW |
24 | Sleeve-type dust filters | 8421 | 39 |
| Of various kinds |
25 | Sluice-gate -closing and -opening machines, operated by electric motor | 8425 | 11 | 00 | Of a lifting capacity of up to 100 tons |
26 | Sluice-gate -opening and-closing machines, hand-operated | 8425 | 19 | 00 | Of a lifting capacity of up to 30 tons |
27 | Winches, operated by electric motor | 8425 | 31 | 00 | Of a lifting capacity of up to 50 tons |
28 | Assorted winches | 8425 | 39 | 00 | Of a lifting capacity of up to 10 tons |
29 | Hydraulic jacks for tunnel furnaces | 8425 | 42 |
| Of a thrust of up to 60 tons, a stroke of 1.6 m |
30 | Derricks on assorted river ships, coastal ships | 8426 | 11 | 00 | Of a lifting capacity of up to 15 tons, a reach of 18 m |
31 | Gantry cranes | 8426 |
|
| Of a lifting capacity of up to 125 tons, a span of up to 64 m |
32 | Bridge cranes | 8426 |
|
| Of one-beam type (of a lifting capacity of up to 10 tons, a span of up to 25 m) Of two-beam type (of a lifting capacity of up to 90 tons, a span of up to 34 m) Of tower type (of a lifting capacity of up to 20 tons, a reach of up to 25 m) |
33 | Elevators | 8428 |
|
| Of a lifting capacity of up to 500 kg – an output of 3 kW |
34 | Conveyor screws of all kinds | 8428 |
|
| Of a diameter of up to 600 mm and a length of 30 m |
35 | Lifts | 8428 | 10 | 10 | For carrying humans (of a load of up to 2 tons and a speed of up to 1.5m/s) For carrying goods (of a load of up to 5 tons and a speed of up 1.5 m/s) |
36 | Skip hoists | 8428 | 10 | 90 | Of a capacity of up to 60 m3/h |
37 | Conveyor buckets of all kinds | 8428 | 32 |
| Of a capacity of up to 60 m3/h, a height of 25 m |
38 | Waggons of tunnel furnaces | 8428 | 50 | 00 |
|
39 | Static pneumatic-tire road rollers | 8429 | 40 | 10 | 10 - 12 tons |
40 | Static steel-wheel road rollers | 8429 | 40 | 10 | 6 - 12 tons |
41 | Vibrating steel-wheel road rollers | 8429 | 40 | 10 | Of a load of up to 10 tons when vibrating |
42 | Equipment for driving cast-in-place concrete piles for construction works, including: |
|
|
|
|
| Drilling buckets | 8431 | 41 | 00 | f: 600 - 2,200 mm |
| Scrapping buckets | 8431 | 41 | 00 | f: 600 - 2,200 mm |
| Concrete-placing tube sets | 8431 | 43 | 90 | f: 219 - 273 mm, 80 m long |
| Cleaning blow-tubes | 8431 | 43 | 90 | f: 89 mm, 80 m long |
43 | Sugarcane-planting combined machines | 8432 |
|
| Making cuts and fertilizing before planting at a capacity of 0.2 ha/h, with more than 40,000 cuttings and a working width 1.4 m |
44 | Spreading rice harvesters | 8433 | 51 | 00 | Of a cutting width of 1.2 - 1.5m an output of up to 0.5 ha/h |
45 | Rice-threaders, with or without motor | 8433 | 52 | 00 | Of an output of up to 2.5 tons/h |
46 | Combined sugarcane harvesters | 8433 | 59 | 00 | Of a capacity of 0.3-0.5 ha/h, automatically cutting tops, roots and conveying back in rows |
47 | Milking machines | 8434 | 10 | 10 | Operated by single-phase motor of a power of 1.1 kW, a speed of 4,450 rounds/minute, double-pace type, and up to the food quality, hygiene and safety standard |
48 | Ostrich egg incubators | 8436 | 21 |
| AT-252, of a capacity of 252 eggs/batch |
49 | Fish feed pelleting machines | 8436 | 80 |
| Of a capacity of 1,500 kg/h, an output of 75 kW, a weight of 2,600 kg, and dimensions of 3,000 x 2,500 x 3,000 mm |
50 | Rice-husking machines | 8437 8437 | 80 80 | 10 20 | Of a capacity of up to 6 tons/h |
51 | Rice-polishing machines of all kinds | 8437 | 80 | 51 | Of a capacity of up to 6 tons/h |
52 | Export rice-processing chains | 8437 | 10 |
| Of a capacity of up to 10 tons/h |
53 | Beer production chains | 8438 | 40 |
| Of a capacity of up to 10,000 liters/day |
54 | Fish powder processing chains | 8438 | 80 | 91 | Of a capacity of up to 80 tons of raw materials/day |
55 | Pie filling extruders | 8438 | 80 | 91 | Of a capacity of 2,400 products/h, with a filling weight of 8-20 g (an error of 0.5 g) |
56 | Krap paper production chains | 8439 | 20 | 00 | Of a capacity of up to 1,000 - 10,000 tons/year |
57 | Votive paper production chains | 8439 | 20 | 00 | Of a capacity of up to 2,000 tons/year |
58 | Tissue paper production chains | 8439 | 20 | 00 | Of a capacity of up to 2,000 tons/year |
59 | Stamp-removing and postage-printing machines | 8443 | 59 |
|
|
60 | Automatic thread cutters in industrial sewing machines | 8445 | 90 | 19 | Seam programming and automatic control of seaming needles |
61 | PP bag weaving machines | 8447 |
|
| MDB-4, of a capacity of 1.7-2 m/minute |
62 | Tubular knit fabric anti-folding machines | 8448 | 59 | 00 | AC-680, of a speed of 10-40 m/minute |
63 | Toothed rough rolling machines | 8455 | 10 |
| Up to d = 800 mm, l = 400, 15 m3/h |
64 | Plain rolling machines | 8455 | 10 |
| Up to d = 1,000 mm, l = 800, 20 m3/h |
65 | Construction steel rolling chains | 8455 | 21 | 00 | Of a capacity of up to 30,000 tons/year |
66 | Corrugated iron sheet rolling chains | 8455 | 22 | 00 | Of a capacity of 15-20 HP, a weight of 8-12 tons, dimensions of 10 x 1.5 m, a rolling speed of 3-5 m/minute, and an iron sheet thickness of 0.34-0.6 mm |
67 | C and Z-shaped binding rafter rolling machines | 8455 | 22 | 00 | Of a capacity of 30 HP, a weight of 8.5 tons, dimensions of 8 x 8 m, a rolling speed of 12-15 m/minute, and an iron sheet thickness of 1.5-3 mm |
68 | Common-type multi-purpose lathes | 8458 | 19 |
| Of a diameter of up to 650 mm, a length of 3,000 mm |
69 | Rod drilling machines | 8459 | 29 |
| Drill’s diameter of up to 40 mm, a stroke of 400 mm |
70 | Table drilling machines | 8459 | 29 |
| Of a diameter of up to 13 mm |
71 | Two-stone grinding machines | 8460 | 90 |
| Of a diameter of up to 400 mm |
72 | Common shaping machines | 8461 | 20 |
| Of a stroke of 650 mm |
73 | Rod sawing machines | 8461 | 50 |
|
|
74 | Pneumatic hammers | 8462 | 10 |
| Weighing up to 75 kg |
75 | Sand separators | 8474 | 10 |
| Of a capacity of 25 – 50 m3/h |
76 | Spiral screws | 8474 | 10 | 10 |
|
77 | Stone-grinding and -screening stations | 8474 | 20 |
| Of a capacity of up to 50 tons/h |
78 | Ball mills | 8474 | 20 |
| Of a capacity of up to 6 tons/h, number of rounds n = 29.2 rounds/minute Up to 14 tons/h, n = 21.4 rounds/minute (Input materials: 0-0.25 mm, output products: 0-0.074 mm) |
79 | Super-fine ball mills | 8474 | 20 |
| For crushing calcium carbonate, of a capacity of up to 2.5 tons/h, a fineness of d50 to 2 μm, d97 to 10 μm |
80 | Jaw mills 400 x 600 | 8474 | 20 |
| Up to 10 m3/h |
81 | Circle mills | 8474 | 20 |
| Up to d = 2,800, 40 kW |
82 | Concrete-mixing machines of free-drop type | 8474 | 31 |
| Up to 250 liters/batch, 5.2 kW |
83 | Concrete-mixing machines of coercive type | 8474 | 31 |
| Up to 500 liters/batch, 10 kW |
84 | Concrete-mixing stations | 8474 | 31 |
| Of a capacity of up to 80 m3/h |
85 | Hot-asphalt concrete-mixing stations | 8474 | 32 |
| Of a capacity of up to 104 tons/h |
86 | Combined vacuum mixing-extruding machines | 8474 | 39 | 10 | Of a capacity of up to 12 m3/h, 130 kW |
87 | Two-axe mixers with screen filters | 8474 | 39 | 10 | Of a capacity of up to 20 m3/h, 40 kW |
88 | Equipment for manufacturing centrifugal water pipes and reinforced concrete poles | 8474 | 80 | 10 | Up to 300 - 1,500 mm; 75 kW; 110 -220 kV |
89 | PEHD pipe production chains | 8477 | 20 | 20 | Producing PEHD, LD, PVC, PTE pipes, of a diameter of f400, f630 |
90 | Vulcanizers for shaping rubber belts | 8477 | 40 | 10 | Of C-class width, a length of up to 14 m, 15 belts per batch, molding temperature of 150o C, hydraulic diameter of 360 mm, mold size of 20 x 36 inches, pressure of 150 kg/cm2, semi-automatic type |
91 | Equipment for feeding and –heat-drying materials for plastic presses | 8477 | 90 | 39 | Material feeder: Power source 220 V, single phase, 50 HZ, dimensions 540 x 410 x 360 mm, funnel capacity 6 liters, weight 11 kg, feeding capacity 300 kg/h. Dryer: Power source 380 V, three phases, 50 HZ, centrifugal blower 90W – 1,450 rounds/minute, weight 45 kg, useful capacity 25 kg. Supplying granular materials sized 1-3 mm |
92 | Rubber latex processing chains | 8479 |
|
| Of a capacity of up to 6 tons/h |
93 | NPK fertilizer production chains | 8479 |
|
| Of a capacity of 30,000 tons/year |
94 | Micro-biological fertilizer chains | 8479 |
|
| Of a capacity of 20 tons/h |
95 | Automatic machines for ceiling fan wire coiling | 8479 | 81 |
| Of a coiling speed of up to 2,000 rounds/minute, motor power of 2 x 0.5 HP, three phases, 220/380V, number of coiling grooves 12-30, micro-control type |
96 | Rotary grates of cement shaft furnaces | 8479 | 82 | 19 |
|
97 | Hydraulic gear box assemblies | 8483 | 40 | 21 | Fitted with diesel motor of up to 15 CV |
98 | Generators (ashore) | 8501 | 61 |
| Of an output not exceeding 75 kVA |
|
| 8502 | 11 | 00 | Of an output voltage of 220/240 V |
99 | Single-phase AC motors (not watertight) | 8501 |
|
| Of an output of up to 2.2 kW, asynchronous capacitor motor, short-circuit rotor |
100 | Three-phase AC motors (not watertight) | 8501 |
|
| Of an output of between 0.55 kW and 90 kW, asynchronous motor, short-circuit rotor of between 750 rounds/minute and 3,000 rounds/minute |
101 | Three-phase AC motors (not watertight) | 8501 |
|
| Of an output of between 90 kW and 1,000 kW, asynchronous motor, short-circuit rotor of 600 rounds/minute |
102 | DC-46V source system | 8504 | 40 | 30 | VITECO-ARGUS (10A - 600A) |
103 | Source system | 8504 | 40 | 90 | HRS 4500 SDPS 250 |
104 | Independent source equipment | 8504 | 40 | 90 | DPS 4825 DPS 4850 |
105 | DC source equipment | 8504 | 40 | 90 | HFCR-1600 |
106 | Ballasts for fluorescent tubes | 8504 | 10 | 00 | 220V - 50 Hz Of an output of between 20 and 40 W |
107 | Voltage transformers | 8504 8504 8504 | 21 22 23 |
| Of a voltage of up to 110 kV Of an output of up to 63 MVA |
108 | Electric current transformers | 8504 | 31 | 10 | Of a voltage of between 6 and 35 kV, a current transformation ratio 5 – 1,000/5A |
109 | One-phase voltage transformers (ashore) | 8504 | 31 | 10 | Of a voltage of between 6 and 35 kV, induction type |
110 | Three-phase voltage transformers (ashore) | 8504 | 31 | 10 | Of a voltage of between 6 and 15 kV, induction type |
111 | Low-voltage 380V and medium-voltage 35kV instrument transformers | 8504 | 31 |
| Primary, up to 2,000 A; secondary, 1A and 5A |
112 | Medium-voltage instrument transformers | 8504 | 32 |
| Of a voltage of up to 35 kV |
113 | Gear boxes | 8708 | 40 |
| HS14, HS19, GT10, GT2, HDC |
114 | Miner’s torches | 8513 8513 | 10 10 | 10 20 | DM 10 A |
115 | Miner’s torch-charging stands | 8513 8513 | 90 90 | 10 20 | GN 16 - 32 – 48 |
116 | Subscriber cards of electronic switchboards | 8517 |
|
| For postal sector |
117 | Public telephones | 8517 | 19 | 10 | V-820 type |
118 | VSAT switchboards | 8517 | 30 |
| DTS VSAT |
119 | Wire connection boxes | 8517 | 30 |
| HC, HD, HDTM-50, HPDR, jack batche |
120 | Connection boxes | 8517 | 30 |
| HCN 30, HCN 50 |
121 | Subscriber security boxes | 8517 | 30 |
| DS391, General Department of Taxation (GDT) |
122 | Subscriber line connection boxes | 8517 | 30 |
| UD |
123 | Telephonic cable connection cabinets | 8517 | 30 |
| Of iron and composite (KP 300, TS, KP 300 PCS, KP-600-PCS, KP-1600, KP-600, KP-1200) |
124 | Subscriber security boxes | 8517 | 30 |
| DS301 GDT |
125 | Cable sleeves | 8517 | 30 |
| PMS 1-3 PMS 4-6 |
126 | Optic fiber cable sleeves | 8517 | 30 |
| PMO-12/72 FO |
127 | Post office boxes | 8517 | 30 |
|
|
128 | Manual direction finder (MDF) connection devices | 8517 | 50 |
| From 500 to 5,000 pairs |
129 | Data-link control (DLC) subscriber circuit devices | 8517 | 50 |
|
|
130 | Optic-fiber cable terminal equipment | 8517 | 50 |
| STM-1, STM-4, STM-16 |
131 | Modems V-ADSL | 8517 | 50 | 10 | For common telephones |
132 | DTS-4000-AN access switchboard system | 8517 | 50 | 90 |
|
133 | Devices to prevent illegal line connection | 8517 | 50 | 90 | P-line type |
134 | Lightning-cutting, screening devices | 8517 | 80 | 99 | LPS |
135 | MDF five-point security devices | 8517 | 90 | 90 | MDF S2000-PTC |
136 | MDF-connecting stands of P6000 type | 8517 | 90 | 90 | MDF P6000 |
137 | GANIVO covers of communication cable holes | 8517 | 90 | 90 | Nhp003023023 |
138 | Wire connection slates | 8517 | 90 | 90 | One pair with grease (BI-1), 10 pairs with grease (BI-10), line SL10, line PO-10 (IDC102), subscriber line (PO-IDF and PO-ID) |
139 | REF cable connectors | 8517 | 90 | 90 | UY2 UY-POSTEF |
140 | Optic transmission PDH Optimux (4E1) | 8517 | 90 | 90 |
|
141 | Lightning-arresting devices for local-area networks | 8517 | 80 | 99 | POSTEF PP-RJ45/16 |
142 | Lightning-arresting devices on lines | 8517 | 80 | 99 | POSTEF HSP 10-72V, POSTEF PCX - T43, POSTEF-B180, POSTEF-B480, used for the postal service |
143 | Data-link control devices | 8517 | 90 | 90 | POSTEF DK-2000 |
144 | Assorted speakers | 8518 | 29 |
|
|
145 | Magnetized cards | 8524 | 60 | 00 | Entry/exit control cards |
146 | Transmission equipment for radio and television broadcasting | 8525 | 10 | 10 | FM band, of an output of 1-50 kW, cooled with air or liquids |
147 | Transmission equipment for television broadcasting | 8525 | 10 | 10 | VHF/UHF bands, of an output of 1-50 kW, analog/digital technology, cooled with air or liquids |
148 | Video connection control units | 8525 | 10 | 21 | Wire and wireless type |
149 | Central control systems | 8525 | 10 | 22 |
|
150 | Remote control systems | 8525 | 10 | 23 |
|
151 | Television decoders and channel selectors | 8525 | 10 | 40 |
|
152 | Digital microwave equipment | 8525 | 20 | 50 | 4 x 2, 8 x 2, 16 x 2 Mbit/s |
153 | Few-channel digital microwave equipment | 8525 | 20 | 50 | Between 1 and 6 channels |
154 | Digital radio relay systems | 8525 | 20 | 50 |
|
155 | Transmitters for radio telephony and telegraphy | 8525 | 20 | 91 | VHF/UHF 1GHz-14GHz |
156 | Microwave transmitters for television broadcasting | 8525 | 20 | 92 | VHF/UHF 1GHz-14GHz, analog/digital technology |
157 | Microwave transmitters for radio broadcasting | 8525 | 20 | 99 | VHF/UHF 1GHz-14GHz, analog/digital technology |
158 | Wireless radio transmission equipment | 8525 | 20 | 99 | Remote-control wireless radio receivers, remote-control multi-channel encoders |
159 | Ground radars | 8526 | 10 | 10 |
|
160 | Radio remote control units | 8526 | 92 | 00 |
|
161 | Microwave antenna posts | 8529 |
|
| Of a height of up to 150 m |
162 | Antenna pillars | 8529 |
|
| Stay cables of a triangle cross-section of 330, 660, 800, 1,200 mm |
163 | Assorted antennas for transmitters | 8529 | 10 |
| For radio and television broadcasting, radio telephony and telegraphy |
164 | Spare parts and accessories of transmitters | 8529 |
|
| For radio and television broadcasting: dividers, adders, filters, channel adders |
165 | High-voltage switches (ashore) | 8535 | 21 |
| For a voltage of 6 - 35 kV. Standard current of between 200 and 1,000 A |
166 | Anti-lightning devices for power lines | 8535 | 40 | 10 |
|
167 | Assorted automatic circuit breakers (ashore) | 8536 | 20 | 00 | U of up to 500 V I of up to 600 A |
168 | Switches and current-converting switches (ashore) | 8536 | 50 |
| I of up to 3,000 A |
169 | Magnetic starters (ashore) | 8536 | 90 | 90 | Ucd 220 V, 380 V I of between 4 A and 450 A |
170 | Electric cabinets (ashore) | 8537 |
|
| Cabinet shells coated with electrostatic paint, fitted with telephony equipment or telecommunications equipment inside |
171 | Grid control and security cabinets, and transformers | 8537 |
|
| At transformer stations for a voltage of up to 220 kV |
172 | Waterway navigation signal lights BH-998P | 8539 | 90 | 90 |
|
173 | SIM cards | 8542 | 10 | 00 | 16 K, 32 K, 64 K for GSM mobile phones |
174 | RUIM cards | 8542 | 10 | 00 | 16 K, 32 K, 64 K for CDMA mobile phones |
175 | Public phone cards | 8542 | 10 | 00 |
|
176 | Subscriber telephone lines with reinforced wires | 8544 | 43 | 12 | POSTEF DROPWIRE 11 x 0.2 |
177 | Electrically insulated porcelain | 8546 | 20 |
| Of ceramics, for a voltage of up to 35 kV |
178 | Railway passenger coaches | 8605 | 00 | 00 | Various kinds (hard seats, soft seats; hard berths, soft berths; double-deck coaches; B coaches), high-class coaches, of the second generation and a length of 20 meters |
179 | Dining coaches, public-duty and generator coaches, luggage coaches | 8605 | 00 | 00 |
|
180 | Composite tank wagons for the transport of fluids | 8606 | 10 | 00 | Of a capacity of up to 30 m3 |
181 | H coaches | 8606 | 10 | 00 | Of a length of 14 m, fitted with bogies 34B made in China |
182 | Over-size H coaches 1435 | 8606 | 10 | 00 | Of a length of 14 m and a load of 60 tons |
183 | Covered cargo coaches | 8606 | 91 | 00 | Of a length of 14 m, fitted with modified bogies 34 B |
184 | M container coaches | 8606 | 99 | 00 | Of a length of 14 m, fitted with bogies 34 B made in China |
185 | 3-GCH M container coaches | 8606 | 99 | 00 | Of a length of 16 m, fitted with three modified bogies 34 B |
186 | N (low-wall) coaches | 8606 | 99 | 00 | Of a length of 14 m, fitted with modified bogies 34 B |
187 | Passenger coach bogies of all kinds | 8607 | 12 | 00 | Indian-type with steel springs, air-spring type |
188 | Cargo coach bogies of all kinds | 8607 | 12 | 00 | Of welded steel type |
189 | Small tractors, four-wheel tractors with ploughs, harrows behind | 8701 |
|
| Of between 8 CV and 20 CV |
190 | Passenger cars | 8702 | 10 |
| Of common type, with between 10 and 50 seats |
191 | Buses | 8702 | 10 | 10 | Of common type, with up to 80 seats |
192 | Small cars | 8703 |
|
| Of up to 9 seats |
193 | Dumpers | 8704 | 10 |
| Of a tonnage of up to 15 tons |
194 | Light trucks | 8704 8704 | 21 31 |
| Of a gross tonnage of up to 5 tons |
195 | Crane trucks and lift trucks | 8705 | 10 | 00 | Capable of lifting up to 14 m |
196 | Folklifts | 8705 | 10 | 00 | Of a load of up to 2 tons |
197 | Street and park watering vehicles | 8705 | 90 | 10 | Of a capacity of 3-8 m3 of water |
198 | Refuse collection trucks | 8705 | 90 | 10 | Of a capacity of up to 5 m3 |
199 | Mobile television stations | 8705 | 90 | 90 |
|
200 | Mobile stages | 8705 | 90 | 90 | Of an area of 80 m2 |
201 | Double-deck motorbike carriers | 8705 | 90 | 90 | Of a load of up to 40 motorbikes |
202 | Tank cars for liquids (chemicals) | 8705 | 90 | 90 | Of a capacity of up to 12 m3 |
203 | Motorcycles | 8711 | 10 |
| Of a cylinder capacity of up to 50 cc |
|
| 8711 | 20 |
| Of a cylinder capacity of between 50 and 250 cc |
204 | Bicycles and other pedal-powered cycles (including three-wheel cargo pedicabs), non-motorized | 8712 |
|
|
|
|
| 8712 | 00 | 20 |
|
|
| 8712 | 00 | 30 |
|
|
| 8712 | 00 | 90 |
|
205 | Passenger ships | 8901 | 10 |
| Of common type, with up to 300 seats |
206 | Self-propelled ferryboats | 8901 | 10 |
| All types |
207 | Oil tankers | 8901 | 20 |
| Of a tonnage of up to 20,000 tons |
208 | Liquefied gas ships | 8901 | 20 |
| Of a tonnage of up to 5,000 tons |
209 | Cargo ships | 8901 | 90 |
| Of a tonnage of up to 53,000 DWT |
210 | River-coastal self-propelled ships | 8901 | 90 |
| Of a tonnage of between 200-1,100 tons |
211 | Special-purpose barges fitted with assorted cranes | 8901 | 90 |
| Of a lifting capacity of up to 4,200 tons |
212 | Sea barges | 8901 | 90 | 10 | All types |
213 | River barges | 8901 | 90 | 10 | All types |
214 | River tug barges | 8901 | 90 | 10 | Of a tonnage of 200-600 tons |
215 | Special-use barges for oil and gas industry | 8901 | 90 | 26 | Of a length of 109.8 m, a width of 32 m, a height of 7 m and a tonnage of 12,000 tons |
216 | Container sea liners | 8901 | 90 |
| Of a tonnage of up to 2,000 TEU |
217 | Assorted fishing vessels of wood shells | 8902 |
|
| Of an output of up to 600 CV |
218 | Assorted fishing vessels of iron shells | 8902 |
|
| Of an output of up to 1,980 CV |
219 | Assorted fishing vessels of composite shells | 8902 |
|
| Of an output of up to 1,000 CV |
220 | Fishing service vessels | 8902 |
|
| Of an output of up to 2,000 CV |
221 | Fishery control vessels | 8902 |
|
| Of an output of up to 600 CV |
222 | Sea tug vessels | 8904 |
|
| Of an output of up to 7,000 CV |
223 | Buoy-laying vessels | 8904 |
|
| Of an output of up to 3,000 CV |
224 | River tug-push vessels | 8904 |
|
| Of an output of up to 5,000 CV |
225 | Self-propelled dredgers | 8905 | 10 | 00 | Of a capacity of up to 5,000 m3/h |
226 | Non-self-propelled dredgers | 8905 | 10 | 00 | Of a capacity of up to 5,000 m3/h, an output of up to 4,170 CV |
227 | River and sea dredgers | 8905 | 10 | 00 | With a dredging depth of 10-20 m, an output of up to 3,000 CV |
228 | Floating docks | 8905 | 90 | 10 | Of a lifting capacity of up to 20,000 tons |
229 | Special-purpose high-speed ships | 8906 | 90 | 90 | Of a speed of up to 32 nautical miles/h, an output of up to 3,200 CV |
230 | Marine research ships | 8906 | 90 | 90 | Of an output of up to 5,000 CV |
231 | Buoy-laying machines of all kinds | 9807 |
|
| Of a lifting capacity of up to 5 tons |
232 | Electronic scales | 9016 | 00 | 10 | C-3000, C30K, C-6000, C-150KP, C-60KP, used for postal service |
233 | Automatic electronic scales | 9016 | 00 | 10 | For up to 120 tons |
234 | Galvanopuncturing machines | 9018 | 90 | 90 | DC 6v - 2f-c |
235 | Combined electric meters and registers | 9028 |
|
| For metering electric motors of an output of under 50W, voltage and power |
236 | One-phase and three-phase electric meters | 9028 | 30 | 10 | U of up to 380 V I of up to 100 A |
237 | Card-accepting gate entry and exit control devices | 9106 | 10 | 00 |
|
LIST
OF CONSTRUCTION SUPPLIES WHICH CAN BE PRODUCED AT HOME
(Promulgated together with Decision No. 827/2006/QD-BKH of August 15, 2006 of the Planning and Investment Minister)
Ordinal number | Names of supplies | Codes according to the Import Tariff | Specification signs, description of technical characteristics | ||
Heading | Sub-heading | ||||
1 | Sand | 2505 |
|
| Black sand, yellow sand |
2 | Quartz | 2506 | 10 | 00 | In white powder |
3 | Clay | 2507 | 00 | 00 |
|
4 | Kaolin | 2507 | 00 | 00 | Al2O3: 21 – 37% |
5 | Bentonite for cast-in-place piles | 2508 | 10 | 00 | HPB600-API, in light yellow powder, of high viscosity, for use as a drilling mud for cast-in-place piles, petroleum exploration and exploitation |
6 | Bentonite in casting molds | 2508 | 10 | 00 | In light yellow powder |
7 | Bentonite for drilling wells | 2508 | 10 | 00 | NPB600-H, in light yellow powder, of low viscosity, for use as a drilling mud for geological exploration and underground water exploitation |
8 | Diatomite | 2512 | 00 | 00 | In powder form |
9 | Marble blocks, slabs and slates | 2515 6801 |
00 |
00 |
|
10 | Granite, basalt, base and sabbase blocks, slabs and slates. | 2516 6810 |
00 |
00 |
|
11 | Construction stone and gravel | 2517 |
|
|
|
12 | Dolomite | 2518 |
|
| In gray or white powder |
13 | Limestone and limestone powder | 2521 | 00 | 00 |
|
14 | Lime | 2522 |
|
|
|
15 | Clinker | 2523 | 10 | 00 | For production of Portland cement |
16 | Sulfate-resisting cement | 2523 | 30 | 00 | PCs, PChs |
17 | Pozzolanic cement | 2523 | 90 | 00 | PCpuz |
18 | Low-heat cement | 2523 | 90 | 00 | PCit |
19 | Portland cement | 2523 | 29 |
| PCB30, PCB40, PC30, PC40, PC50 |
20 | White portland cement | 2523 | 21 | 00 | PCw |
21 | Mica | 2525 | 20 | 00 | In white-clear flakes, of a size of between 16 and 100 mesh |
22 | Feldspar | 2529 | 10 | 00 | In white or light-yellow powder or granules |
23 | Fluoride | 2529 2529 | 21 22 | 00 00 | In powder |
24 | Bottled oxygen | 2804 | 40 | 00 | Purity > 99.6% |
25 | Bottled nitrogen | 2804 | 30 | 00 | Purity > 99.95% |
26 | Dioxide carbon (liquid, solid) | 2811 | 21 | 00 | Purity > 99.6% |
27 | Calcium chloride (CaCl2) | 2827 | 20 | 10 | In white powder |
28 | Edible salt | 2827 | 39 | 00 | Refined and industrial salt (NaCl) |
29 | Carbonate calcium (CaCO3) | 2836 | 50 |
| In white powder or granules |
30 | Flour silicate | 2839 | 90 | 00 | In light yellow powder |
31 | Barite API | 2851 | 00 | 90 | In light beige powder |
32 | Biosafe | 2851 | 00 | 90 | In paste liquid form, colored from light yellow to yellow |
33 | Acetylene (C2H2) | 2901 | 29 | 10 | Purity > 99.7% |
34 | DMC - lub | 2904 | 00 | 00 | In mud form and dark color |
35 | Paints for drilling platforms and other structures | 3208 3209 | 10 90 | 40 90 |
|
36 | Chemical paints of all kinds | 3208 3209 |
|
| Assorted paints for specific industrial decoration |
37 | Solvents accompanying paints | 3209 | 90 | 90 | In light yellow powder |
38 | Industrial adhesives | 3506 |
|
|
|
39 | Refractory mortar | 3816 | 00 | 10 | Alum paste and chamotte |
40 | HDPE plastic tubes for protection of communication cables | 3917 |
|
| f32 mm- f40 mm |
41 | Multi-layer aluminum plastic tubes | 3917 |
|
| Inner diameter of up to f 35 mm |
42 | PVC tubes and accessories | 3917 |
|
| f20 - f200 mm |
43 | Plastic roofing sheets and boards | 3920 3921 |
|
| 0.9 mm x 0.8 m x 2 m |
44 | Panels of Polyurethane | 3921 | 13 | 10 | 50-150 mm thick |
45 | Plastic doors | 3925 3925 | 20 30 | 00 00 |
|
46 | Civil-use water supply and drainage washers | 4016 | 99 | 99 | To be fitted to cast iron, plastic, and concrete pipelines |
47 | Rubber sheets | 4016 | 99 | 94 |
|
48 | Electrically insulated carpets | 4016 | 99 | 99 | For a voltage of 10-22-35 kV, of a size of 1 m x 0.64 m x 0.008 m |
49 | Electrically insulated boots and gloves | 4016 | 99 | 99 | For a voltage of 10-22-35 kV |
50 | Rubber carpets for physical training and sports | 4016 | 99 | 94 | Size of 1 x 0.008 m for badminton courts |
51 | Bamboo boards | 4602 | 10 | 20 | For use as construction cofferings |
52 | Wood for chocking or lining on drilling platforms | 4017 | 99 |
|
|
53 | Coffering wood of standard sizes | 4409 | 20 |
|
|
54 | Assorted setts | 6801 | 00 | 00 |
|
55 | Millstones, grinding wheels or the like | 6804 | 10 | 00 | Made of artificial corundum granules, ceramic adhesive. Of an outer diameter of between 5 mm and 900 mm, a thickness of between 5 mm and 300 mm |
56 | Grinding wheels of agglomerated abrasives containing grindstone granules of over 99% of Al203 | 6804 | 22 |
| Made of artificial corundum granules. Available in square, rectangular and other unusual shapes |
57 | Edge grindstones, metal-cutting stones, containing grindstone granules of over 99% of Al203 | 6804 | 30 |
| Made of artificial corundum granules, plastic adhesive. Wheel-shaped stones, of an outer diameter of between 100 mm and 350 mm, a thickness of between 1.5 mm and 5 mm |
58 | Artificial abrasive powder (granule) | 6805 |
|
| Rough and fine granules, made from aluminum bauxite ore |
59 | Products of cement and concrete | 6810 |
|
|
|
60 | Electric wire poles of centrifugal concrete | 6810 | 91 | 90 | For grids of up to 35 kV |
61 | Block bricks | 6810 | 11 | 00 | Created by compressing cement and sand |
62 | Products of asbestos cement, cellulose fiber cement or the like | 6811 |
|
|
|
63 | Roofing sheets of fibro-cement and asbestos cement | 6811 6811 | 10 20 | 00 00 | 920 x 1,500 mm |
64 | Refractory bricks | 6902 | 10 | 00 | Mg-Chrome, Mg-Spinel (MS80-, MS86), Chamotte A (TS A), Chamotte B (TS B) |
65 | Walling and flooring tiles | 6904
6908 |
|
| (Ceramic, Granite, Cotto, Terrazo, Brestonstone, Terastone), of a size of up to 500 mm x 500 mm |
66 | Building bricks, flooring tiles, roofing tiles | 6904 |
|
|
|
67 | Ceramic sanitary ware | 6910 |
|
| All kinds |
68 | Flat glass, opacified, reflecting glass | 7003 7003 7003 7003 7004 7004 7004 7004 7005 7005 7005 7005 | 12 12 19 19 20 20 90 90 10 10 21 21 | 20 90 20 90 20 90 20 90 20 90 20 90 | Of a thickness of between 1.5 - 18 mm |
69 | Multiple-walled glass | 7008 | 00 | 00 | Of a thickness of between 1.5 - 18 mm |
70 | Mirror | 7009 |
|
| Of a thickness of between 1.5 - 18 mm |
71 | Hot-rolled band and coiled steel, already soaked for rust removal | 7208 |
|
| SPHC/O, of a width of 600 mm or more |
72 | Cold-rolled band and coiled steel | 7209 |
|
| SPCC, SPCC-1, SPCC-2,4,8, SPCD, SPCE, of a width of 600 mm or more |
73 | Zinc-plated steel sheets | 7210 | 30 | 11 | Of a thickness not exceeding 1.2 mm |
74 | Alluminum-zinc alloy-plated steel sheets | 7210 | 61 | 10 | Of a thickness not exceeding 1.2 mm |
75 | Zinc-plated and colored steel sheets | 7210 | 70 | 30 | Of a thickness not exceeding 1.2 mm |
76 | Alluminum-zinc alloy-plated and colored steel sheets | 7210 | 70 | 90 | Of a thickness not exceeding 1.2 mm |
77 | Steel rods, steel coils of all kinds (round plain and veined) | 7213
7214 7214 | 10
20 91 |
| f5.5 - f40 mm |
78 | Steel in shapes | 7216
7216 7216 7216 7216 7216 | 10
22 31 32 33 40 | 00
00 11 11 11 11 | Steel with U, I, L, T shapes, of a height of up 140 mm |
79 | Common steel wire (black and zinc-plated) | 7217
7217 | 10
90 | 10
20 | f1 - f5 mm |
80 | Cast iron pipes (gray cast iron, ductile cast iron) | 7303
7303 7303 7303 | 00
00 00 00 | 11
13 21 22 | Those of common types and those with a cross-section of f150 - f600 mm and a length of 5 - 6 m |
81 | High pressure pipes, valve doors | 7304 | 31 |
| Of steel for hydropower projects, of a thickness of between 6 and 20 mm, pressure of over 15 at |
82 | Assorted black or zinc-plated welded steel pipes | 7306 |
|
| f 14 - f 115 mm |
83 | Assorted large-size twisted welded steel tubes | 7306 |
|
| f 400 - f 2,600 mm |
84 | Assorted doors and door frames of iron or steel | 7308 | 30 | 00 | Of common types |
85 | Steel girdles of road bridges and railroad bridges | 7308 | 10 |
| Steel girdles of road bridges of a span of up to 100 m, a tonnage of H30, Steel girdles of railway bridges, of a span of up to 100 m, and a tonnage of T26, |
86 | House frames, warehouse frames, pre-fabricated house structures of steel | 7308 9406 | 90 00 | 10 94 |
|
87 | Roofing sheets- corrugated zinc-plated or colored steel sheets | 7308 | 90 | 30 | Of a thickness of 0.25-0.55 mm, and a length of 3,500 mm |
88 | Assorted tanks | 7309 | 00 | 00 | Of common types |
89 | Assorted casks | 7310 |
|
| Of common types |
90 | Lightening-arresting steel cables and stranded wire LK-O9 | 7312 |
|
| Structured of up to 37 fibers, a cross section of up to 170 mm2 |
91 | Zinc-plated wire, barbed wire | 7313 | 00 | 00 |
|
92 | Steel or iron grill, netting, fencing | 7314 7314 | 20 50 | 00 00 | Of common types |
93 | Iron and steel nails | 7317 |
|
|
|
94 | Screws, bolts, nuts, washers | 7318 |
|
| Of common types |
95 | Round copper wire | 7408 | 11 | 10 | With a cross section of between 16 and 630 mm2 |
96 | Uncoated copper cable | 7413 7413 | 00 00 | 11 12 |
|
97 | Assorted electric wires | 7605 8544 |
|
| Non-alloy aluminum core |
98 | Shaped aluminum structures | 7610 7610 | 10 90 | 00 90 |
|
99 | Uncoated aluminum cable | 7614 7614 7614 7614 | 90 90 90 90 | 11 12 13 19 | With a cross-section of between 16 and 1,200 mm2 |
100 | Steel-core uncoated aluminum cable | 7614 7614 7614 7614 | 10 10 10 10 | 11 12 13 19 | With a cross-section of between 35 and 1,200 mm2 |
101 | Safety signboards | 8310 | 00 | 90 | Of a mixture of composite plastic and glass fibers |
102 | Welding wires | 8311 | 20 |
| NAEH14, of a cross section of f2.4; f3.2; f 4.0 NA71T1, of a cross section of f1.0; f1.2; f 1.6 NA70S, of a cross section of f0.8 - f 1.6 |
103 | Welding rods | 8311 | 30 |
| NT6013, NB6013, NA6013, NA7016, NA7018, of a size of f 2.5; f3.25; f 4.0; f5.0 - f 5.4 |
104 | Multi-purpose joints | 8483 | 60 | 00 | HH50 |
105 | Tubes of safety fuses | 8485 | 90 | 90 | f24 - f32 of composite |
106 | Iron and composite boxes of electricity meters | 8485 | 90 | 90 | Boxes of 1, 2, 4, 6 one-phase meters. Boxes of three-phase meters |
107 | Conductor coupling stands | 8517 | 50 | 90 | ODF conductor, IDF conductor |
108 | Conductor dividers | 8517 | 50 | 90 | 6-way iron boxes, 6-way and 9-way composite boxes |
109 | Telephone cables | 8544 | 49 |
| Of a diameter of between 0.4 and 0.9 mm, between 6 and 1,200 pairs |
110 | Cable with copper or aluminum core, AC, electrically insulated with PE, PVC for overhead medium- and low-voltage power lines | 8544
8544 8544 | 11
20 20 | 20
10 20 | With 1 or two cores, with a cross section of up to 630 mm2 each core With 3 or 4 cores, with a cross section of up to 400 mm2 each core |
111 | Data transmission cables (LAN cables) | 8544 | 49 |
| CAT5, CAT5E, CAT6 |
112 | Telephone subscriber wire | 8544 | 49 |
| Single or multiple filaments |
113 | Low-, medium- and high-voltage cables, electrically insulated with plastics and EPR | 8544 | 51 |
| Of a (core) cross section of up to 2,000 mm2 for one-phase lines and a voltage of 0.6 kV – 170 kV |
114 | Control cables of all kinds, consisting of between 2 and 91 cores | 8544 |
|
| Of a cross section of between 0.5 and 16 mm2 |
115 | Optic fiber cables | 9001 | 10 |
| Used for the postal service |
116 | Assorted lamp bulbs and tubes | 8539 | 21 |
| Filament lamps of common type |
LIST
OF SUPPLIES NECESSARY FOR PETROLEUM ACTIVITIES, WHICH CAN BE PRODUCED AT HOME
(Promulgated together with Decision No. 827/2006/QD-BKH of August 15, 2006 of the Planning and Investment Minister)
Ordinal number | Names | Codes under the Import Tariff | Specification signs, description of technical characteristics | ||
|
| Heading | Sub-heading |
| |
1 | Rice husk | 1213 | 00 | 00 |
|
2 | Biosafe | 1515 | 19 | 00 | In liquid form |
3 | Edible salt (sodium chloride) | 2501 | 00 | 10 |
|
4 | Graphite powder | 2504 | 10 | 00 |
|
5 | Quartz | 2506 | 10 | 00 | In white powder |
6 | Bentonite for cast-in-place piles | 2508 | 10 | 00 | HPB600-API, in light yellow powder, of high viscosity, for use as a drilling mud for cast-in-place piles, petroleum exploration and exploitation |
7 | Bentonite for casting molds | 2508 | 10 | 00 | In light yellow powder |
8 | Bentonite for drilling wells | 2508 | 10 | 00 | NPB600-H, in light yellow powder, of low viscosity, for use as a drilling mud for geological exploration and underground water exploitation |
9 | Soundproof- or heat- resistant materials of bazalt | 2508 | 40 | 00 | In sheets |
10 | Marble powder | 2517 | 41 | 00 |
|
11 | Dolomite | 2518 |
|
| In gray and white powder |
12 | P300 cement | 2523 | 29 | 10 | For construction of marine projects |
13 | Thermal cement for drilling wells | 2523 | 90 | 00 |
|
14 | Class-G cement | 2523 | 90 | 00 |
|
15 | Mica | 2525 | 20 | 00 | In white, transparent flakes, of a size of between 16 and 100 mesh |
16 | Felspar | 2529 | 10 | 00 | In white or light-yellow powder or granules |
17 | Industrial oils | 2710 | 19 |
| ISO (150EP, 32TL, 37TL, 46TL, 68TL, 100TL) |
18 | Lubricating oils | 2710 | 99 | 25 | SAE (30ART, 30GD, 40HDGM, 40GD, 50RT, 40RMX, 50RMX, 90TDEP, 140TDEP (GL5)) |
19 | Lubricating grease | 2710 | 19 | 26 | Lithium grease (L2, L3, L4), Cana 1-13, MC 70 |
20 | Hydraulic oils | 2710 | 19 | 27 | VIT32, VIT45, VIT68, VIT100, VIT220 |
21 | Chlohydric acid | 2806 | 10 | 00 |
|
22 | Calcium chloride (CaCl2) | 2827 | 20 | 10 | In white powder |
23 | Bi-potassium alum | 2833 | 30 |
|
|
24 | Limestone (CaCO3) | 2836 | 50 |
| In white powder or granules |
25 | Flour silicate | 2839 | 90 | 00 | In light yellow powder |
26 | Barite API | 2851 | 00 | 90 | In light beige powder |
27 | DMC - Lub | 2942 | 00 | 00 | In viscous form, dark-colored |
28 | Paints for drilling platforms and steel structures | 3208 3209 | 10 90 | 40 90 |
|
29 | Assorted chemical paints | 3209 |
|
| Assorted paints for specific industrial decoration |
30 | Solvent, accompanying paints | 3209 | 90 | 90 | In light yellow powder |
31 | U-F DAK adhesive | 3506 |
|
|
|
32 | DOP plasticizers | 3812 | 20 | 10 |
|
33 | PVC plastic powder | 3904 | 10 |
|
|
34 | Organic siliceous polymer | 3910 |
|
|
|
35 | Wooden boards, for chocking or lining on drilling platforms | 4407 | 99 |
|
|
36 | Labor protection devices | 6210 | 10 |
| Clothes, shoes, boots, helmets, napkins and gloves |
37 | Signboards on drilling platforms | 8310 | 00 | 90 |
|
38 | Other drilling chemicals |
|
|
| Foaming agents, aluminum stearate, surfactants |
LIST
OF RAW MATERIALS, MATERIALS, SUPPLIES AND SEMI-FINISHED PRODUCTS, WHICH CAN BE PRODUCED AT HOME tc "THE LIST OF RAW MATERIALS, MATERIALS AND SEMI-FINISHED PRODUCTS THAT CAN BE PRODUCED AT HOME "
(Promulgated together with Decision No. 827/2006/QD-BKH of August 15, 2006 of the Planning and Investment Minister)tc "(Promulgated together with Decision No.230/2000/QD-BKH of May 4, 2000)"
Ordinal number | Names of goods items | Codes under the Import Tariff | Signs of specifications, description of technical characteristics | ||
Heading | Subheading | ||||
1 | Crude soya oil | 1507 | 10 | 00 |
|
2 | Semi-finished soya oil | 1507 | 90 | 20 |
|
3 | Crude ground-nut oil | 1508 | 10 | 20 |
|
4 | Semi-finished ground-nut oil | 1508 | 90 | 20 |
|
5 | Crude coconut oil | 1513 | 10 | 00 | Crude oil contained in tanks, semi-finished oil on the production chain |
6 | Semi-finished coconut oil | 1513 | 19 | 20 |
|
7 | Crude sesame oil | 1515 | 50 | 10 |
|
8 | Semi-finished sesame oil | 1515 | 50 | 20 |
|
9 | Cane sugar | 1701 | 11 | 00 |
|
10 | Glucose | 1702 | 30 | 10 |
|
11 | Shrimp flavor powder | 2103 | 90 | 20 |
|
12 | Crab soup base | 2103 | 90 | 90 |
|
13 | Tobacco leaves, not stemmed | 2401 | 10 | 00 | Heat-dried yellow, sun-dried brown, burley |
14 | Tobacco leaves, stemmed | 2401 | 20 | 00 | Heat-dried yellow, sun-dried brown, burley |
15 | Tobacco stems | 2401 | 30 | 10 | Big stems, small stems (diameter > 1.5 mm, humidity 9-10%) |
16 | Kitchen salt | 2501 | 00 | 10 |
|
17 | Pure pyrite ore | 2502 | 00 | 00 | FeS2 (>= 33% S) |
18 | Fire clay | 2507 | 00 | 00 |
|
19 | Assorted apatite ores | 2510 | 10 |
| Ca5F(PO4)3 with a gross content of P2O5 >= 24% tc "12 Assorted apatite ores 2510.10 Ca5F(PO4)3 with a gross content of P2O5 >= 24% " |
20 | Granite slates | 2516 |
|
|
|
21 | Marble slates | 2517 | 10 | 90 |
|
22 | Dolomite | 2518 | 10 | 00 |
|
23 | Serpentine ore | 2519 | 90 |
| MgOSiO2.2H2O |
24 | Lime | 2522 |
|
|
|
25 | Portland cement clinkers for manufacture of cement | 2523 | 10 | 00 | PC 30, PC 40, PC 50; Clinker |
26 | Cement of all kinds | 2523 | 10 | 00 | PC 30, PC 40, PC 50 |
27 | Fluoride ore | 2529 |
|
| CaF2 > 75% |
28 | Iron ores | 2601 | 00 | 00 |
|
29 | Agglomerated iron ores | 2601 | 12 | 00 |
|
30 | Manganese ore | 2602 | 00 | 00 | Mn: 35-40% |
31 | Manganese dioxide | 2602 | 00 | 00 | MnO2 >= 68% |
32 | Pure copper ore | 2603 | 00 | 00 | 18-20% Cu |
33 | Pure lead sulfide ore | 2607 | 00 | 00 | 55% Pb |
34 | Assorted zinc ores | 2608 | 00 | 00 | 28-30% Zn |
35 | Pure chromium ore | 2610 | 00 | 00 | 46% Cr2O3 |
36 | Pure wolframite ore | 2611 | 00 | 00 | 65% WO3 |
37 | Pure ilmenite ore | 2614 | 00 | 00 | TiO2: 52-54% |
38 | Pure rutile ore | 2614 | 00 | 90 | TiO2: 90% |
39 | Pure zircon ore | 2614 | 10 | 00 | ZrO2: 62-65% |
40 | Fat coal | 2701 | 12 | 10 |
|
41 | Coke for metallurgy | 2704 | 00 | 10 |
|
42 | Liquefied chlorine | 2801 | 10 | 00 | Cl2 >=99.5% |
43 | Carbon | 2803 | 00 | 10 | Carbon content >= 98% |
44 | Bottled nitrogen | 2804 | 30 | 00 | Nitrogen > 99.95%, liquefied nitrogen > 99.95% |
45 | Bottled oxygen | 2804 | 40 | 00 | In liquefied gas O2 > 99.6% |
46 | Yellow phosphorus | 2804 | 70 | 00 |
|
47 | Pure hydrochloric acid hydrochloric acid | 2806 | 10 | 00 | HCl (KT) >= 30%; pure HCl |
48 | Sulfuric acid | 2807 | 00 | 10 | H2SO4 >=97% |
49 | Phosphoric acid | 2809 | 20 | 00 | H3PO4 >= 98% |
50 | Zinc oxide powder | 2817 | 00 | 10 | 60% Zn, 80-90% ZnO |
51 | Aluminum hydroxide | 2818 | 30 | 00 | Al(OH)3 (>= 63% Al2O3) |
52 | Sodium chloride | 2827 | 39 | 00 |
|
53 | Aluminum sulfate | 2833 | 22 | 00 | Al2 (SO4)3.18 H2O >= 15% Al2O3 Al2 (SO4) 3.14 H2O >= 17% Al2O3 |
54 | Alum | 2833 | 30 |
|
|
55 | Aluminum ammonium sulfate | 2833 | 30 | 12 | AlNH4 (SO4).12 H2O (>= 10.3% Al2O3) |
56 | Disodium carbonate | 2836 | 20 | 00 |
|
57 | Magnesium carbonate | 2836 | 99 | 00 |
|
58 | Sodium silicates | 2839 | 19 | 00 | NaSiO3 Module 2.2-3.4 |
59 | Acetylene | 2901 | 29 | 10 | C2H2 > 99.7% |
60 | Sufactants used for production of cleansing substances (LAS) | 2902 | 90 | 90 |
|
61 | Rutile | 2938 | 10 | 00 |
|
62 | Compounds for production of antibiotics | 2941 | 10 |
| Amoxilin, ampicilin |
63 | Shrimp flavor oil | 3302 | 10 | 10 |
|
64 | Prepared explosives | 3602 | 00 | 00 | Under the Industry Ministry’s Decision No. 03/2006/QD-BCN |
65 | Detonators, fuzes, detonating cords | 3603 |
|
| Under the Industry Ministry’s Decision No. 03/2006/QD-BCN |
66 | Compound plasticizers for rubber or plastic | 3812 | 22 | 00 | DOP plasticizer |
67 | PVC granules | 3904 | 10 | 39 |
|
68 | PVC tubes and pipes | 3917 | 23 | 00 |
|
69 | PVC membranes | 3919 | 90 | 30 |
|
70 | Plastic membranes | 3920 | 43 | 90 | Of a thickness of 0.05 - 0.4 mm |
71 | PVC wall-covering sheets | 3925 | 90 | 00 |
|
72 | Natural rubber | 4001 | 10 |
|
|
73 | Timber and wood chips, of non-coniferous wood | 4401 | 22 | 00 |
|
74 | Small wood pieces for making matches | 4421 | 90 | 20 |
|
75 | Newsprint, in rolls or sheets | 4801 | 00 |
| Of a standard weight of 42-55 g/m2 |
76 | Uncoated paper and paperboard, of a kind used for printing, writing or photocopying, card-making, punch tape paper or waxed base for manufacture of technical paper | 4802 |
|
| Of a standard weight of 40-120g/m2 Excluding those under subheadings of 4802.51.20, 4802.60.20, 4802.30.00, 4802.40.00 and 4802.20.00 |
77 | Paper shoe insoles | 4804 | 19 | 00 | For lining shoes |
78 | Cement packing paper | 4804 | 21 | 10 | Of a standardized weight of 68-75 g/cm2 |
79 | Uncoated and unbleached kraft paper of a low durability (for packing goods and production of small boxes for small articles), and those of a kind already bleached | 4804 | 31 | 00 | 24 TCN 78-99 |
80 | Uncoated paper and paperboard in rolls or sheets: corrugating medium, common type, double-sided Duplex, Duplex with one side in white and another in gray | 4805 |
|
|
|
81 | Toilet paper, table tissue | 4818 | 10 |
|
|
82 | Five-ply cartons | 4819 | 10 | 00 |
|
83 | 200-cigarette cartons with 20 cigarettes in each pack, stiff packs of all kinds | 4819 | 10 | 00 | 385*287 mm |
84 | 200-cigarette cartons with 20 cigarettes in each pack, soft packs of all kinds | 4819 | 10 | 00 | 366*287 mm and 376*287 mm (Paper or paperboard used as packing) |
85 | Paper boxes, each for containing a pair of shoes | 4819 | 10 | 00 |
|
86 | Labels of 20-cigarette stiff packs of all kinds | 4812 | 10 |
| 233.5*99.5 mm |
87 | Base paper, printed, for rolling cigarette filter tips | 4823 | 90 | 91 | Of a standard weight of 28-30 g/cm2 |
88 | Cigarette filter tips | 4823 | 90 | 90 |
|
89 | Sewing thread made of synthetic staple fiber | 5508 |
|
|
|
90 | Yarn (except for sewing thread) made of synthetic staple fiber | 5509 | 11 | 00 |
|
91 | Cotton and polyester shoelaces | 5609 |
|
|
|
92 | Tire cord fabrics, made of high-tenacity fiber | 5902 |
|
|
|
93 | Plastic-coated fabrics | 5903 |
|
| Leatherette, porous leatherette, canvas, soft fabrics |
94 | Rubber-coated fabrics | 5907 |
|
|
|
95 | Packing of textile PP fiber | 6305 | 33 |
|
|
96 | Shoe soles of rubber or plastics | 6406 | 20 | 00 |
|
97 | Granite blocs | 6802 | 23 | 00 |
|
98 | Abrasive powder | 6805 |
|
| Of common-use category |
99 | Ceramic walling and flooring tiles | 6810 | 19 | 10 | Of a maximum size of 400*400 mm |
100 | Corrugated asbestos cement sheets | 6811 | 10 | 00 | Corrugated asbestos cement roofing sheets |
101 | Bricks containing by weight over 50% of alumina | 6902 | 20 | 00 |
|
102 | Chamotte bricks | 6902 | 90 | 00 |
|
103 | Building bricks, flooring tiles, backing tiles | 6904 |
|
|
|
104 | Porcelain sanitary ware | 6910 |
|
| Of common-use category, non-electrically driven |
105 | Medical glass tubes | 7002 |
|
| f 5 - f 32 mm |
106 | Flat white and colored sheet glass | 7003 |
|
| Of common-use category, and a thickness of 1.5 - 12 mm |
107 | Medicine bottles and pots of glass | 7010 |
|
| 2310A-2825CE (from 2 ml to 30 ml)tc "68 Medicine bottles and pots of glass 7010 2301A-2825CE (from 2ml to 30ml)" |
108 | Empty glass ampules for containing injection fluids | 7010 | 10 |
| From 1 to 10 ml (flat bottom, bell- shaped head, needle-shaped tips, in brown or white color) |
109 | Filament lamp envelopes (bulbs) | 7011 | 10 | 00 | A 60 (round-shaped lamps of all kinds) |
110 | Fluorescent lamp envelopes (tubes) | 7011 | 10 |
| f 12 - f 40 mm |
111 | Glass inners of vacuum flasks or other vacuum vessels | 7012 | 00 |
|
|
112 | Gemstones | 7103 |
|
| Ruby, sapphire |
113 | Gold | 7108 | 13 | 10 | 99.99% Au |
114 | Cast iron | 7201 | 20 | 00 |
|
115 | Ferro-alloys: Ferro manganese | 7202 | 11 | 00 | FeMn (65-75%) |
116 | Fero silicon | 7202 | 21 | 00 | FeSi (45%) |
117 | Steel casts | 7206 | 90 | 00 |
|
118 | Steel rods | 7213 | 10 | 10 | f < 100 mm |
119 | Welding rod cores | 7213 | 91 | 10 |
|
120 | Steel rods, non-alloy | 7214 | 10 |
| With a carbon content C > 0.6% |
121 | Steel rods, non-alloy | 7214 | 91 | 00 | Rectangular or square cross-section, C > 0.6%tc "77 Steel rods, non-alloy 7214.91.00 Rectangular or square cross-section, |
122 | Non-alloy steel, in angles, shapes and sections | 7216 | 10 | 00 | in U, I, H shapes, of a height < 80 mm |
123 | Steel in L shape | 7216 | 21 | 00 | L shape, of a height < 80mm |
124 | Steel in U shape | 7216 | 31 | 00 | U shape, of a height of between 80 and 140 mm |
125 | Steel in I shape | 7216 | 32 | 00 | I shape, of a height of between 80 and 140 mm |
126 | Steel in H shape | 7216 | 33 | 00 | H shape, of a height of between 80 and 140 mm |
127 | Steel in C and V shapes | 7216 | 50 | 00 | C, V shapes, of a height of between 80 and 140 mm |
128 | Tubes and pipes of cast iron | 7303 | 00 | 00 | Of common-use category |
129 | Welded steel tubes and pipes | 7305 |
|
| Of common-use category, between 20 and 114 mm in diameter |
130 | Steel structures | 7308 |
|
| Of common-use category and house steel frames, road bridge steel beams of a span of up to 100 m and a load of H30; steel railway bridge steel beams of a span of up to 100 m and a load of T26 |
131 | Reservoirs and tanks | 7309 | 00 |
| Of common-use category |
132 | Drum-shaped containers | 7310 |
|
| Of common-use category |
133 | Iron grill, netting and fence | 7314 |
|
| Of common-use category |
134 | Chains | 7315 |
|
| Of common-use category |
135 | Common-use bolts + nuts | 7318 |
|
| Of common-use category |
136 | Grinding steel balls | 7325 | 91 | 10 | Of common-use category |
137 | Cast molds | 7325 | 99 | 00 |
|
138 | Copper wire for use as raw materials | 7408 | 11 | 00 | Raw material copper for manufacture of electric cable f 6 - f 14 mm |
139 | Uncoated copper cables | 7413 |
|
|
|
140 | Uncoated (non-alloy) aluminum cables | 7414 | 90 |
| Of a cross section of up to 600 mm2 |
141 | Uncoated aluminum cables with steel cores | 7914 | 10 |
| Of a cross section of up to 600 mm2 |
142 | Aluminum profiles | 7610 |
|
| Of common-use type |
143 | Aluminum nettings | 7616 | 91 | 00 |
|
144 | Lead bars | 7803 | 00 | 10 | 99.6% Pb |
145 | Zinc powder, dust and flakes (sulfate) | 7903 | 90 | 00 | 48-50% Zn |
146 | Tin bars | 8003 | 00 | 10 | 99.75% Sn |
147 | Handsaws, saw blades of all kinds | 8202 |
|
| Of common-use type |
148 | Plows, scarifiers and harrows | 8432 |
|
| Of common-use type, trailed by tractors |
149 | Fluorescent lamp heads | 8539 | 90 | 61 | G13/12*30(26) |
150 | Cables coated with PE, PVC | 8544 | 11 | 30 | All kinds |
151 | Electric wire of all kinds | 8544 |
|
| Excluding co-axial cables |
LIST
OF RAW MATERIALS, SUPPLIES AND SEMI-FINISHED PRODUCTS IN SERVICE OF SHIPBUILDING INDUSTRY, WHICH CAN BE PRODUCED AT HOME tc "THE LIST OF RAW MATERIALS, MATERIALS AND SEMI-FINISHED PRODUCTS THAT CAN BE PRODUCED AT HOME "
(Promulgated together with Decision No. 827/2006/QD-BKH of August 15, 2006 of the Planning and Investment Minister)tc "(Promulgated together with Decision No.230/2000/QD-BKH of May 4, 2000)"
Ordinal number | Names of goods items | Codes under the Import Tariff | Signs of specifications, description of technical characteristics | ||
|
| Heading | Subheading |
| |
1 | Wall panels | 3925 | 90 | 00 | BM25, BM50 (of fire protection level B-15) |
2 | Ceiling panels | 3925 | 90 | 00 | CC25, CC75 (of fire protection levels B-0; B-15) |
3 | Fire doors | 3925 | 90 | 00 | B-15; A-0; A-60 |
4 | Welding wires | 8311 | 20 |
| NAEH14, sized f 2.4; f 3.2; f 4.0 |
5 | Welding rods | 8311 | 30 |
| NA7018, sized f 2.5; f 3.25; f 4.0; f 5.0 - f 5.4 |
6 | Ship boilers | 8402 | 11 |
| Of a capacity of between 0.5 and 35 tons of steam/h |
